Material Safety Data Sheet
MSDS ID NO.: 0146MAR019
Revision date: 09/12/2005
1. CHEMICAL PRODUCT AND COMPANY INFORMATION
Product name: Marathon High Performance Cold Mix Binder
Synonyms: High Performance Cold Mix Binder; HP-2; HP-4; KP-2; KP-4; KP-6; Performac鈩? HP-
4; Performac鈩? KP-4
Chemical Family: Asphalt
Formula: Mixture
Manufacturer:
Marathon Petroleum Company LLC
539 South Main Street
Findlay OH 45840
Other information: 419-421-3070
Emergency telephone number: 877-627-5463
2. COMPOSITION/INFORMATION ON INGREDIENTS
High Performance Cold Mix Binder is an asphalt mixed with varying proportions of kerosene, No. 2 fuel oil, residuum
extract, heavy paraffinic distillate solvent extract and fatty acid amines. Composition varies depending on source of
crude and specifications of final product. May contain minor amounts of sulfur, nitrogen and oxygen containing
compounds.
Product information
Name CAS Number Weight % ACGIH Exposure OSHA - Vacated Other:
Limits: PELs - Time
Weighted Ave
=0.5 mg/m3 TWA
Marathon High Performance Cold Mix Mixture 100
Binder
Component Information
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 1 of 12
Mix Binder
Name CAS Number Weight % ACGIH Exposure OSHA - Vacated Other:
Limits: PELs - Time
Weighted Ave
No. 2 Fuel Oil 64741-44-2 10-40
Kerosene 8008-20-6 0-10 = 200 mg/m鲁 TWA
application restricted
to conditions in which
there are negligible
aerosol exposures
skin - potential for
cutaneous absorption
(as total hydrocarbon
vapor)
Fatty Acid Amines Mixture 1-5
Sulfur Compounds Mixture 0-5
Extracts, Petroleum Heavy Paraffinic 64742-04-7 0-0.8
Distillate Solvent
Asphalt 8052-42-4 55-90 =0.5 mg/m鲁 TWA
(inhalable fraction, as
benzene-soluble
aerosol)
Hydrogen Sulfide 7783-06-4 0-0.5 = 10 ppm TWA = 10 ppm TWA
= 15 ppm STEL = 14 mg/m鲁 TWA
= 15 ppm STEL
= 21 mg/m鲁 STEL
Notes: The manufacturer has voluntarily elected to reflect exposure limits contained in
OSHA's 1989 air contaminants standard in its MSDS's, even though certain of those
exposure limits were vacated in 1992.
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 2 of 12
Mix Binder
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
BLENDED ASPHALT PRODUCTS ARE DARK BROWN TO BLACK, SOLID OR SEMI-SOLID LIQUIDS. ASPHALT IS
MOLTEN ABOVE 200 DEGREES F AND SKIN CONTACT WILL CAUSE THERMAL BURNS. WHEN HEATED THIS
MATERIAL MAY VENT TOXIC LEVELS OF HYDROGEN SULFIDE (H2S) VAPORS THAT ACCUMULATE IN THE
VAPOR SPACES OF STORAGE AND TRANSPORT COMPARTMENTS. H2S VAPORS CAN CAUSE EYE, SKIN, AND
RESPIRATORY TRACT IRRITATION AND ASPHYXIATION. AVOID SKIN CONTACT. LONG TERM SKIN
EXPOSURE TO COMPONENTS OF THIS PRODUCT HAS CAUSED CANCER IN LABORATORY ANIMALS. THIS
PRODUCT IS CONSIDERED TO BE A COMBUSTIBLE LIQUID PER THE OSHA HAZARD COMMUNICATION
STANDARD AND SHOULD BE KEPT AWAY FROM HEAT, FLAME AND SOURCES OF IGNITION.
OSHA WARNING LABEL:
WARNING.
HOT ASPHALT
COMBUSTIBLE LIQUID.
MAY PRODUCE SEVERE BURNS.
MAY VENT HARMFUL CONCENTRATIONS OF HYDROGEN SULFIDE (H2S) GAS WHICH CAN CAUSE
RESPIRATORY IRRITATION AND ASPHYXIATION.
