===================== Product Identification =====================
MSDS NAME:MORPHOOLINE 91%
NIIN:00N009113
MSDS Number: BGXMF
=== Responsible Party ===
Company:SHAMROCK CHEMICAL & ENGINEERING CO. INC.
Address:17 HIGH POINT DRIVE
City:GULF BREEZE
State:FL
ZIP:32561
Info Phone Num:904-932-5646
Emergency Phone Num:904-932-5646
CAGE:64309
=== Contractor Identification ===
Company:SHAMROCK CHEMICAL AND ENGINEERING CO INC
Address:17 HIGHPOINT DR
Box:City:GULF BREEZE
State:FL
ZIP:32561-4013
Country:US
CAGE:64309
============= Composition/Information on Ingredients =============
Name:MORPHOLINE
CAS:110-91-8
RTECS #:QD6475000
Fraction by Wt: 91%
Other REC Limits:N/K
OSHA PEL:S,20 PPM/30 STEL
ACGIH TLV:S, 20 PPM; 9192
===================== Hazards Identification =====================
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF OVEREXPOSURE
.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES AND SKIN:EXTREMELY IRRITATING: MAY CAUSE
PERMANENT DAMAGE.INGESTION:MODERATELY TOXIC
INGESTION.INHALATION:MAY IRRITATE RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:N/K
======================= First Aid Measures =======================
Eyes:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.CONSULT
PHYSICIAN.SKIN:REMOVE CONTAMINATED CLOTHING.FLUSH SKIN WITH
WATER.SEE PHYSCIAN.INGESTION:GIVE LARGE QUANTITIES OF WATER.CONSULT
PHYSICIAN.DO NOT I NDUCE VOMITING.NEVER GIVE ANYTHING BY MOUTH TO
AN UNCONSCIOUS PERSON.INHALATION:REMOVE TO FRESH AIR.CONSULT
PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:110F,43C
Lower Limits:1.8%
Upper Limits:10.8%
Extinguishing Media:DRY CHEMICAL,FOAM OR CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA FULL PROTECTIVE
EQUIPMENT (FP N9.USE WATER TO COOL ADJACENT CONTAINERS.
Unusual Fire/Explosion Hazard:AMMONIA,CARBON MONOXIDE AND CARBON
DIOXIDE MAY BE FORMED BY THERMAL DECOMPOSITIN.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE IGNITION SORUCES,VENTILAGE AREA.WEAR
PROTECTIVE EQUIPMENT.REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED.STORE AWAY FROM
HEAT,FLAME OR OTHER IGNITION SOURCES.WEAR PROTECTIVE EQUIPMENT.
Other Precautions:FOR INDUSTRIAL USE ONLY.DO NOT TAKE INTERNALLY.AVOID
SKIN AND EYE CONTACT.AVOID BREATHING VAPORS.DO NOT WEAR CONTACT
LENSES AROUND THIS PRODUCT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:RUBBER OR IMPERVIOUS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:RUBBER BOOTS,PROTECTIVE CLOTHING AND SAFETY
SHOWER RECOMMENDED.
Work Hygienic Practices:N/K
Supplemental Safety and Health
PH:12.2 (100% MORPHOLINE)HAZARD SPECIFICATIONS:COMBUSTIBLE
LIQUID,IRRITANT,SKIN HAZARD.EYE HAZARD,TOXIC AGENT.
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:7 MMHG
Vapor Density:3.0 AIR=1
Spec Gravity:N/K
pH:SUP DA
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR LIQUID,AMMONIA ODOR.
Percent Volatiles by Volume:91%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:FLAMES,OR OTHER IGNITION SOURCES.
Hazardous Decomposition Products:AMMONIA,CARBON MONOXIDE AND CARBON
DIOXIDE MAY BE FORMED BY THERMAL DECOMPOSITION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REFGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|