=====================  Product Identification  =====================

MSDS NAME:45F272FB
NIIN:01-019-8871
MSDS Number: BGDYC
=== Responsible Party ===
Company:GENERAL ELECTRIC CAPACITOR PROD DEPT
Address:JOHN ST
City:HUDSON FALLS
State:NY
ZIP:12839
Country:US
Emergency Phone Num:518-746-5750
CAGE:01002
=== Contractor Identification ===
Company:GENERAL ELECTRIC CO CAPACITOR PRODUCTS DEPARTMENT
Address:JOHN ST
Box:City:HUDSON FALLS
State:NY
ZIP:12839
Country:US
Phone:518-746-5750
CAGE:01002

=============  Composition/Information on Ingredients  =============

Name:POLYCHLORINATED BIPHENYLS (PCBS)  (SARA III)
CAS:1336-36-3
RTECS #:TQ1350000
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION: RESPIRATORY TRACK IRRITATION;
    SKIN/EYE: IRRITATION, INFLAMMATION, CHLORACNE; MAY CAUSE LIVER
    DAMAGE

=======================  First Aid Measures  =======================

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG, GIVE CPR. IF BRTHNG
    DIFF, GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
    W/SOAP&WATER. RMV CONTAM CLTHG&SHOES. INGEST:INDUCE VOMIT. RPT
    UNTIL VOMIT IS  CLEAR. NOTHG BY MOUTH IF UNCONSC. GET MEDICAL ATT

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:EXTINQUISH W. AGENT SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR CHEMICAL PROTECTIVE SUIT WITH SELF CONTD
    BRTHG APP.
Unusual Fire/Explosion Hazard:MATL IS NON-FLAMMABLE BUT MAY GENERATE
    TOXIC GASES IN HEAT OF FIRE

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVAC NON-ESSENTL PERSONNEL. VENT SPIL AREA.
    WEAR PROTECT EQUIPT. STOP LEAK. SOAK UP LIQUID W/NON-REACTIVE MATL
    (SAND, DIRT, ETC) OR RMV BY DIKE & PUMPING OR OTHER SUITABLE MEANS.
    CLEAN AREA W/SUITABLE  SAFETY SOLVENT. LAUNDER CONTAMINATED CLTHG.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
    AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
    CONTAINERS TIGHTLY CLOSED
Other Precautions:CHLORODIPHENYLS MAY ATTACK SOME TYPES OF RUBBER AND
    PLASTIC. DO NOT USE CONTAMINATED WORK CLOTHING. WASH/SHOWER AFTER
    EXPOSURE TO PCB'S.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MESA APPR SCBA/AIR SUPP RESPIR.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:WEAR FULL PROTECTIVE CLOTHING.
Supplemental Safety and Health
OVEREXPOS:CAN CAUSE FORMATION OF CYSTS,CAUSES STILLBIRTHS.IRRITATES
    EYES,NOSE THROAT.

==================  Physical/Chemical Properties  ==================

HCC:Z3
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE YELLOW VISCOUS LIQUID W/ HYDROCARBON ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:SEE OTHER PRECAUTIONS
Hazardous Decomposition Products:HYDROGEN CHLRORIDE, CO, & OTHER
    TOXIC/IRRITATING GASES/FUMES

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTROLLED DISPOSAL REQD. GEN. V.HIGH TEMP
    INCINERATION. IN ACCORDANCE WITH ALL LOCAL, STATE, & FEDERAL
    REGULATIONS. PERMITTED DISPOSAL OPERATOR REQUIRED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***