LONG-TERM SKIN EXPOSURE TO COMPONENTS OF THIS PRODUCT HAS CAUSED CANCER IN LABORATORY
ANIMALS.
CONSUMER WARNING LABEL:
A CONSUMER WARNING LABEL IS NOT APPLICABLE FOR THIS PRODUCT.
Inhalation: Vapors and fumes can cause respiratory and nasal irritation. Significant
concentrations of hydrogen sulfide gas can be present in the vapor space of storage
tanks and bulk transport compartments (See Sections 7, 8 & 11).
Ingestion: Product would be expected to have a low order of acute toxicity.
Skin contact: Hot product causes severe burns. Frequent or prolonged contact with cold material
may cause irritation.
Eye contact: Hot product causes severe burns.
Carcinogenic Evaluation:
Product information
Name IARC NTP ACGIH - OSHA - Select
Carcinogens: Carcinogens: Carcinogens: Carcinogens:
Marathon High Performance Cold Mix NE
Binder
Mixture
Notes: The International Agency for Research on Cancer (IARC) has determined that there
is sufficient evidence for the carcinogenicity of extracts of steam-refined bitumens
(asphalts), air-refined bitumens and pooled mixtures of steam- and air-refined
bitumens in experimental animals. IARC has determined that there is inadequate
evidence that bitumens alone are carcinogenic to humans.
Component Information
Name IARC NTP ACGIH - OSHA - Select
Carcinogens: Carcinogens: Carcinogens: Carcinogens:
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 3 of 12
Mix Binder
Kerosene A3 - Animal Carcinogen
8008-20-6 (as total hydrocarbon
vapor)
Asphalt Supplement 7, 1987; A4 - Not Classifiable as a
8052-42-4 Monograph 35, 1985; Human Carcinogen (as
(extracts of steam and air benzene-soluble aerosol)
refined bitumens)
Notes: The International Agency for Research on Cancer (IARC) has determined that there
is sufficient evidence for the carcinogenicity of untreated vacuum distillates, acid-
treated oils, and aromatic oils, including extracts from solvent treatment of distillates
and the high boiling fraction of catalytically cracked oils in animals.
The International Agency for Research on Cancer (IARC) has determined that there
is inadequate evidence for the carcinogenicity of diesel fuel/fuel oil in humans. IARC
determined that there was limited evidence for the carcinogenicity of marine diesel
fuel in animals. Distillate (light) diesel fuels were not classifiable as to their
carcinogeniicty to humans (Group 3A)
4. FIRST AID MEASURES
Inhalation: If affected, move person to fresh air. If breathing is difficult, administer oxygen. If not
breathing or if no heartbeat, give artificial respiration or cardiopulmonary
resuscitation (CPR). Immediately call a physician. If symptoms or irritation occur with
any exposure, call a physician.
Skin contact: For contact with hot molten material, immerse or flush skin with cold water for at least
15 minutes. Call a physician. Do not attempt to remove solidified material since
removal may cause further tissue injury. Cold material over a burn should not be
removed except by a physician. Remove cold material (not associated with a burn)
with waterless handcleaner and then wash with soap and water. If symptoms or
irritation occur, call a physician.
Ingestion: Ingestion not likely. If large amounts are swallowed, immediately call a physician.
Eye contact: For contact with hot molten material, flush with large amounts of tepid water for at
least 15 minutes. Immediately call a physician.
For contact with vapors or dust, flush with large amounts of tepid water for at least 15
minutes. If symptoms or irritation occur, call a physician.
Notes to physician: Recommended practice is to not attempt to remove hot material associated with a
burn. Allow the solidified material to remain in place until cooled so it can naturally
fall off. Natural separation will occur in 48-72 hours. If removal is attempted, mineral
oil may be used to remove asphalt once it is cooled. For best results, work it into the
skin around the material and allow the material to "float" off.
Medical conditions aggravated by Preexisting skin, eye and respiratory disorders may be aggravated by exposure to
exposure: components of this product.
5. FIRE FIGHTING MEASURES
Suitable extinguishing media: For small fires, Class B fire extinguishing media such as
CO2, dry chemical, foam (AFFF/ATC) or water spray can be
used. For large fires, water spray, fog or foam (AFFT/ATC)
can be used. Fire fighting should be attempted only by those
who are adequately trained and equipped with proper
protective equipment.
