===================== Product Identification =====================
MSDS NAME:A60 OBNF TYPE 1 ABRASIVE CUT-OFF WHEELS
NIIN:01-102-9973
MSDS Number: BGLXP
=== Responsible Party ===
Company:SPEDETOOL MANUFACTURING,INC.
Address:12261 E. BARRINGER ST
Box:3222
City:SOUTH EL MONTE
State:CA
ZIP:91733
Info Phone Num:818-443-0193
Emergency Phone Num:818-443-0193
CAGE:MO922
=== Contractor Identification ===
Company:SPEDETOOL MANUFACTURING,INC.
Address:12261 E. BARRINGER ST
Box:3222
City:SOUTH EL MONTE
State:CA
ZIP:91733
Phone:818-443-0193
CAGE:MO922
Company:SPEDETOOL MFG CO INC
Address:10042 RANCHO RD
Box:40
City:ADELANTO
State:CA
ZIP:92301-0040
Country:US
CAGE:56268
============= Composition/Information on Ingredients =============
Name:LIQUID PHENOLIC RESIN
Fraction by Wt: 0.5%
Name:POWDER PHENOL-NOVOLAC
Fraction by Wt: 15%
Name:PHENOLIC RESIN COATED FIBERGLASS
Fraction by Wt: 3.7%
Name:ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS
FORMS) (SARA III)
CAS:1344-28-1
RTECS #:BD1200000
Fraction by Wt: 80%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:OVEREXPOSURE WILL CAUSE MILD SKIN
IRRITATION.
Effects of Overexposure:ITCHING OR IRRITATION TO SKIN OR EYES.
Medical Cond Aggravated by Exposure:NONE NOTED.
======================= First Aid Measures =======================
First Aid:FLUSH EYES WITH CLEAN WATER FOR 15 MINUTES AND WASH WITH SOAP
AND WATER. SEE DOCTOR IF IRRITATION PERSISTS.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER,CO*2.
Fire Fighting Procedures:NONE REQUIRED.
Unusual Fire/Explosion Hazard:NONE REQUIRED.
================== Accidental Release Measures ==================
Spill Release Procedures:IF MATERIAL IS DISPOSED OR HAS FALLEN,AVOID
USAGE. THIS CAN CAUSE MATERIAL TO HAVE UNKNOWN CRACKS. SCOOP UP AND
PLACE IN DISPOSAL CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN DRY,COOL LOCATION. DO NOT
STORE WHEEL AT TEMPERATURES EXCEEDING 120F,49C.
Other Precautions:SLIGHT-AMMONIA-LIKE ODOR WHEN GRINDING. USE MODERATE
VENTILATION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED DUST RESPIRATOR.
Ventilation:MECHANICAL (GENERAL) VENTILATION. IF WORKING IN CONFINED
AREAS,USE LOCAL EXHAUST.
Protective Gloves:LEATHER.
Eye Protection:FULL FACE SHIELD.
Other Protective Equipment:GUARDS ON GRINDING EQUIPMENT.
Work Hygienic Practices:USE MODERATE VENTILATION.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:N1
Solubility in Water:MODERATE
Appearance and Odor:MILK PHENOLIC RESIN,DUSTY ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE NOTED.
Stability Condition to Avoid:AVOID USAGE IN CLOSED OR CONFINED AREAS.
Hazardous Decomposition Products:AMMONIA.
==================== Disposal Considerations ====================
Waste Disposal Methods:SANITARY LANDFILL OR INCINERATE IAW
FEDERAL,STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|