=====================  Product Identification  =====================

MSDS NAME:742-102;TT-E-489F COMPL,CLA 11105 RED
NIIN:00-889-7345
MSDS Number: BFTXZ
=== Responsible Party ===
Company:PRATT & LAMBERT-WICHITA DIV.
Emergency Phone Num:(316) 733-1361
CAGE:KO010
=== Contractor Identification ===
Company:PRATT & LAMBERT-WICHITA DIV.
Box:2153
CAGE:KO010

=============  Composition/Information on Ingredients  =============

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: >50%.
OSHA PEL:100 PPM

Name:TOLUIDINE RED
CAS:2425-85-6
RTECS #:QK4247000

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

Effects of Overexposure:INH:ANESTHETIC,IRRIT OF RESP TRACT OR ACUTE CNS
    DEPRSSN W/HDACHE,DIZ,UNCON,COMA.SKIN & EYE:IRRIT

=======================  First Aid Measures  =======================

First Aid:IN CASE OF CONTACT,FLUSH SKIN & EYES W/PLENTY OF WATER WHILE
    REMOVING CONTAMINATED CLOTHING.IF INHALED,REMOVE TO FRESH AIR.CALL
    A PHYSICIAN IF SYMPTOMS PERSIST

=====================  Fire Fighting Measures  =====================

Flash Point:104F TCC
Lower Limits:1.1
Extinguishing Media:SM FIRES:CO*2,DRY CHEM. LG FIRES:POLYMER FOAM
    PREFERRED
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
    EXPLODE DUE TO PRESSURE BUILD UP.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAME,HOT
    SURFACES, & ELECTRICAL,STATIC, OR FRICTIONAL SPARKS).AVOID
    BREATHING VAPORS.VENTILATE AREA.REMOVE W/INERT ABSORBENT &
    NON-SPARKING TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTY
    IN BUILDINGS DESIGNED TO COMPLY W/OSHA 1910.106.DO NOT TAKE
    INTERNALLY.ADD LABEL WARNING
Other Precautions:GROUND CONTAINERS WHEN POURING.AVOID FREE FALL OF LIQ
    IN EXCESS OF FEW IN. DO NOT FLAME CUT,BRAZE OR WELD COATED MATERIAL
    W/O APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.
    DOT:COMBUSTIBLE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD. RESTRICT VENT.CHEM-MECH
    FLTR.CLSD:AIR-LINE TYPE
Ventilation:GEN DILTN/LOCAL EXHST TO KEEP TLV/LEL BELOW LIMIT,REMV FUME
Protective Gloves:YES
Eye Protection:YES,FOR SPLASH
Other Protective Equipment:AVOID LONG EXPOSURE TO CONTAM CLOTHING
Supplemental Safety and Health
ADDRESS:630 EAST 13TH,ANDOVER,KS 67002.THIS PRODUCT IS AN ENAMEL ALKYD
    GLOSS.VAPOR PRESSURE BASED ON MINERAL SPIRITS IS 3.2.VAPOR DENSITY
    :HEAVIER THAN AIR.WT PER GAL:7.8 LBS.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:311-373F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:62.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES,HEAT & HOT SURFACES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINER.DISPOSE IN
    ACCORDANCE W/ FED.,STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***