Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: euclidchemical_com---008_02_C.asp
Material Safety Data Sheet




CORR-BOND - 3-1/2 GALLON UNIT**
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006

This is a kit that contains the following components:

CORR-BOND PART A
CORR-BOND PART B
CORR-BOND PART C




1/19 008 02
Material Safety Data Sheet




CORR-BOND PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006




SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

Product Information
Trade name : CORR-BOND PART A
Product code : 008 02

Supplier : Euclid Canada
2835 Grande-All茅e
St-Hubert, QC J4T 2R4
Telephone : 1-800-667-0920
Emergency Phone: : (613) 996-6666


Product use : Coating

Preparation Information
Prepared by: : Sewnauth Raghunandan
Date: : 08/27/2006
Telephone : (416) 421-3300

SECTION 2 - HAZARDS IDENTIFICATION

Emergency Overview
Colorless. Liquid. No serious effects anticipated under normal conditions of use. Leave area to breathe fresh
air. Avoid further overexposure. If symptoms persist, get medical attention.

Acute Potential Health Effects/ Routes of Entry
Inhalation No serious effects anticipated under normal conditions of use.
:
Eyes Direct contact may cause mild irritation.
:
Ingestion May cause gastrointestinal irritation, nausea, and vomiting.
:
Skin May cause mild irritation.
:

Aggravated Medical Conditions
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.

Chronic Health Effects
Prolonged or repeated exposure to epoxy resin can cause irritation to skin, eyes, skin sensitization, temporary
eye injury. Certain epoxy resins are reported to be mutagenic in some laboratory tests. Fillers are encapsulated
and not expected to be released from product under normal conditions of use.

SECTION 3 : HAZARDOUS INGREDIENTS


Chemical Name CAS-No. Weight % Range



3/19 800000050121
008 02
Material Safety Data Sheet




CORR-BOND PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006

Bisphenol A Polyglycidyl Ether Resin 25068-38-6 40.0 - 70.0
The ingredients listed above are hazardous as defined in the controlled products regulation. (CPR).

SECTION 4 - FIRST AID MEASURES

Get immediate medical attention for any significant overexposure.

Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get
medical attention.
Eye contact : Flush with water for 15 minutes. If irritation persists, get medical attention.
Skin contact : Wash area of contact thoroughly with hand cleaner followed by soap and water. If
irritation, rash or other disorders develop, get medical attention immediately.
Ingestion : Get medical attention. Do not induce vomiting.

Notes to physician : Not applicable.


SECTION 5: FIRE / EXPLOSION HAZARDS

Flash point : Not available.
Method : Not applicable.
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Means of Extinction : This product is not expected to burn under normal conditions of use.
Hazardous combustion : Carbon monoxide and carbon dioxide can form.Smoke, fumes.
products
Protective equipment for : Use accepted fire fighting techniques. Wear full firefighting protective
firefighters clothing, including self-contained breathing apparatus (SCBA).
Fire and explosion conditions : This product not expected to ignite under normal conditions of use.


SECTION 6 - SPILLS / LEAKS / ACCIDENTAL RELEASE MEASURES

Transfer to appropriate container for disposal. Stop flow. Contain spill. Keep out of water courses. Absorb
spill in sand, earth or other suitable material. Transfer to appropriate container for disposal. Use appropriate
protective equipment. Avoid contact with material.

SECTION 7 - HANDLING AND STORAGE

Handle in compliance with common hygienic practices. Clean hands thoroughly after handling. Keep from
freezing. Do not use in confined or poorly ventilated areas. Prevent inhalation of vapor, ingestion, and contact
with skin eyes and clothing. Keep container closed when not in use. Precautions also apply to emptied
containers. Store in sealed containers in a dry, ventilated warehouse location above freezing.



