=====================  Product Identification  =====================

MSDS NAME:BRUSHING TOPCOAT CONVERTER H3002
NIIN:00N010693
MSDS Number: BHVHK
=== Responsible Party ===
Company:US PAINT (GROW GROUP)
Address:831 S 21ST STREET
City:ST.LOUIS
State:MO
ZIP:63103
Info Phone Num:314-621-0525
Emergency Phone Num:314-621-0525,CHEMTREC 800-424-9300
CAGE:HO575
=== Contractor Identification ===
Company:US PAINT (GROW GROUP,INC)
Address:831 S,21ST STREET
Box:City:ST LOUIS
State:MO
ZIP:63103
Phone:(314)621-0525
CAGE:HO575
Company:US PAINT CORPORATION
Address:831 SOUTH 21ST STREET
Box:City:ST LOUIS
State:MO
ZIP:63103-3092
Country:US
Phone:314-621-0525
CAGE:90608

=============  Composition/Information on Ingredients  =============

Name:1,6-DIISOCYANATOHEXANE  (HEXAMETHYLENE DIISOCYANATE)
CAS:822-06-0
RTECS #:MO1740000
Fraction by Wt: 75%
Other REC Limits:N/K 
ACGIH TLV:0.005 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:ETHYL 3-ETHOXYPROPIONATE.VAPOR PRESSURE: 1 MMHG.
CAS:763-69-9
RTECS #:UF3325000
Fraction by Wt: 19%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:VOLATILE ORGANIC CONCENTRATION: 276 GMS/L.
RTECS #:9999999VO
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:RPTD/PRLNG BRTHING OF SPRAY
    MIST,SANDING DUST MAY CAUSE LUNG DISEASES.ALLERGIC SKIN OR RESP RXN
    MAY OCCUR.RESP SENSITIVITY RESULTS IN ASTHMA-LIKE SYMP ON
    SUBSEQUENT EXPOS EVEN 120F.DO NOT TRANSFER TO
    BOTTLES,OTHER UNLABELED CONTAINERS.
Other Precautions:CONTAINERS HAZ WHEN EMPTY-CONTAIN RESIDUES.OBSERVE
    ALL PREC.PROD MAY BE BLENDED W/ OTHER PROD PRIOR TO USE-OBSERVE ALL
    PREC ON ALL MATLS.FOR INDUS USE ONLY BY TRAINED PERS USING PROPER
    EQUIP.NOT TO SA LE TO OR USE BY GENERAL PUBLIC.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
    CONCENTRATION BELOW TLV .
Protective Gloves:SOLVENT IMPERMEABLE
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SOLVENT IMPERMEABLE CLOTHING & BOOTS.DO NOT
    GET IN EYES,ON SKIN OR CLOTHING.
Work Hygienic Practices:N/K 
Supplemental Safety and Health
HLTH HAZ:BRAIN & NERVOUS SYS DAMAGE.OVEREXPOSURE MAY RESULT IN
    DERMATITIS,ASPHYXIATION.CONCENTRATING & INHALING CONTENT MAY BE
    HARMFUL/FATAL.SPILL PROC:INERT MATERIAL (SAND,CLAY,EARTH,FLOOR
    ABSORB) &  SHOVEL INTO CONTR W/ NON-SPARKING TOOLS.PREVENT RUN-OFF
    TO SEWERS,STREAMS,BODIES OF WATER.NOTIFY ATHRTY IF THIS OCCURS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:329-382F
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:>1 (AIR=1)
Spec Gravity:1.08 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K 
Appearance and Odor:N/K 
Percent Volatiles by Volume:29

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS,WATER,ALCOHOLS,AMINES,STRONG BASES,METAL
    COMPOUNDS,SURFACE ACTIVE MATERIALS.
Stability Condition to Avoid:EXCESS HEAT
Hazardous Decomposition Products:MAY DECOMPOSE INTO FUMES CONTAINING
    CARBON MONOXIDE,CARBON DIOXIDE.OXIDES OF NITROGEN ARE EMITTED UPON
    DECOMPOSITION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/ FEDERAL,STATE
    & LOCAL REGULATIONS .ALLOW VOLATILES TO EVAP IN HOOD,ALLOW TIME FOR
    VAP TO CLEAR DUCTS.DISPOSE OF ABSORB,CONTAINER,UNUSED CONTENTS PER
    REGULATIONS .DO NOT INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***