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 4 of 12
Mix Binder
Specific hazards: This product has been determined to be a combustible liquid
per the OSHA Hazard Communication Standard and should
be handled accordingly. For additional fire related
information, see NFPA 30 or the North American Emergency
Response Guide 128.
Special protective equipment for firefighters: Avoid using straight water streams. Water spray and foam
(AFFF/ATC) must be applied carefully to avoid frothing and
from as far a distance as possible. Avoid excessive water
spray application. Keep run-off water out of sewers and
water sources.
Flash point: >100 F
Autoignition temperature: No data available.
Flammable limits in air - lower (%): 0.7
Flammable limits in air - upper (%): 5.0
NFPA rating: HMIS classification:
Health: 2 Health: 2
Flammability: 2 Flammability: 2
Reactivity: 1 Reactivity: 1
Other: - Special: *See Section 8 for guidance in selection of
personal protective equipment.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Keep public away. Isolate and evacuate area. Shut off source if safe to do so.
Advise authorities and National Response Center (800-424-8802) if substance has
entered a watercourse or sewer. Notify local health and pollution control agencies, if
appropriate. Contain liquid with sand or soil. Recover and return product to source.
7. HANDLING AND STORAGE
Handling:
Comply with all applicable EPA, OSHA, NFPA and consistent state and local requirements. Use appropriate grounding
and bonding practices. Store in properly closed containers that are appropriately labeled and in a cool well-ventilated
area. Do not expose to heat, open flames, strong oxidizers or other sources of ignition. Do not cut, drill, grind or weld on
empty containers since they may contain explosive residues.
Significant concentrations of hydrogen sulfide (H2S) gas can be generated and accumulate in storage tanks and bulk
transport compartments which may require additional precautions and procedures during loading/unloading. When
opening covers and outlet caps on storage tanks, use face shield and gloves to avoid possible injury from pressurized
product. Stay upwind and vent open hatches before unloading. Keep heating coils and flues in storage tanks, trucks and
kettles covered with product (8"). Do not overheat.
Avoid skin contact. Exercise good personal hygiene including removal of soiled clothing and prompt washing with soap
and water.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
Engineering measures: Local or general exhaust required in an enclosed area or when there is inadequate
ventilation.
Respiratory protection: Not required under normal conditions and adequate ventilation. When H2S vapors
exceed permissible limits, i.e., in confined spaces or bulk transport
loading/unloading, a positive-pressure atmosphere supplying respirator is
recommended. Self-contained breathing apparatus should be used for fire fighting.
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 5 of 12
Mix Binder
Skin and body protection: Insulated gloves when handling hot material.
Eye protection: Goggles and faceshield when handling hot material.
Hygiene measures: Rubberized suits or coats may be needed for some maintenance operations with hot
material.
9. PHYSICAL AND CHEMICAL PROPERTIES:
Appearance: Black-brown Solid Or Semi-solid
Physical state (Solid/Liquid/Gas): Liquid
Substance type (Pure/Mixture): Mixture
Color: Black-Brown
Odor: Tar
Molecular weight: Not determined.
pH: Neutral
Boiling point/range (5-95%): No data available.
Melting point/range: 60 F
Decomposition temperature: Not applicable.
Specific gravity: 0.9-1.05
Density: 7.5-8.7 lbs/gal
Bulk density: No data available.
Vapor density: No data available.
Vapor pressure: 1-10 mm Hg @ 100 F
Evaporation rate: No data available.
Solubility: Not determined
Solubility in other solvents: No data available.
Partition coefficient (n-octanol/water): No data available.
VOC content(%): No data available.
Viscosity: No data available.
10. STABILITY AND REACTIVITY
Stability: The material is stable at 70 F, 760 mm pressure.
Polymerization: Will not occur.
Hazardous decomposition products: Combustion produces toxic oxides of sulfur, carbon
monoxide, sulfur dioxide, hydrogen sulfide and
hydrocarbons.
Materials to avoid: Strong oxidizers such as nitrates, chlorates, peroxides.
Conditions to avoid: Excessive heat, sources of ignition, open flame.
