=====================  Product Identification  =====================

MSDS NAME:PETROTECT VAP - MIL-P-46002A(MR)GD1(4085)
NIIN:00-889-3523
MSDS Number: BFTXJ
=== Responsible Party ===
Company:PENRECO, DIV OF PENNZOIL CO.
Emergency Phone Num:412-445-2687
CAGE:86459
=== Contractor Identification ===
Company:PENRECO, DIV OF PENNZOIL CO
Address:700 MILIAM ST
Box:2967
City:HOUSTON
State:TX
ZIP:77252
Country:US
Phone:800-245-3952
CAGE:86459

=============  Composition/Information on Ingredients  =============

Name:NO HAZARDOUS INGREDIENTS IDENTIFIED BY MFR.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE BURN & IRRIT. SKIN
    IRRIT,DERM,DROW,PNEUMONIA,COMA

=======================  First Aid Measures  =======================

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
    DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
    W/SOAP & WATER. RMV CONTAM CLTHG & SHOES. INGEST:DO NOT INDUCE
    VOMIT. NOTHG BY  MOUTH IF UNCONSC. GET MEDICAL ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:240F,115.5C(COC)
Autoignition Temp:Autoignition Temp Text:>600F
Extinguishing Media:FOAM,DRY CHEMICAL,CO*2
Fire Fighting Procedures:WEAR SCBA. TREAT AS OIL FIRE,COOL CONTAIN
    W/WATER SPRAY.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHEN
    BURNING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENT AREA. PLACE SPILL IN DISPOSAL CONTAINERS.
    ABSORB SPILL W/INERT MATL & PLACE IN DISPOSAL CONTAIN. CLEAN UP
    RESIDUE W/SOAP & WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN SEALED CONTAIN AWAY FM HEAT,
    OPEN FLAME & OXIDIZING MATL. KEEP FIRE EXTINGUISHERS READILY AVAIL.
Other Precautions:DO NOT TRANSFER TO UNMARKED CONTAINERS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROV RESP W/CART FILTER
Ventilation:MECHANICAL (GEN) REQUIRED
Protective Gloves:RUBBER
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:APRON & BOOTS MAY BE WORN TO PROTECT
    SENSITIVE SKIN.
Supplemental Safety and Health
MSDS DATED 11 JULY, 1981. GRADE 1 OF MIL-P-46002B & AMD 3

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:400F,204C
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:0.9
Evaporation Rate & Reference:SLOWER THAN EE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER TRANSPARENT FLUID. PETROLEUM ODOR
Percent Volatiles by Volume:8

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE I/A/W ALL LOCAL,STATE &
    FED REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***