===================== Product Identification =====================
MSDS NAME:EA 934 PART A
NIIN:00-810-5414
MSDS Number: BFQHY
=== Responsible Party ===
Company:DEXTER CORP. HYSOL DIVISION
Emergency Phone Num:415-687-4201
CAGE:1JB33
=== Contractor Identification ===
Company:DEXTER CORP THE DEXTER ELECTRONIC MATERIAL DIV
Address:211 FRANKLIN ST.
Box:City:OLEAN
State:NY
ZIP:14760-1297
Country:US
Phone:716-372-6300/6309
CAGE:04347
Company:DEXTER CORP THE HYSOL DIV
Address:1 DEXTER DR
Box:City:SEABROOK
State:NH
ZIP:03874
Country:US
Phone:603-474-5541/FAX: 603-474-5545
CAGE:1JB33
============= Composition/Information on Ingredients =============
Name:EPOXY RESINS
Fraction by Wt: 58.0%
Name:ASBESTOS (AMIANTHUS, OBSOLETE AMOSITE), (FOR OSHA PEL, SEE
29CFR 1910.1101)
CAS:1332-21-4
RTECS #:CI6475000
Fraction by Wt: 14.0%
OSHA PEL:0.2 FIBERS/CC
ACGIH TLV:0.5 FIBERS/CC; A1;89
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:FILLERS,UNSPECIFIED
Fraction by Wt: 28.0%
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE EYE IRRITATION SKIN SENSITIZATION OR
OTHER ALLERGIC RESPONSES.
======================= First Aid Measures =======================
First Aid:WASH SKIN IMMEDIATELY WITH SOAP AND WATER. FLUSH EYES
IMMEDIATELY WITH PLENTY OF WATER.
===================== Fire Fighting Measures =====================
Flash Point:> 200 F, 93C TCC
Extinguishing Media:CHEMICAL FOAM,DRY CHEMICALS, CO*2
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE LIBERATED
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE EXCESS. CLEAN WITH SOLVENTS.
====================== Handling and Storage ======================
Handling and Storage Precautions:A MASK FOR ASBESTOS IS NOT NECESSARY
UNLESS THE CURED ADHESIVE IS DRY SANDED, ABRADED, ETC.
Other Precautions:FOLLOW THE RECOMMENDED STORAGE CONDITIONS: 3 MONTHS @
77 F, 1 YR. @ 40 F, 2 YRS @ 0 F. ANSI CLASSIFICATION 4
============= Exposure Controls/Personal Protection =============
Respiratory Protection:APPROVED NIOSH RESPIRATOR AND MASK FOR ASVESTOS.
(SEE PRECAUTIONS)
Ventilation:LOCAL EXHAUST OR MECHANICAL VENTILATION REQUIRED.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.55
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS GREY PASTE WITH SLIGHT ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:NO
Stability Condition to Avoid:SEE STORAGE RECOMMENDATIONS
Hazardous Decomposition Products:COMPOUNDS OF CARBON AND NITROGEN
Conditions to Avoid Polymerization:AVOID HEATING LARGE MASSES TOO HIGH
IN TEMP.
==================== Disposal Considerations ====================
Waste Disposal Methods:LAND BURIAL
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|