=====================  Product Identification  =====================

MSDS NAME:ANDEROL SYNTHETIC LUBRICATING GREASE 735
NIIN:00-889-3522
MSDS Number: BFTXG
=== Responsible Party ===
Company:TENNECO CHEM, INC - INTERMEDIATES DIV
Emergency Phone Num:301-778-1991
CAGE:GO844
=== Contractor Identification ===
Company:TENNECO CHEM, INC - INTERMEDIATES DIV
CAGE:GO844
Company:TENNECO CHEMICALS INC ORGANIC AND POLYMERS DIV
Address:TURNER PL
Box:365
City:PISCATAWAY
State:NJ
ZIP:08854
Country:US
Phone:908-981-5000
CAGE:99559

=============  Composition/Information on Ingredients  =============

Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

=====================  Hazards Identification  =====================

Effects of Overexposure:PRLNGD/RPTD SKIN/EYE CNTCT MAY CAUSE IRRIT.
    PRLNGD BRTHNG OF CONC MIST AT HIGH TEMP MAY IRRIT LUNGS.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH IMMED W/PLENTY WATER
    15 MIN. INH: REMOVE TO FRESH AIR. MFR STATES LOW DEGREE OF HAZ FOR
    THIS PROD, OBSERVE ORDINARY MEASURES OF PERSONAL HYGIENE.

=====================  Fire Fighting Measures  =====================

Flash Point:>300F
Extinguishing Media:WATER SPRAY, FOAM, CO*2, DRY CHEM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:BURNING MAY PROD SM AMTS TOXIC FUMES.
    AVOID EXPOSURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE UP & REMOVE TO DISPOSAL CNTNR. CLEAN UP
    AREA W/DETERGENT & WATER IF SLIPPERY.

======================	Handling and Storage  ======================

Handling and Storage Precautions:ORDINARY CARE IN HANDLING CHEM

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:PRLNGD/RPTD EXP TO CONC HOT FUMES/MIST. USE
    AIRLINE RESP
Ventilation:MECH EXHST ACCEPTABLE
Protective Gloves:YES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:WASH CONTAM CLOTHING BEFORE REUSE
Supplemental Safety and Health
PROD NOT VOLATILE. SPEC GRAV IS 0.9-1.0. DROPPING PT IS 360-500F.

==================  Physical/Chemical Properties  ==================

HCC:V6
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT TO DARK GREASE, SLIGHT MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS, ACIDS & BASES. MAY SOFTEN PLASTIC/PAINT.
Hazardous Decomposition Products:BURNING MAY PROD SM AMTS TOXIC FUMES
    OR NITROGEN OXIDES

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURY IN APPRVD LANDFILL. OBSERVE LOCAL, STATE,
    FED REG. DO NOT CONTAM ANY STREAMS, LAKES, PONDS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***