4/19 800000050121
008 02
Material Safety Data Sheet




CORR-BOND PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection equipment
Respiratory protection : Not required under normal conditions of use.Wear appropriate, NIOSH/MSHA
approved respirator with combination particulate filter and vapor/gas
removing cartridge when the ventilation is not adequate or if it is necessary to
abrade or grind surfaces coated with this product.
Hand protection : Use suitable impervious rubber or vinyl gloves and protective apparel to
reduce exposure.
Eye protection : Wear appropriate eye protection.Wear chemical safety goggles and/or face
shield to prevent eye contact. Do not wear contact lenses. Do not touch eyes
with contaminated body parts or materials. Have eye washing facilities readily
available.
Skin and body protection : Prevent contact with shoes and clothing. Use rubber apron and overshoes.
Protective measures : Other equipment not normally required.Use professional judgment in the
selection, care, and use.
Engineering measures : Not required under normal conditions of use.Use local exhaust when the
general ventilation is inadequate.

Exposure Limits
No known components with exposure limits.



SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State : Liquid
Form : Liquid
Color : Colorless
Odor : Amine
pH : Not available.
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : > 212 掳 > 100 掳
F, C
Water solubility : Slightly soluble
Evaporation Rate: : Not available.
Specific Gravity : 1.1
% Volatile Weight : 41 %


5/19 800000050121
008 02
Material Safety Data Sheet




CORR-BOND PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 10 - REACTIVITY / STABILITY

Substances to avoid : Strong acids.Strong bases.
Stability : Stable
Hazardous polymerization : Will not occur.


SECTION 11 - TOXICOLOGICAL INFORMATION

No Data Available


SECTION 12 - ECOLOGICAL INFORMATION

No Data Available


SECTION 13 - WASTE DISPOSAL CONSIDERATIONS

Disposal Method : Dispose as hazardous waste according to all local, state, federal and provincial
regulations.


SECTION 14 - TRANSPORTATION / SHIPPING DATA

TDG / DOT Shipping Description:
NOT REGULATED


SECTION 15 - REGULATORY INFORMATION

North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.


Canadian Regulations:
WHMIS Classification : D2B

This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all of the information required by the CPR.

Other Regulations:
When appropriately mixed with the other part, product has a VOC less water and exempt solvent of:
7 g/l




6/19 800000050121
008 02
Material Safety Data Sheet




CORR-BOND PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 16 - OTHER INFORMATION

HMIS Rating :
Health 1 0 = Minimum
1 = Slight
Flammability 0
2 = Moderate
Reactivity 0
3 = Serious
PPE
4 = Severe

Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.

Prepared by: Sewnauth Raghunandan

Legend
ACGIH - American Conference of Governmental Hygienists OSHA - Occupational Safety and Health Administration
DOT - Department of Transportation PEL - Permissible Exposure Limit
DSL - Domestic Substance List RCRA - Resource Conservation and Recovery Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
NTP - National Toxicology Program WHMIS - Workplace Hazardous Materials Information System




7/19 800000050121
008 02
Material Safety Data Sheet




CORR-BOND PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006




SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

Product Information
Trade name : CORR-BOND PART B
Product code : 008 02

Supplier : Euclid Canada
2835 Grande-All茅e
St-Hubert, QC J4T 2R4
Telephone : 1-800-667-0920
Emergency Phone: : (613) 996-6666


Product use : Coating

Preparation Information
Prepared by: : Sewnauth Raghunandan
Date: : 08/27/2006
Telephone : (416) 421-3300

SECTION 2 - HAZARDS IDENTIFICATION

Emergency Overview
Colorless. Liquid. No serious effects anticipated under normal conditions of use. Leave area to breathe fresh
air. Avoid further overexposure. If symptoms persist, get medical attention.

Acute Potential Health Effects/ Routes of Entry
Inhalation No serious effects anticipated under normal conditions of use.
:
Eyes Direct contact may cause mild irritation.
:
Ingestion May cause gastrointestinal irritation, nausea, and vomiting.
:
Skin May cause mild irritation.
:

Aggravated Medical Conditions
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.

Chronic Health Effects
Fillers are encapsulated and not expected to be released from product under normal conditions of use.

SECTION 3 : HAZARDOUS INGREDIENTS

This is not a controlled product as defined in the Canadian Workplace Hazardous Materials Information System
(WHMIS).




9/19 800000050122
008 02
Material Safety Data Sheet




CORR-BOND PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 4 - FIRST AID MEASURES

Get immediate medical attention for any significant overexposure.

Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get
medical attention.
Eye contact : Flush with water for 15 minutes. If irritation persists, get medical attention.
Skin contact : Wash area of contact thoroughly with hand cleaner followed by soap and water. If
irritation, rash or other disorders develop, get medical attention immediately.
Ingestion : Get medical attention. Do not induce vomiting.

Notes to physician : Not applicable.


SECTION 5: FIRE / EXPLOSION HAZARDS

Flash point : > 200 掳 > 93 掳
F, C
Method : Pensky Martens closed cup
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Means of Extinction : This product is not expected to burn under normal conditions of use.
Hazardous combustion : Carbon monoxide and carbon dioxide can form.Smoke, fumes.
products
Protective equipment for : Use accepted fire fighting techniques. Wear full firefighting protective
firefighters clothing, including self-contained breathing apparatus (SCBA).
Fire and explosion conditions : This product not expected to ignite under normal conditions of use.


SECTION 6 - SPILLS / LEAKS / ACCIDENTAL RELEASE MEASURES

Transfer to appropriate container for disposal. Stop flow. Contain spill. Keep out of water courses. Absorb
spill in sand, earth or other suitable material. Transfer to appropriate container for disposal. Use appropriate
protective equipment. Avoid contact with material.

SECTION 7 - HANDLING AND STORAGE

Handle in compliance with common hygienic practices. Clean hands thoroughly after handling. Keep from
freezing. Do not use in confined or poorly ventilated areas. Prevent inhalation of vapor, ingestion, and contact
with skin eyes and clothing. Keep container closed when not in use. Precautions also apply to emptied
containers. Store in sealed containers in a dry, ventilated warehouse location above freezing.




10/19 800000050122
008 02
Material Safety Data Sheet




CORR-BOND PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection equipment
Respiratory protection : Not required under normal conditions of use.Wear appropriate, NIOSH/MSHA
approved respirator with combination particulate filter and vapor/gas
removing cartridge when the ventilation is not adequate or if it is necessary to
abrade or grind surfaces coated with this product.
Hand protection : Use suitable impervious rubber or vinyl gloves and protective apparel to
reduce exposure.
Eye protection : Wear appropriate eye protection.Wear chemical safety goggles and/or face
shield to prevent eye contact. Do not wear contact lenses. Do not touch eyes
with contaminated body parts or materials. Have eye washing facilities readily
available.
Skin and body protection : Prevent contact with shoes and clothing. Use rubber apron and overshoes.
Protective measures : Other equipment not normally required.Use professional judgment in the
selection, care, and use.
Engineering measures : Not required under normal conditions of use.Use local exhaust when the
general ventilation is inadequate.

Exposure Limits
No known components with exposure limits.



SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State : Liquid
Form : Liquid
Color : Colorless
Odor : Amine
pH : Not available.
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : > 212 掳 > 100 掳
F, C
Water solubility : Slightly soluble
Evaporation Rate: : Not available.
Specific Gravity : 1.1
% Volatile Weight : 78 %


11/19 800000050122
008 02
Material Safety Data Sheet




CORR-BOND PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 10 - REACTIVITY / STABILITY

Substances to avoid : Strong acids.Strong bases.
Stability : Stable
Hazardous polymerization : Will not occur.


SECTION 11 - TOXICOLOGICAL INFORMATION

No Data Available


SECTION 12 - ECOLOGICAL INFORMATION

No Data Available


SECTION 13 - WASTE DISPOSAL CONSIDERATIONS

Disposal Method : Dispose as hazardous waste according to all local, state, federal and provincial
regulations.


SECTION 14 - TRANSPORTATION / SHIPPING DATA

TDG / DOT Shipping Description:
NOT REGULATED


SECTION 15 - REGULATORY INFORMATION

North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.


Canadian Regulations:
Not Controlled

This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all of the information required by the CPR.

Other Regulations:
When appropriately mixed with the other part, product has a VOC less water and exempt solvent of:
7 g/l




12/19 800000050122
008 02
Material Safety Data Sheet




CORR-BOND PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 16 - OTHER INFORMATION

HMIS Rating :
Health 2 0 = Minimum
1 = Slight
Flammability 0
2 = Moderate
Reactivity 1
3 = Serious
PPE
4 = Severe

Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.

