=====================  Product Identification  =====================

MSDS NAME:RED 11105
NIIN:00-889-7345
MSDS Number: BFTYF
=== Responsible Party ===
Company:PRATT & LAMBERT-WICHITA DIV
Address:945 BURLINGTON
Box:206
City:KANSAS CITY
State:MO
ZIP:64141
Country:US
CAGE:KO010
=== Contractor Identification ===
Company:PRATT & LAMBERT-WICHITA DIV.
Box:2153
CAGE:KO010
Company:PRATT AND LAMBERT INC
Address:945 BURLINGTON
Box:206
City:KANSAS CITY
State:MO
ZIP:64141
Country:US
CAGE:92216

=============  Composition/Information on Ingredients  =============

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: >50%
OSHA PEL:100 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION:ANESTHETIC,IRRITATION OF THE
    RESPIRATORY TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION CHARACT

=======================  First Aid Measures  =======================

First Aid:IN CASE OF CONTACT,FLUSH SKIN & EYES WITH PLENTY OF WATER
    WHILE REMOVING CONTAMINATED CLOTHING.IF INHALED,REMOVE TO FRESH
    AIR.CALL A MD. IF SYMPTOMS PERSIST.

=====================  Fire Fighting Measures  =====================

Flash Point:104F
Lower Limits:1.10
Extinguishing Media:USE NATIONAL FIRE PROTECTION ASSOC.(NFPA)CLASS B
    EXTINGUISHE
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS SHOULD BE
    AVAIL FOR FIREM
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED.ISOLATE
    FROM HEAT,ELECTRICAL EQUIPMENT,SPARKS AND OPEN FLAME.CLOSED

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES,HOT
    SURFACES,AND ELECTRICAL,STATIC,OR FRICTIONAL SPARKS)AVOID BREATHING
    VAPORS.VENTILATE AREA.REMOVE WITH INERT ABSORBENT & NON-SPARKING
    TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LARGE
    QUANTITIES IN BUILDING DESIGNED TO COMPLY WITH OSHA 1910.106.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING.AVOID FREE
    FALL OF LIQUID IN EXCESS OF A FEW INCHES.DO NOT FLAME CUT,BRAZE OR
    WELD COATED MATERIAL WITHOUT BUREAU OF MINES APPROVED RESPIRATOR OR
    APP

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR OR OPEN AREAS,USE BUREAU OF MINES
    APPROVED MECHANICAL FIL
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
    VOL
Protective Gloves:REQUIRED
Eye Protection:SAFETY EYEWEAR DESIGNED
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
    CONTAMINATED CLOTHING.
Supplemental Safety and Health
USE NATIONAL FIRE PROTECTION ASSOC.(NFPA) CLASS B EXTINGUISHERS (CARBON
    DIOXIDE,DRY CHEMICAL OR ALCOHOL FOAM)DESIGNED TO EXTINGUISH NFPA
    CLASS FIRES. POLYMER FOAM PREFERRED AT STANDARD APPLICA

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:311-373F
Percent Volatiles by Volume:66

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES,HEAT,AND HOT SURFACES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE,& FEDERAL
    REGULATIONS.INCINERATE IN APPROVED FACILITY. DO NOT INCINERATE
    CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***