11. TOXICOLOGICAL INFORMATION
Acute toxicity:
Product information
Name CAS Number Inhalation: Dermal: Oral:
Marathon High Performance Cold Mix Mixture No data available No data available No data available
Binder
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 6 of 12
Mix Binder
Some epidemiologic studies conducted on workers exposed to asphalt fume have shown no increased incidence of
cancer while other studies have reported a slightly increased incidence of lung, other respiratory tract or gastrointestinal
cancers. In those studies in which elevated cancer incidences were reported, concurrent or previous exposure to coal-tar
products have been documented. therefore, it cannot be concluded that cancer incidence is related to exposure to
asphalt fume.
Although early studies have some technical shortcomings, long term inhalation exposures to asphalt aerosols or fumes
did not produce evidence of carcinogenicity even though chronic inflammatory changes similar to those produced by
nonspecific respiratory irritants were observed. Inhalation of 150 mg/m3 asphalt fume (particulate + vapor) 6 hours/day, 5
days/week for 13 weeks, did not produce toxicity except for reduced body weight and irritation in nasal passages in
exposed rats.
Laboratory animals administered subcutaneous or intramuscular injections of asphalt preparations or repeated skin
applications of hot (212 F) undiluted asphalt have occasionally produced a low incidence of skin tumors at the site of
application. These findings are of questionable validity since repeated tissue trauma (and/or burns) at the application site
can induce tumors. Solvent dilutions of different types of asphalts have been tested in chronic skin painting studies. Some
of the studies have reported a low incidence of skin tumors. The use of diluents may enhance bioavailability or metabolic
activation of chemicals in the mixture in a fashion not representative of occupational exposure. Skin painting studies in
mice have been conducted using condensates from fumes generated at temperatures >450 F diluted in solvent. Asphalt
fume condensate preparations have produced skin tumors. Experimental conditions (temperature and dose) were grossly
exaggerated over that likely to occur in humans.
Extracts of whole asphalts tested in a modified Ames assay gave negative or slightly positive findings (mutagenicity index
<1.5). Fume condensates derived from heating asphalts to high temperatures (>450 F) were moderately active (MI 4-9).
Fumes generated from coal tar pitch were >1000 times more active. Asphalt fume samples collected under actual field
conditions did not show any significant mutagenic activity.
Summary of health effect data on asphalt components:
This product can contain a toxicologically significant concentration of hydrogen sulfide (H2S). Hydrogen sulfide gas (H2S)
is toxic by inhalation. Prolonged breathing of 50-100 ppm H2S vapors can produce eye and respiratory tract irritation.
Higher concentrations (250-600 ppm) for 15-30 minutes can produce headache, dizziness, nervousness, nausea and
pulmonary edema or bronchial pneumonia. Concentrations of >1000 ppm will cause immediate unconsciousness and
death through respiratory paralysis. Rats and mice exposed to 80 ppm H2S, 6 hrs/day, 5 days/week for 10 weeks, did not
produce any toxicity except for irritation of nasal passages. H2S did not affect reproduction and development (birth
defects or neurotoxicity) in rats exposed to concentrations of 75-80 ppm or 150 ppm H2S, respectively. Over the years a
number of acute cases of H2S poisonings have been reported. Complete and rapid recovery is the general rule.
However, if the exposure was sufficiently intense and sustained causing cerebral hypoxia (lack of oxygen to the brain),
neurologic effects such as amnesia, intention tremors or brain damage are possible.
This product may contain Kerosene at a level of >1.0%. This product may contain No. 2 fuel oil at a level of >1.0%.
Lifetime skin painting studies in animals with similar middle distillate fuel oils and gas oils have produced tumors following
prolonged and repeated skin contact. Some middle distillates and/or light gas oils, when tested at nonirritating dose
levels, did not show any significant carcinogenic activity indicating that this tumorigenic response may be related to
chronic irritation and not to dose. Repeated dermal application has produced severe irritation and systemic toxicity in
subacute toxicity studies. Some components of this product, i.e., paraffins and olefins, have been shown to produce a
species specific sex hormonal dependent kidney lesion in male rats from repeated oral or inhalation exposure.
