===================== Product Identification =====================
MSDS NAME:DOW CORNING Q2-1143 SILICONE BRAKE FLUID
NIIN:01-102-9455
MSDS Number: BGLXN
=== Responsible Party ===
Company:DOW CORNING CORP
Address:3901 SOUTH SAGINAW ROAD
Box:997
City:MIDLAND
State:MI
ZIP:48640
Country:US
Info Phone Num:517-496-6000
Emergency Phone Num:517-496-5900
Preparer's Name:JACK L. SHENEBERGER
CAGE:5D028
=== Contractor Identification ===
Company:DOW CORNING CORP
Address:3901 S SAGINAW RD
Box:997
City:MIDLAND
State:MI
ZIP:48686-0997
Country:US
Phone:517-496-6000/517-496-6315
CAGE:5D028
Company:DOW CORNING CORP
Address:2200 W SALZBURG RD
Box:City:AUBURN
State:MI
ZIP:48611
Country:US
Phone:517-496-4388
CAGE:71984
============= Composition/Information on Ingredients =============
Name:SILICONE FLUID
Other REC Limits:5 MG/M3 OIL MIST
Name:DIOCTYL SEBACATE
CAS:122-62-3
Fraction by Wt: 3%
Name:TRIBUTYL PHOSPHATE
CAS:126-73-8
RTECS #:TC7700000
Fraction by Wt: 2%
OSHA PEL:5 MG/M3
ACGIH TLV:0.2 PPM; 9293
Name:DIMETHYL,METHYL SILICONE RESIN
CAS:68037-74-1
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE GIVEN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MILD IRRITANT.
Explanation of Carcinogenicity:MFR LETTER 11 SEPT 87,CERTIFIES "THERE
IS NO EVIDENCE THAT DC 2-1143 SILICONE BRAKE FLUID HAS ANY
CARCINOGENIC PROPERTY"
Effects of Overexposure:EYE: IRRITATION W/REDNESS & SWELLING.
SKIN:PROLONGED EXPOSURE MAY IRRITATE. INHALATION:MILD IRRITATION.
INGESTION:NO REPORTED EFFECTS FROM INGESTING SMALL QUANTITY. LARGE
AMOUNT MAY CAUSE GI TRACT IRR ITATION & DISCOMFORT.
Medical Cond Aggravated by Exposure:ANY PREEXISTING ALLERGY,
SENSITIVITY OR ORGANIC DYSFUNCTION.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH 15 MIN WITH AMPLE WATER. SKIN: GENTLY WIPE OFF,
FLUSH W/WATER. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN OR ART
RESP AS REQUIRED. INGESTION: NO FIRST AID SHOULD BE REQUIRED.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:212F,100C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:HAZARDOUS PHOSPHOROUS COMPOUNDS FORM.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE EQUIPMENT; USE
ABSORBENT MATERIAL TO COLLECT & CONTAIN FOR SALVAGE OR DISPOSAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:TRACES OF FORMALDEHYDE AND OTHER
DECOMP PRODUCTS MAY FORM IN AIR AT TEMP >150C. USE REASONABLE CARE
IN HANDLING.
Other Precautions:TRACES OF FORMALDEHYDE & OTHER THERMAL DECOMPOSITION
PRDS. MAY FORM @ TEMP. >302F/>150C. IN THE PRESENCE OF AIR. PROVIDE
ADEQUATE VENTILATION WHEN HANDLING @ ELEVATED TEMPERATURES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:OIL MIST/VAPOR RESPIRATORY IF TLV EXCEEDED;
NORMALLY NOT NEEDED.
Ventilation:GENERAL MECHANICAL.
Protective Gloves:AS REQUIRED FOR TASK AT HAND.
Eye Protection:SAFETY GLASSES, CHEMICAL GOGGLES.
Other Protective Equipment:ADDED PROTECTIVE IS REQUIRED FOR
AEROSOL/SPRAY OR ELEVATED TEMPERATURE APPLICATIONS.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE, BEFORE EATING OR
SMOKING.
Supplemental Safety and Health
QPL-46176 SHOWS P/N: X2-1143
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:NOT GIVEN
Vapor Pres:<5 MM
Spec Gravity:0.97
Viscosity:>1.3CS @ 212F
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PURPLE LIQUID,SLIGHT ODOR.
Percent Volatiles by Volume:<5.%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:NOT APPLICABLE PER THE MFR.
Hazardous Decomposition Products:OXIDES OF
PHOSPHOROUS,NITROGEN,SILICON,CARBON; PARTLY OXIDIZED CARBON
PRODUCTS.
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE.
==================== Disposal Considerations ====================
Waste Disposal Methods:REVIEW ALL LOCAL, STATE & FEDERAL REGULATIONS
CONCERNING HEALTH & POLLUTION TO DETERMINE APPROVED DISPOSAL
PROCEDURES. CONTACT DOW CORNING IF THERE ARE ANY DISPOSAL
QUESTIONS.; PRODUCT IS AN OIL IN CO NTEXT OF CLEAN WATER
ACT.',SPILL:NAT.RESPONS.CTR
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|