===================== Product Identification =====================
MSDS NAME:BLUE TOOL MAKERS INK 16358
NIIN:01-015-0834
MSDS Number: BGDLX
=== Responsible Party ===
Company:AMERICAN OVERSEAS INDUSTRIES, DIST - SEYMOUR, MFR
Address:RICHMOND INTERNATIONAL AIRPORT
Box:H
City:RICHMOND
State:VA
ZIP:23150
Country:US
CAGE:9S525
=== Contractor Identification ===
Company:AMERICAN OVERSEAS INDUSTRIES CORP
Address:RICHMOND INTERNATIONAL AIRPORT
Box:H
City:RICHMOND
State:VA
ZIP:23150
Country:US
CAGE:9S525
============= Composition/Information on Ingredients =============
Name:ISOPROPYL ACETATE
CAS:108-21-4
RTECS #:AI4930000
Fraction by Wt: 14.4%
OSHA PEL:250 PPM/310 STEL
ACGIH TLV:250 PPM/310STEL;9192
Name:ACETONE (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 39.6%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 3.74%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 11.0%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192
Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 11.0%
===================== Hazards Identification =====================
Effects of Overexposure:ANESTHETIC IRRIT OF RESP TRACT OR ACUTE NERVOUS
SYSTEM DEPRESSION, HDACHE, COMA.
======================= First Aid Measures =======================
First Aid:FUMES: REMOVE FROM EXPOSURE, RESTORE BRTHNG. KEEP WARM/QUIET.
NOTIFY DOCTOR. EYES: FLUSH W/COPIOUS QTY RUNNING WATER FOR AT LEAST
15 MIN. TAKE TO MD FOR MED TREATMENT. SKIN: REMOVE W/SOAP & WATER,
REM OVE CONTAM CLOTHING.
===================== Fire Fighting Measures =====================
Flash Point:-10F
Lower Limits:1.10
Upper Limits:2.55
Extinguishing Media:CO*2, DRY CHEM, FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. USE H*2O TO
COOL CNTNRS.
Unusual Fire/Explosion Hazard:EXPOSURE TO HEAT MAY BE CAUSE OF BURSTING
AEROSOL CAN
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, AVOID BRTHNG
VAPORS, VENT AREA.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. EXPOSURE TO
HEAT OR PROLONGED EXPOSURE TO SUN MAY CAUSE BURSTING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AVOID CONTINUOUS BRTHNG OF VAPORS & SPRAY MIST
Ventilation:USE W/ADEQUATE VENT
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
FSCM 9S525 FOR DISTRIBUTOR AMERICAN OVERSEAS INDUSTRIES CORP, SINCE MFR
SEYMOUR OF SYCAMORE, INC FSCM NOT AVAILABLE DUE TO THEM NOT HAVING
ONE ASSIGNED.
================== Physical/Chemical Properties ==================
HCC:V3
Appearance and Odor:LIQUID, ODOR OF ALCOHOL & ACETONE
Percent Volatiles by Volume:85.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:MAY PRODUCE HAZ FUMES WHEN HEATED TO
DECOMP, CO
==================== Disposal Considerations ====================
Waste Disposal Methods:DO NOT INCINERATE AEROSOL, DISPOSE OF IAW LOCAL,
STATE, FED REG.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|