===================== Product Identification =====================
MSDS NAME:TIN LEAD ANTIMONY ALLOY WW-300 CORE
NIIN:01-071-4279
MSDS Number: BGXKV
=== Responsible Party ===
Company:GARDINER SOLDER CO, DIV OF GARDINER METAL CO
Address:4820 S CAMPBELL AVE
City:CHICAGO
State:IL
ZIP:60632-1416
Country:US
Info Phone Num:800-424-9300
Emergency Phone Num:312-847-0100
Preparer's Name:TED VAN DER MOLEN
CAGE:56244
=== Contractor Identification ===
Company:GARDINER SOLDER CO, DIV OF GARDINER METAL CO
Address:4820 S CAMPBELL AVE
Box:City:CHICAGO
State:IL
ZIP:60632-1416
Country:US
Phone:312-847-0100/800-424-9300(CHEMTREC)
CAGE:56244
============= Composition/Information on Ingredients =============
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 5-94.3%
Other REC Limits:O.O3 MG/M3
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:ANTIMONY (SARA III)
CAS:7440-36-0
RTECS #:CC4025000
Fraction by Wt: 0.2-2.2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG SB/M3; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 5-94.3%
Other REC Limits:NONE SPECIFIED
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192
Name:ROSIN
CAS:8050-09-7
Fraction by Wt: 0.5-3%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.1MG/M3 FORMALDEHYD
ACGIH TLV:0.1MG/M3 FORMALDEHYD
Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0.08%MAX
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 0.02%MAX
OSHA PEL:10 MG/M3 TOTAL DUST
ACGIH TLV:5 MG FE/M3
Name:ZINC (SARA III)
CAS:7440-66-6
RTECS #:ZG8600000
Fraction by Wt: .005%MAX
OSHA PEL:10 MG ZNO/M3
ACGIH TLV:10 MG ZNO/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ALUMINUM
CAS:7429-90-5
RTECS #:BD0300000
Fraction by Wt: .005%MAX
OSHA PEL:15 MG/M3 TOTAL DUST
ACGIH TLV:10 MG AL/M3
Name:ARSENIC (SARA III)
CAS:7440-38-2
RTECS #:CG0525000
Fraction by Wt: 0.03%MAX
OSHA PEL:0.5 MG/M3 (AS)
ACGIH TLV:0.01,A1 MG/M3; 9394
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:ROSIN
CAS:8050-09-7
Fraction by Wt: 3.3%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-INHALATION OF FUMES(DURING
SOLDERING):IRRITATION OF EYES AND RESPIRATORY TRACT SYSTEM.
CHRONIC:LONG AND REPEATED EXPOSURE TO METAL FUMES MAY CAUSE
HEADACHE, NAUSEA/VOMITING, ACHING BONES, FATIGU E, DECREASED
APPETITE, ABDOMINAL CRAMPING, ANEMIA, BRAIN, HEART, LUNG, LIVER AND
KIDNEY DEGENERATIVE CHANGES.
Explanation of Carcinogenicity:FORMALDEHYDE IS LISTED AS A PROBABLE
CARCINOGEN BY NTP,IARC, EPA,& IT IS REGULATED BY OSHA.
Effects of Overexposure:EXPOSURE TO FUMES MAY RESULT IN IRRITATION OF
NOSE, THROAT, EYES AND SKIN. BURNS FROM SKIN CONTACT OF MOLTEN
SOLDER. WATERY EYES, HEADACHE, BREATHING DIFFICULTY, FREQUENT
COUGHING.
Medical Cond Aggravated by Exposure:SOME WORKERS WITH PRE-EXISTING
CONDITIONS OF LUNGS, EYES, SKIN, AND THOSE PREVIOUSLY EXPOSED TO
LEAD & ANTMONY MAY BE AT INCREASED RISK.
======================= First Aid Measures =======================
First Aid:SKIN BURNS:FLUSH WITH COLD WATER OR APPLY ICE. IN CASE OF
SEVERE BURNS GET MEDICAL HELP. EYE IRRITATION:FLUSH WITH WATER FOR
15 MINUTES. INHALATION:REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF
BREATHING IS DIFFICULT. IF NOT BREATHING, BEGIN ARTIFICIAL
RESPIRATION. GET MEDICAL HELP. INGESTION:GET MEDICAL HELP.
===================== Fire Fighting Measures =====================
Extinguishing Media:DRY CHEMICAL. DO NOT USE WATER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN UP ANY DUST OR WASTE RESIDUES AND PLACE
IN SUITABLE DOT APPROVED CONTAINERS AND DISPOSE OF IN FULL
COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. AVOID
INHALATION AND SKIN EXPOSURE.
Neutralizing Agent:NONE
====================== Handling and Storage ======================
Handling and Storage Precautions:NO SPECIAL REQUIREMENTS FOR STORAGE.
WEAR GLOVES AND FLAME RETARDANT CLOTHING WHEN SOLDERING.
Other Precautions:FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF
CHILDREN. DO NOT TAKE INTERNALLY.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE FUME/ORGANIC VAPOR RESPIRATOR OR AIR
SUPPLIED RESPIRATOR WHEN SOLDERING IN A CONFINED SPACE OR WHERE
LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE BELOW
RECOMMENDED LIMITS. USE ONLY NIOSH APPROVED RESPIRATORS.
Ventilation:USE ENOUGH VENTILATION WHEN SOLDERING TO KEEP THE DUST,
FUMES & GASES BELOW TLV.
Protective Gloves:LEATHER GLOVES
Eye Protection:OSHA APPROVED GOGGLES/FACE SHIELD
Other Protective Equipment:FLAME RETARDANT CLOTHING AND LEATHER GLOVES
WHEN SOLDERING.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
COMPONENTS ARE TAKEN FROM SPEC. SPEC SPECIFIES ALLOY COMPOSITION AND
SEPARATELY THE FLUX PERCENTAGE. THUS % FIGURES DO NOT ADD TO 100.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:2516F,1380C
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Vapor Pres:1 AT 1626F
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GREY SOLID, ODORLESS
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS. STRONG ACIDS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:TOXIC METAL FUMES ABOVE 886C(1627F).
FROM THE ROSIN CORE; FORMALDEHYDE, CARBON MONOXIDE & DIOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|