=====================  Product Identification  =====================

MSDS NAME:S60-040, CHEM BLEND AUTO DEVELOPER,PART-A
NIIN:01-014-5836
MSDS Number: BGDLB
=== Responsible Party ===
Company:H.R.SIMON AND COMPANY, INC.
Address:3515 MARMENCO COURT
City:BALTIMORE
State:MD
ZIP:21230
Country:US
Info Phone Num:301-636-5555
Emergency Phone Num:301-636-5555
CAGE:KO370
=== Contractor Identification ===
Company:H.R.SIMON AND COMPANY,INC.
Address:3515 MARMENCO COURT
City:BALTIMORE
State:MD
ZIP:21230
Country:US
Phone:301-636-5555
CAGE:KO370
Company:SIMON H R CO,INC.
Address:3515 MARMENCO COURT
Box:City:BALTIMORE
State:MD
ZIP:21230-3411
Country:US
Phone:410-636-5555
CAGE:27912

=============  Composition/Information on Ingredients  =============

Name:POTASSIUM HYDROXIDE  (SARA III)
CAS:1310-58-3
RTECS #:TT2100000
Fraction by Wt: 03.0%
OSHA PEL:C, 2 MG/M3
ACGIH TLV:C 2 MG/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:HYDROQUINONE  (SARA III)
CAS:123-31-9
RTECS #:MX3500000
Fraction by Wt: 07.0%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:WATER, CAS #7732-18-5
CAS:7732-18-5
RTECS #:ZC0110000

Name:SODIUM HYDROXIDE  (SARA III)
CAS:1310-73-2
RTECS #:WB4900000
OSHA PEL:2 MG/M3
ACGIH TLV:C 2 MG/M3; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:EYES/SKIN:MOD TO SEV IRRIT.MAY CAUSE ALLERGIC
    REACTION ON PROLONGED CONTACT,MAY CAUSE EYE BURNS.

=======================  First Aid Measures  =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
    NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
    GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
    SYMPTOMS OF OVEREXPOSURE.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:WATER,DRY CHEMICAL,FOAM,CO*2
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
    CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP LEAK.
    EVACUATE AREA.DO NOT TOUCH SPILLAGE. SM SPILL:ABSORB W. INERT
    ABSORBENT. PLACE IN CLOSED CONTAINER. FLUSH AREA W. WATER. LG
    SPILL: DIKE AHEAD FOR LATER DISPOSAL.  NOTIFY AUTHORITIES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
    AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
    CONTAINERS TIGHTLY CLOSED
Other Precautions:STORE BETWEEN 40F-90F;DO NOT BREATHE VAPORS/MIST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS FROM SIMON & CO RECEIVED ON 2/19/87 WAS NOT DATED BY THE MFR;THIS
    DESCRIBES PART-A OF A 3 PARTS KIT; SEE P/N IND B & C FOR OTHER
    PARTS; KEY1:Y01; PH APPROX:11.6

==================  Physical/Chemical Properties  ==================

HCC:B1
Boiling Pt:B.P. Text:>212F/>100C
Vapor Pres:18
Vapor Density:0.6
Spec Gravity:1.29
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID.SLIGHT INDISTINGUISHABLE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND/OR STRONG ACIDS
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:AMMONIA,OXIDES OF N,S & C IF INVOLVED
    IN FIRE/COMBUSTION

====================  Disposal Considerations  ====================

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
    DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
    INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***