=====================  Product Identification  =====================

MSDS NAME:REPAIR LIQUID
NIIN:01-020-1426
MSDS Number: BGDYL
=== Responsible Party ===
Company:CAULK/DENTSPLY
Address:LAKEVIEW AND CLARKE AVE
Box:359
City:MILFORD
State:DE
ZIP:19963
Country:US
Info Phone Num:302-422-4511
Emergency Phone Num:302-422-4511
CAGE:11107
=== Contractor Identification ===
Company:CAULK/DENTSPLY
Address:38 W CLARKE AVE
Box:359
City:MILFORD
State:DE
ZIP:19963-0359
Country:US
Phone:302-422-4511/ 703-451-1900
CAGE:11107

=============  Composition/Information on Ingredients  =============

Name:METHYL METHACRYLATE  (SARA III)
CAS:80-62-6
RTECS #:OZ5075000
Fraction by Wt: 92.5%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ETHYLENE GLYCOL DIMETHACRYLATE
CAS:97-90-5
RTECS #:KW5500000
Fraction by Wt: 7.5%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF EYES,SKIN,AND
    RESPIRATORY TRACT;HEADACHE,NAUSEA,POSSIBLE CORNEAL DAMAGE.
    CHRONIC:RESPIRATORY PROBLEM AND POSSIBLE EYES DAMAGE.
Effects of Overexposure:SEE HEALTH HAZARDS DATA.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE.

=======================  First Aid Measures  =======================

First Aid:SKIN AND EYES:FLUSH WITH PLENTY OF WATER FOR ABOUT 15
    MINUTES;CALL A PHYSICIAN. INHALATION:REMOVE TO FRESH AIR.CALL A
    PHYSICIAN IF NEEDED. INGESTION:IF CONSCIOUS,INDUCE VOMITING AND
    CONSULT A PHYSICIA N IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:50F/10C
Lower Limits:2.1
Upper Limits:12.5
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
    AREA.
Unusual Fire/Explosion Hazard:EXCESSIVE HEAT MAY RUPTURE CONTAINERS
    WITH EXPLOSION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PROPER PERSONAL PROTECTION;CONTAIN FREE
    LIQUID IF POSSIBLE;USE INERT ABSORBENT MATERIAL AND COLLECT FOR
    PROPER DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY AREA;USE WITH AN
    ADEQUATE VENTILATION;KEEP AWAY FROM HEAT,OPEN FLAMES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
    VAPORS AND MIST OR SCBA IN AN ENCLOSED AREA IF ABOVE PEL/TLV.
Ventilation:LOCAL EXHAUST (EXPLOSION PROOF).
Protective Gloves:IMPERVIOUS.
Eye Protection:SPLASH PROOF GOGGLES.
Other Protective Equipment:APRON,IMPERVIOUS BOOTS,EYE-WASH/SAFETY
    SHOWER.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;DO NOT BREATHE
    VAPORS/MIST.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:=101.1C, 214.F
Vapor Pres:29
Vapor Density:3.45
Spec Gravity:0.94
Solubility in Water:SLIGHT
Appearance and Odor:COLORLESS LIQUID.
Percent Volatiles by Volume:92.5

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZER.
Stability Condition to Avoid:EXTREME HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:ACRID FUMES & CO AND/OR CO*2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
    LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***