=====================  Product Identification  =====================

MSDS NAME:EA 9330 PART B
NIIN:01-089-9073
Kit Part:Y
MSDS Number: BGXKW
=== Responsible Party ===
Company:DEXTER HYSOL AEROSPACE & INDUSTRIAL,DIV,DETER COR
Address:2850 WILLOW PASS RD.
Box:312
City:PITTSBURG
State:CA
Country:94
Info Phone Num:415-678-4201
Emergency Phone Num:415-678-4201
CAGE:33564
=== Contractor Identification ===
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564

=============  Composition/Information on Ingredients  =============

Name:EPOXY RESIN SYSTEM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:PART B IS CORROSIVE TO BODY TISSUES.
    IT MAY ALSO SENSITIZE SOME INDIVIDUALS PRODUCING ALLERGIC REACTIONS
    AT VERY LOW EXPOSURE LEVELS. VAPORS ARE EXTREMELY IRRITATING
    CAUSING RESPIRATORY DISCOMFORT.
Effects of Overexposure:EYE:BURNS MAY CAUSE PERMINENT DAMAGE.
    SKIN:IRRITATING,BURNS. INHALED:RESPIRATORY DISCOMFORT. INGESTED:G/I
    DISTRESS.
Medical Cond Aggravated by Exposure:ALLERGIC SENSITIVITY TO EPOXY
    RESINS.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH WITH WATER 15 MIN. SKIN:WASH WITH SOAP & WATER.
    INHALED:REMOVE TO FRESH AIR. GIVE ARTIFICAL RESPIRATION OR OXYGEN
    AS NEEDED. INGESTED:DO NOT INDUCE VOMITING. GIVE LARGE QUANTITY OF
    MILK OR W ATER.(NOTHING BY MOUTH IF UNCONSCIOUS.)GET IMMEDIATE
    MEDICAL ATTENTION. IF ANY IRRITATION PERSISTS OR IS SEVERE,GET
    PROMPT MEDICAL CARE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:>300F/149C
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM,WATER FOG,HALON
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS. IN
    CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASSES MAY BE
    LIBERATED UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE UP PLACE IN METAL CONTAINER. WIPE UP
    REMAINDER WITH SOLVENTS.
Neutralizing Agent:SOLVENT :ALCOHOL

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL,DRY,WELL VENTILATED
    AREA. STORE MAX OF 12 MO. AT 70F21CMAX.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE EXPECTED TO BE NECESSARY.
Ventilation:NORMAL ROOM VENTILATION. MFR RECOMMENDEES SUPPLEMENTARY
    LOCAL EXHAUST
Protective Gloves:RUBBER,PLASTIC,OTHER IMPERVIOUS
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES
Other Protective Equipment:CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE. AVOID
    UNNECESSARY CONTACT. REMOVE AND LAUNDER CONTAMINATED CLOTHING
    BEFORE REUSE.
Supplemental Safety and Health
PART B OF A 2 PART KIT. FOR A SEE P/N IND THIS NSN. MSDS NO. AB9163 OR
    1735BA3.

==================  Physical/Chemical Properties  ==================

HCC:B2
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01 MM
Spec Gravity:>1
Solubility in Water:N/L
Appearance and Odor:REDDISH-ORANGE LIQUID,AMMONIACAL ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS,MINERAL ACIDS.
Hazardous Decomposition Products:CARBON OXIDES,NITROGEN
    OXIDES,ALDEHYDES,ACIDS,ORGANICS
Conditions to Avoid Polymerization:AVOID MIXING IN QUANTITIES OVER I
    LB. DO NOT HEAT ABOVE 75F/24C UNTIL IN PLACE FOR FINAL CURE. HEAT
    YIELDS TOXIC GAS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***