=====================  Product Identification  =====================

MSDS NAME:SCOTCHCAST 9 RESIN (5240), PART B
NIIN:01-014-3480
MSDS Number: BGDKZ
=== Responsible Party ===
Company:3M COMPANY - ELECTRICAL PRODUCTS DIVISION
Address:3M CENTER
City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Emergency Phone Num:612-733-1110
CAGE:75037
=== Contractor Identification ===
Company:MINNESOTA MINING AND MFG CO ELECTRICAL PRODUCTS DIV
Address:3M AUSTIN CTR
Box:City:AUSTIN
State:TX
ZIP:78769-2963
Country:US
Phone:512-984-1800
CAGE:75037

=============  Composition/Information on Ingredients  =============

Name:FATTY ACID AMIDE, WT% RANGE 50-55%
Fraction by Wt: 52.5%
Other REC Limits:NOT GIVEN

Name:AROMATIC HYDROCARBON RESIN, WT% RANGE 10-15%
Fraction by Wt: 12.5%
Other REC Limits:NONE GIVEN

Name:NONYL PHENOL, WT% RANGE 1.0-5.0%
CAS:25154-52-3
RTECS #:SM5600000
Fraction by Wt: 3%.
Other REC Limits:NOT GIVEN

Name:MICA - SILICATES (< 1% CRYSTALLINE SILICA)
CAS:12001-26-2
RTECS #:VV8760000
Other REC Limits:NOT GIVEN
OSHA PEL:20 MPPCF
ACGIH TLV:3 MG/M3 RDUST; 9293

Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Other REC Limits:NOT GIVEN
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192

Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Other REC Limits:NOT GIVEN
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:POSSIBLE IRRITANT AND SENSITIZER.
Effects of Overexposure:EYE: MODERATE IRRITATION. SKIN: IRRITATION,
    POSSIBLE SENSITIZATION. POSSIBLE HARMFUL EFFECT IF ABSORBED.
    INHALATION: RESPIRATORY SYSTEM IRRITATION & SENSITIZATION.
    INGESTION: POSSIBLE GI TRACT IRRITAT ION, TISSUE & TRACT DAMAGE.
Medical Cond Aggravated by Exposure:ANY PRE-EXISTING ALLERGY OR
    SENSITIVITY.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH 10-15 MINUTES W/AMPLE WATER. SKIN: WASH EXPOSED
    AREA W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: IF
    CONSCIOUS GIVE 1-2 GLASSES WATER. CALL PHYSICIAN IMMEDIATELY IF
    SYMPTOMS  PERSIST.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>350F/>177C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA PP MODE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:OBSERVE ALL PRECAUTIONS GIVEN. SCOOP OR SHOVEL
    VISCOUS MATERIAL INTO CLOSED CONTAINERS, COLLECT REMAINDER WITH
    RAGS. WASH AREA W/DETERGENT SOLUTION.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE IN WELL-VENTILATED AREAS. USE
    LOCAL EXHAUST FOR MIXING, POURING, CURING, AND COOL-DOWN AREAS.
Other Precautions:AVOID EYE,SKIN CONTACT. DO NOT INHALE VAPORS OR
    INGEST COMPONENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE CCROV RESPIRATOR IF VENTILATION IS
    INADEQUATE.
Ventilation:USE LOCAL EXHAUST FOR MIXING, POURING, CURING, COOL-DOWN
    AREAS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:APRON, SLEEVES TO PROTECT SKIN.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health
ENTRY PER 3M MSDS DOC #10-2580-8 DATED 10OCT85. PART B OF TWO-PART A/B
    KIT.KEY1;N1.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:1.28
Viscosity:200 P
Solubility in Water:NEG
Appearance and Odor:BROWN VISCOUS LIQUID, SLIGHT AMMONIA ODOR
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXCESS HEAT, IGNITION SOURCES
Hazardous Decomposition Products:CARBON, NITROGEN OXIDES, MICA & TALC
    DUST & PARTICLES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR LANDFILL ABSORBED MATERIAL IAW ALL
    LAWS & REGULATIONS. FULLY CURED RESIN MAY BE LANDFILLED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***