Subsequent research has shown that the kidney damage develops via the formation of alpha-2u-globulin, a mechanism
unique to the male rat. Humans do not form alpha-2u-globulin, therefore, the kidney effects resulting from this
mechanism are not relevant in humans. Some components were found to be positive in a few mutagenicity tests while
negative in the majority of others. The exact relationship between these results and human health is not known. This
product may contain residuum extract (solvent deasphalted residual oil) at a level of >1.0%. Lifetime skin painting studies
in animals with petroleum residua and/or its major components have produced tumors in animals following prolonged and
repeated skin contact. Repeated dermal application has produced severe irritation and systemic toxicity in subacute
toxicity studies. Some components of petroleum residua streams were found to be positive in a few mutagenicity tests
while negative in the majority of others. The exact relationship between these results and human health is not known.
This product may contain a heavy distillate aromatic extract at a level of 0-0.8%. Lifetime skin painting studies with heavy
distillate aromatic extracts (HDAE) have produced tumors following prolonged and repeated skin contact. HDAE was
found to be positive in an Ames mutagenicity test. Repeated dermal application of HDAE (30 mg/kg/day for 13 weeks)
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 7 of 12
Mix Binder
resulted in anemia, liver degeneration and injury to bone marrow and lymphoid tissues. Treatment related mortality and
body weight reduction was observed at 500 mg/kg. Repeated dermal application (125 mg/kg/day) of HDAE to pregnant
rats during gestation produced maternal and fetal toxicity. Increased resorptions were observed at doses of 30 mg/kg/day
and above.
12. ECOLOGICAL INFORMATION
Ecotoxicity effects: If spilled, hot product and/or the coating action of the oil components could harm
plant life. This product does not concentrate or accumulate in the food chain. This
product is not expected to cause any acute or chronic toxicity to aquatic organisms
due to its extremely low water solubility.
13. DISPOSAL CONSIDERATIONS
Cleanup Considerations: This product as produced is not specifically listed as an EPA
RCRA hazardous waste according to federal regulations (40
CFR 261). However, when discarded or disposed of, it may
meet the criteria of an "characteristic" hazardous waste. This
material could become a hazardous waste if mixed or
contaminated with a hazardous waste or other substance(s).
It is the responsibility of the user to determine if disposal
material is hazardous according to federal, state and local
regulations.
14. TRANSPORT INFORMATION
49 CFR 172.101:
DOT:
Transport Information: This material when transported via US commerce would be regulated by DOT
Regulations.
Comments: For domestic shipments only, the Proper Shipping Name "Asphalt, Cut
Back" may be used.
Proper shipping name: Tars, Liquid
UN/Identification No: UN 1999
Hazard Class: 3
Packing group: II
DOT reportable quantity (lbs): Not applicable.
TDG (Canada):
Proper shipping name: Tars, Liquid
UN/Identification No: UN 1999
Hazard Class: 3
Packing group: II
Regulated substances: Not applicable.
15. REGULATORY INFORMATION
Federal Regulatory Information:
US TSCA Chemical Inventory Section 8(b): This product and/or its components are listed on the TSCA
Chemical Inventory.
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 8 of 12
Mix Binder
OSHA Hazard Communication Standard: This product has been evaluated and determined to be
hazardous as defined in OSHA's Hazard Communication
Standard.
EPA Superfund Amendment & Reauthorization Act (SARA):
SARA Section 302: This product contains the following component(s) that have been listed on EPA's
Extremely Hazardous Substance (EHS) List:
Name CERCLA/SARA - Section 302 Extremely Hazardous Substances and TPQs
No. 2 Fuel Oil NA
Kerosene NA
Fatty Acid Amines NA
Sulfur Compounds NA
Extracts, Petroleum Heavy Paraffinic NA
Distillate Solvent
Asphalt NA
Hydrogen Sulfide hydrogen sulfide
SARA Section 304: This product contains the following component(s) identified either as an EHS or a
CERCLA Hazardous substance which in case of a spill or release may be subject to
SARA reporting requirements:
Name CERCLA/SARA - Hazardous Substances and their Reportable Quantities
No. 2 Fuel Oil NA
Kerosene NA
Fatty Acid Amines NA
Sulfur Compounds NA
Extracts, Petroleum Heavy Paraffinic NA
Distillate Solvent
Asphalt NA
Hydrogen Sulfide = 100 lb final RQ
= 45.4 kg final RQ
SARA Section 311/312: The following EPA hazard categories apply to this product:
Acute Health Hazard
Chronic Health Hazard
Fire Hazard
SARA Section 313: This product contains the following component(s) that may be subject to reporting on
the Toxic Release Inventory (TRI) From R:
Name CERCLA/SARA 313 Emission reporting:
No. 2 Fuel Oil None
Kerosene None
Fatty Acid Amines None
Sulfur Compounds None
Extracts, Petroleum Heavy Paraffinic None
Distillate Solvent
Asphalt None
Hydrogen Sulfide None
State and Community Right-To-Know Regulations:
The following component(s) of this material are identified on the regulatory lists below:
No. 2 Fuel Oil
Louisiana Right-To-Know: Not Listed
California Proposition 65: Not Listed
New Jersey Right-To-Know: sn 2452
Pennsylvania Right-To-Know: Not Listed.
Massachusetts Right-To Know: Not Listed.
Florida substance List: Not Listed.
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 9 of 12
Mix Binder
Rhode Island Right-To-Know: Not Listed
Michigan critical materials register list: Not Listed.
Massachusetts Extraordinarily Hazardous Not Listed
Substances:
California - Regulated Carcinogens: Not Listed
Pennsylvania RTK - Special Hazardous Not Listed
Substances:
New Jersey - Special Hazardous Substances: Not Listed
New Jersey - Environmental Hazardous Not Listed
Substances List:
Illinois - Toxic Air Contaminants Not Listed
New York - Reporting of Releases Part 597 - Not Listed
List of Hazardous Substances:
Kerosene
Louisiana Right-To-Know: Not Listed
California Proposition 65: Not Listed
New Jersey Right-To-Know: sn 1091
Pennsylvania Right-To-Know: [present]
Massachusetts Right-To Know: Present
Florida substance List: Not Listed.
Rhode Island Right-To-Know: Flammable
Michigan critical materials register list: Not Listed.
Massachusetts Extraordinarily Hazardous Not Listed
Substances:
California - Regulated Carcinogens: Not Listed
Pennsylvania RTK - Special Hazardous Not Listed
Substances:
New Jersey - Special Hazardous Substances: Not Listed
New Jersey - Environmental Hazardous SN 1091
Substances List:
Illinois - Toxic Air Contaminants Not Listed
New York - Reporting of Releases Part 597 - Not Listed
List of Hazardous Substances:
Fatty Acid Amines
Louisiana Right-To-Know: Not Listed
California Proposition 65: Not Listed
New Jersey Right-To-Know: Not Listed.
Pennsylvania Right-To-Know: Not Listed.
Massachusetts Right-To Know: Not Listed.
Florida substance List: Not Listed.
Rhode Island Right-To-Know: Not Listed
Michigan critical materials register list: Not Listed.
Massachusetts Extraordinarily Hazardous Not Listed
Substances:
California - Regulated Carcinogens: Not Listed
Pennsylvania RTK - Special Hazardous Not Listed
Substances:
New Jersey - Special Hazardous Substances: Not Listed
New Jersey - Environmental Hazardous Not Listed
Substances List:
Illinois - Toxic Air Contaminants Not Listed
New York - Reporting of Releases Part 597 - Not Listed
List of Hazardous Substances:
Sulfur Compounds
Louisiana Right-To-Know: Not Listed
California Proposition 65: Not Listed
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 10 of 12
Mix Binder
New Jersey Right-To-Know: Not Listed.
Pennsylvania Right-To-Know: Not Listed.
Massachusetts Right-To Know: Not Listed.
Florida substance List: Not Listed.
Rhode Island Right-To-Know: Not Listed
Michigan critical materials register list: Not Listed.
Massachusetts Extraordinarily Hazardous Not Listed
Substances:
California - Regulated Carcinogens: Not Listed
Pennsylvania RTK - Special Hazardous Not Listed
Substances:
New Jersey - Special Hazardous Substances: Not Listed
New Jersey - Environmental Hazardous Not Listed
Substances List:
Illinois - Toxic Air Contaminants Not Listed
New York - Reporting of Releases Part 597 - Not Listed
List of Hazardous Substances:
Extracts, Petroleum Heavy Paraffinic Distillate Solvent
Louisiana Right-To-Know: Not Listed
California Proposition 65: Not Listed
New Jersey Right-To-Know: Not Listed.
Pennsylvania Right-To-Know: Not Listed.
Massachusetts Right-To Know: Carcinogen; Extraordinarily hazardous
Florida substance List: Not Listed.
Rhode Island Right-To-Know: Not Listed
Michigan critical materials register list: Not Listed.
Massachusetts Extraordinarily Hazardous carcinogen; extraordinarily hazardous
Substances:
California - Regulated Carcinogens: Not Listed
Pennsylvania RTK - Special Hazardous Not Listed
Substances:
New Jersey - Special Hazardous Substances: Not Listed
New Jersey - Environmental Hazardous Not Listed
Substances List:
Illinois - Toxic Air Contaminants Not Listed
New York - Reporting of Releases Part 597 - Not Listed
List of Hazardous Substances:
Asphalt
Louisiana Right-To-Know: Not Listed
California Proposition 65: Not Listed
New Jersey Right-To-Know: sn 0170
Pennsylvania Right-To-Know: [present]
Massachusetts Right-To Know: Present
Florida substance List: Not Listed.
Rhode Island Right-To-Know: Toxic, Flammable
Michigan critical materials register list: Not Listed.
Massachusetts Extraordinarily Hazardous Not Listed
Substances:
California - Regulated Carcinogens: Not Listed
Pennsylvania RTK - Special Hazardous Not Listed
Substances:
New Jersey - Special Hazardous Substances: Not Listed
New Jersey - Environmental Hazardous Not Listed
Substances List:
Illinois - Toxic Air Contaminants Not Listed
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 11 of 12
Mix Binder
New York - Reporting of Releases Part 597 - Not Listed
List of Hazardous Substances:
Hydrogen Sulfide
Louisiana Right-To-Know: Not Listed
California Proposition 65: Not Listed
New Jersey Right-To-Know: sn 1017
Pennsylvania Right-To-Know: environmental hazard
Massachusetts Right-To Know: Extraordinarily hazardous
Florida substance List: Not Listed.
Rhode Island Right-To-Know: Toxic, Flammable
Michigan critical materials register list: Not Listed.
Massachusetts Extraordinarily Hazardous extraordinarily hazardous
Substances:
California - Regulated Carcinogens: Not Listed
Pennsylvania RTK - Special Hazardous Not Listed
Substances:
New Jersey - Special Hazardous Substances: flammable - fourth degree
New Jersey - Environmental Hazardous SN 1017
Substances List:
Illinois - Toxic Air Contaminants Not Listed
New York - Reporting of Releases Part 597 - = 100 lbs Air RQ
List of Hazardous Substances: = 100 lbs Land/Water RQ
Canadian Regulatory Information:
Canada DSL/NDSL Inventory: This product and/or its components are listed either on the Domestic Substances List
(DSL) or the Non Domestic Substance List (NDSL).
Name Canada - WHMIS: Classifications of Substances: Canada - WHMIS: Ingredient Disclosure:
Kerosene B3; D2B
Hydrogen Sulfide A; B1; D1A; D2B 1% (English Item 851, French Item 1550)
16. OTHER INFORMATION
Additional Information: The pronounced and easily-recognized rotten egg odor of hydrogen sulfide gas
(H2S) can be detected at concentrations as low as 0.003-0.13 ppm. Since higher
H2S concentrations (100-200 ppm) cause olfactory fatigue and other hydrocarbon
odors can "mask" H2S, the sense of smell cannot be used as a reliable indicator of
H2S exposure.
Prepared by: Craig M. Parker Manager, Toxicology and Product Safety
The information and recommendations contained herein are based upon tests believed to be reliable. However,
Marathon Petroleum Company LLC (MPC) does not guarantee their accuracy or completeness nor shall any of this
information constitute a warranty, whether expressed or implied, as to the safety of the goods, the merchantability of the
goods, or the fitness of the goods for a particular purpose. Adjustment to conform to actual conditions of usage maybe
required. MPC assumes no responsibility for results obtained or for incidental or consequential damages, including lost
profits arising from the use of these data. No warranty against infringement of any patent, copyright or trademark is made
or implied.
End of Safety Data Sheet
MSDS ID NO.: 0146MAR019 Product name: Marathon High Performance Cold Page 12 of 12
Mix Binder
|