RESTRICTED USE PESTICIDE
Toxic to fish and aquatic organisms
For retail sale to and use only by certified applicators or persons under their direct supervision, and only for
those uses covered by the certified applicator's certification.
Section 24(C)
REGISTRATION FOR SPECIAL LOCAL NEED
FOR DISTRIBUTION AND USE ONLY IN LOUISIANA
EPA SLN NO: LA05-0003
EXPIRATION: 04-18-2010
EPA Reg. No. 279-3126
For Agricultural or Commercial Use Only
EMERGENCY CALLS: 800-331-3148
IT IS A VIOLATION OF FEDERAL LAW TO USE THIS PRODUCT IN A MANNER
INCONSISTENT WITH ITS LABELING
CROP PEST RATE OF APPLICATION
Aids In Control Of 4.3 OZ/A
RICE
Rice Water Weevil (Larva) (0.05 LB AI/A)
DIRECTIONS FOR USE:
Mustang Insecticide may be impregnated on dry bulk fertilizers to aid in the control of rice water weevil larva. Fertilizers should be
impregnated (see directions below) with Mustang Insecticide only by properly equipped commercial chemical or fertilizer dealerships whose
primary business is rice. Apply a minimum of 150 pounds of dry bulk fertilizer impregnated with 4.3 ounces of Mustang Insecticide per acre.
Application should be made from one day after permanent flooding, but no less than 14 days prior to harvest. Larval counts using coring
techniques should be used to determine when applications might be necessary. The first larval count should be taken after permanent flood and
rice emergence. Treat when the average larval count per 4鈥? x 3鈥? core sample is 5 larvae. Repeat sampling at 5-7 day intervals if treatment
threshold is not reached.
Refer to the Louisiana Cooperative Extension Pest Management Guidelines for additional information, on recommended sampling methods and
treatment thresholds.
Fertilizer Impregnation Directions:
Apply using a minimum of 150 pounds of dry bulk fertilizer per acre with the recommended amount of Mustang Insecticide per acre. To
impregnate dry fertilizer with Mustang Insecticide, follow these steps: 1) Prepare a solution using the rate of Mustang Insecticide per acre with
adequate amount of water to create the solution. 2) Impregnate the dry fertilizer with the Mustang Insecticide solution in a closed rotary drum-
type mixer, allowing sufficient time to ensure uniform coverage. 3) Place delivery nozzle(s) inside the mixer, positioning them to provide
uniform spray coverage of the tumbling fertilizer. Use the finished product as soon as possible after blending.
Note that the physical properties of fertilizers vary, particularly in liquid absorptive capacity. When absorption is sufficient, simple spraying the
fertilizer with a Mustang Insecticide solution provides a satisfactory dry mixture. If the absorptive capacity is inadequate, the use of a highly
absorptive powder is required to provide a dry, free-flowing mixture. Microcel E (Johns-Manville Products Corporation) is a recommended
absorbent powder. Generally less than 2% by weight of Microcel E is required. DO NOT impregnate Mustang Insecticide onto straight-coated
ammonium nitrate or straight limestone because these materials will not absorb the insecticide. Dry fertilizer blends containing mixtures of
ammonium nitrate or limestone may be impregnated with Mustang Insecticide. The amount of Mustang Insecticide actually required in the
preparation of individual fertilizer mixtures should be determined carefully for each production operation to ensure that the amount of pesticide
actually contained in the mixture represents the correct rate of use. Thoroughly clean blending and application equipment to remove all traces
of Mustang Insecticide impregnated fertilizer before using the equipment to mix or apply fertilizer to crops other than rice. It is the
responsibility of the individual and/or company selling the fertilizer/insecticide mixture to follow all state regulations relating to dry bulk
fertilizer blending labeling.
24(C) Registrant:
FMC Corporation
Agriculture Products Group
1735 Market Street Mustang and -FMC Trademarks
漏2005 FMC Corporation
Philadelphia, PA 19103
Mustang_24c_LA_Rice_04-18-2005
RESTRICTIONS:
Do not apply more than a total of 0.20 pound active ingredient (AI) of Mustang Insecticide (EPA Reg. No. 279-3126) per acre per season
including both impregnated fertilizer and foliar applications. If Mustang Max Insecticide (EPA Reg. No. 279-3249) is applied to the same acre
(foliar application) as a Mustang Insecticide application, no more than three applications of Mustang Max Insecticide at 0.025 pound AI per
acre per application can be applied for every single application of Mustang Insecticide at 0.05 pound AI/acre.
Do not make applications less than 7 days apart.
Do not release floodwater within 7 days of application.
Do not use treated rice field for the aquaculture of edible fish and crustacean.
Do not apply within 14 days of harvest.
THIS LABELING MUST BE IN THE POSSESSION OF THE USER AT THE TIME OF PESTICIDE APPLICATION
ALL APPLICABLE DIRECTIONS, RESTRICTIONS AND PRECAUTIONS ON THE EPA REGISTERED LABEL ARE TO BE FOLLOWED.
PERSONAL PROTECTIVE EQUIPMENT AND REENTRY INTERVALS ON THE BASIC LABEL MUST BE FOLLOWED.
Dealers Should Sell in Original Packages Only.
Conditions of Sale and Limitation of Warranty and Liability:
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this
product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded.
The Directions for Use of this product should be followed carefully. It is impossible to eliminate all risks inherently
associated with the use of this product. Crop injury, ineffectiveness, or other unintended consequences may result because of
such factors as manner of use or application, weather or crop conditions beyond the control of FMC or Seller. All such risks
shall be assumed by Buyer and User, and Buyer and User agree to hold FMC and Seller harmless for any claims relating to
such factors.
Seller warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated
on the Directions for Use when used in accordance with the directions under normal conditions of use. FMC MAKES NO
WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, NOR ANY OTHER
EXPRESS OR IMPLIED WARRANTIES WITH RESPECT TO THE SELECTION, PURCHASE, OR USE OF THIS
PRODUCT. Any warranties, express or implied, having been made are inapplicable if this product has been used contrary to
label instructions, or under abnormal conditions, or under conditions not reasonably foreseeable to (or beyond the control of)
seller or FMC, and buyer assumes the risk of any such use.
To the extent permitted by law FMC or seller shall not be liable for any incidental, consequential or special damages resulting from the
use or handling of this product. THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF
FMC AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON
BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM
THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR,
AT THE ELECTION OF FMC OR SELLER, THE REPLACEMENT OF THE PRODUCT.
This Conditions of Sale and Limitation of Warranty and Liability may not be amended by any oral or written agreement.
24(C) Registrant:
FMC Corporation
Agriculture Products Group
1735 Market Street Mustang and -FMC Trademarks
漏2005 FMC Corporation
Philadelphia, PA 19103
Mustang_24c_LA_Rice_04-18-2005
|