Prepared by: Sewnauth Raghunandan

Legend
ACGIH - American Conference of Governmental Hygienists OSHA - Occupational Safety and Health Administration
DOT - Department of Transportation PEL - Permissible Exposure Limit
DSL - Domestic Substance List RCRA - Resource Conservation and Recovery Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
NTP - National Toxicology Program WHMIS - Workplace Hazardous Materials Information System




13/19 800000050122
008 02
Material Safety Data Sheet




CORR-BOND PART C
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006




SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

Product Information
Trade name : CORR-BOND PART C
Product code : 008 02

Supplier : Euclid Canada
2835 Grande-All茅e
St-Hubert, QC J4T 2R4
Telephone : 1-800-667-0920
Emergency Phone: : (613) 996-6666


Preparation Information
Prepared by: : Sewnauth Raghunandan
Date: : 08/27/2006
Telephone : (416) 421-3300

SECTION 2 - HAZARDS IDENTIFICATION

Emergency Overview
Gray. Powder. Dust may irritate nose and throat. Dust irritating to the respiratory tract. Leave area to breathe
fresh air. Avoid further overexposure. If symptoms persist, get medical attention.

Acute Potential Health Effects/ Routes of Entry
Inhalation Dust may irritate nose and throat. Dust irritating to the respiratory tract.
:
Eyes Direct contact may cause severe irritation. May cause mechanical irritation or abrasion,
:
and possible chemical burns. May cause temporary injury.
Ingestion May cause irritation to the mouth, throat and stomach. May cause gastrointestinal
:
irritation, nausea, and vomiting.
Skin May cause severe irritation. May cause dryness, cracking, irritation, and chemical burns.
:
May produce cement dermatitis due to primary irritation from alkaline, hydroscopic and
abrasive properties.

Aggravated Medical Conditions
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.

Chronic Health Effects
Inhalation of crystalline silica (quartz) can cause cancer based on animal data, and IARC concludes sufficient
evidence in humans (Group 1). Prolonged and repeated overexposure to free crystalline silica dust above the
TLV level may cause scarring of the lungs with cough and shortness of breath. A delayed lung injury, silicosis
may result from breathing free silica.




15/19 800000050123
008 02
Material Safety Data Sheet




CORR-BOND PART C
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 3 : HAZARDOUS INGREDIENTS


Chemical Name CAS-No. Weight % Range
Crystalline Silica (Quartz)/ Silica Sand 14808-60-7 > 60.0
Portland cement 65997-15-1 15.0 - 40.0
The ingredients listed above are hazardous as defined in the controlled products regulation. (CPR).

SECTION 4 - FIRST AID MEASURES

Get immediate medical attention for any significant overexposure.

Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get
medical attention.
Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical
attention immediately.
Skin contact : Clean area of contact thoroughly using soap and water. If irritation, rash or other
disorders develop, get medical attention immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control
Center or Physician immediately.


SECTION 5: FIRE / EXPLOSION HAZARDS

Flash point : Not available.
Method : Not available.
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Means of Extinction : This product is not expected to burn under normal conditions of use.Use
that which is appropriate to the surroundings.
Hazardous combustion : Not available.
products
Protective equipment for : Not applicable. Product is not expected to burn.
firefighters
Fire and explosion conditions : This product not expected to ignite under normal conditions of use.


SECTION 6 - SPILLS / LEAKS / ACCIDENTAL RELEASE MEASURES

Use appropriate protective equipment. Avoid contact with material. Dampen material with water to control
dusting. Scoop up and transfer to appropriate container for disposal. Flush spill area with water.




16/19 800000050123
008 02
Material Safety Data Sheet




CORR-BOND PART C
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 7 - HANDLING AND STORAGE

Prevent inhalation of dust and contact with skin and eyes. Clean hands thoroughly after handling. Precautions
also apply to emptied containers. Personal protective equipment must be worn during maintenance or repair of
contaminated mixer, reactor, or other equipment. Store in sealed containers in a cool, dry, ventilated
warehouse location.

SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection equipment
Respiratory protection : Wear appropriate, properly fitted NIOSH/MSHA approved dust respirator
where airborne concentrations are expected to exceed exposure limits
indicated on the MSDS. Follow manufacturer's directions for respirator use.
Hand protection : Use suitable impervious rubber or vinyl gloves and protective apparel to
reduce exposure.
Eye protection : Wear appropriate eye protection.Wear chemical safety goggles and/or face
shield to prevent eye contact. Do not wear contact lenses. Do not touch eyes
with contaminated body parts or materials. Have eye washing facilities readily
available.
Skin and body protection : Prevent contact with shoes and clothing.
Protective measures : Use professional judgment in the selection, care, and use.Wear gloves, head
coverings and full body clothing as necessary to prevent skin irritation.
Washable or disposable clothing may be used. Do not take unwashed
clothing home. Work clothes should be washed separately from other clothing
and the washing machine rinsed thoroughly following use. Inform the
launderer of the proper procedures. Store work clothes and street clothes
separately to prevent contamination.
Engineering measures : Use only in well ventilated areas. Provide maximum ventilation in enclosed
areas.Use local exhaust when the general ventilation is inadequate.

Exposure Limits

Chemical Name CAS Number Regulation Limit Form
Crystalline Silica (Quartz)/ 14808-60-7 Ontario TWA: 0.10 mg/m3 Respirable fraction.
Silica Sand ACGIH TWA: 0.05 mg/m3 Respirable fraction.

Portland cement 65997-15-1 Ontario TWA: 10 mg/m3 Total dust.
ACGIH TWA: 10 mg/m3



SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State : Solid
Form : Powder



17/19 800000050123
008 02
Material Safety Data Sheet




CORR-BOND PART C
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006

Color : Gray
Odor : None
pH : Not available.
Vapour pressure : Not available.
Vapor density : Not available.
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : Not available.
Water solubility : Miscible
Evaporation Rate: : Not available.
Specific Gravity : 2.75
% Volatile Weight : 0%


SECTION 10 - REACTIVITY / STABILITY

Substances to avoid : Not Applicable.
Stability : Material is stable under normal storage, handling, and use.
Hazardous polymerization : Will not occur under normal conditions.


SECTION 11 - TOXICOLOGICAL INFORMATION

No Data Available


SECTION 12 - ECOLOGICAL INFORMATION

No Data Available


SECTION 13 - WASTE DISPOSAL CONSIDERATIONS

Disposal Method : Recycle or dispose of in compliance with local, provincial and federal regulations.Not
regulated under RCRA. Dispose of in compliance with state and local regulations. Do
not incinerate.


SECTION 14 - TRANSPORTATION / SHIPPING DATA

TDG / DOT Shipping Description:
NOT REGULATED




18/19 800000050123
008 02
Material Safety Data Sheet




CORR-BOND PART C
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006



SECTION 15 - REGULATORY INFORMATION

North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.


Canadian Regulations:
D2A, E
This is a "controlled product" under the Canadian Workplace Hazardous Materials Information System
(WHMIS).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all of the information required by the CPR.

Other Regulations:
Regulatory VOC (less water and : 0 g/l
exempt solvent)



SECTION 16 - OTHER INFORMATION

HMIS Rating :
Health 1 0 = Minimum
1 = Slight
Flammability 0
2 = Moderate
Reactivity 0
3 = Serious
PPE
4 = Severe

Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.

Prepared by: Sewnauth Raghunandan

Legend
ACGIH - American Conference of Governmental Hygienists OSHA - Occupational Safety and Health Administration
DOT - Department of Transportation PEL - Permissible Exposure Limit
DSL - Domestic Substance List RCRA - Resource Conservation and Recovery Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
NTP - National Toxicology Program WHMIS - Workplace Hazardous Materials Information System




19/19 800000050123
008 02

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
countertop_com---pearlesc.asp 13463-67-7
elrey_com---EL_REY_ALLEGRO.asp 1317-65-3 013463-67-7 14808-60-7 65997-15-1 1305-62-0
elrey_com---EL_REY_DPR_FINISH.asp 1317-65-3 013463-67-7 14808-60-7
elrey_com---EL_REY_FASTWALL.asp 65997-15-1 14808-60-7 1305-62-0 68131-74-8
elrey_com---EL_REY_FASTWALL_CONC.asp 65997-15-1 14808-60-7 1305-62-0 68131-74-8
elrey_com---EL_REY_FASTWALL_SANDED.asp 14808-60-7 65997-15-1 1305-62-0 68131-74-8
elrey_com---EL_REY_FIB_47_SANDED.asp 14808-60-7 65997-15-1 1305-62-0 68131-74-8
elrey_com---EL_REY_LASTIC_FINISH.asp 1317-65-3 14808-60-7 013463-67-7 50-00-0
elrey_com---EL_REY_LIQUID_COLOR.asp N/A
elrey_com---EL_REY_STUCCO_BC_PATCH.asp 14808-60-7 65997-15-1 1305-62-0 68131-74-8
elrey_com---ER_BLK_STUFF.asp N/A
elrey_com---ER_CROWN_SEALER.asp N/A
elrey_com---ER_ELLASTIC_COATING.asp 1317-65-3 013463-67-7 50-00-0
elrey_com---ER_FLEXIBLE_BASECOAT.asp 50-00-0 67762-90-7
elrey_com---ER_FOG_KOTE.asp 65997-15-1 1305-62-0
elrey_com---ER_INSUL-BOND_L.asp 1317-65-3 75-21-8
elrey_com---ER_PERMAFLEX_400.asp 50-00-0 75-21-8
elrey_com---ER_PERMA_FLEX_PRIMER.asp 13463-67-7 14807-96-6
elrey_com---ER_PERMA_FLEX_SURFACE_SEALER.asp 330-54-1 112-34-5
elrey_com---ER_PERMA_ULTRA_FINISH.asp 1317-65-3 14808-60-7 013463-67-7
elrey_com---ER_PREMIUM_STUCCO_FINISH.asp 14808-60-7 65997-15-1 1305-62-0
elrey_com---ER_PREMIUM_STUCCO_PATCH.asp 14808-60-7 65997-15-1 1305-62-0
elrey_com---ER_ROLL_ON_WB.asp 1317-65-3 13463-67-7 330-54-1 64742-65-0
elrey_com---ER_STUCCO_CLEANER.asp N/A
elrey_com---ER_SUPERIOR_ADD_200.asp 75-21-8
elrey_com---ER_SUPERIOR_BOND.asp 75-21-8
elrey_com---ER_WALLEASE_BC.asp 14808-60-7 65997-15-1 1305-62-0
euclidchemical_com---001M_01_C.asp N/A
euclidchemical_com---002G_01_U.asp N/A
euclidchemical_com---002L_01_U.asp N/A
euclidchemical_com---002M_01_C.asp N/A
euclidchemical_com---002P_01_U.asp N/A
euclidchemical_com---008S_20_C.asp 65997-15-1
euclidchemical_com---008_02_C.asp N/A
euclidchemical_com---008_02_U.asp N/A
euclidchemical_com---010A_99_C_FR.asp N/A
euclidchemical_com---010B_99_C.asp N/A
euclidchemical_com---010B_99_U.asp 7732-18-5 37293-74-6
euclidchemical_com---010C_27_C.asp N/A
euclidchemical_com---010C_27_U.asp N/A
euclidchemical_com---010C_55_C.asp N/A
euclidchemical_com---010C_55_U.asp N/A
euclidchemical_com---010F_05_C.asp N/A
euclidchemical_com---010H_27_C_FR.asp N/A
euclidchemical_com---010H_27_U.asp 7732-18-5 36290-04-7 8061-52-7 8061-51-6 31138-65-5 59-50-7
euclidchemical_com---010P_27_C.asp N/A
euclidchemical_com---010S_27_C_FR.asp N/A
euclidchemical_com---010W_99_C.asp N/A
euclidchemical_com---010_99_C.asp N/A
euclidchemical_com---011A_99_C.asp 68439-57-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC