MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF SUBSTANCE/PREPARATION & COMPANY.
PRODUCT NAME: Kathon CG
PRODUCT CODE: 70747
SUPPLIER: The Soap Kitchen, Unit 2e Hatchmoor Ind/Est, Torrington, EX38 7HP
Emergency Tel No: 01805 622944 Emergency Contact: Mr. Richard Phillips.
2. COMPOSITION / INFORMATION ON INGREDIENTS.
DEFINITION/BOTANICAL ORIGIN: An isothiazolinone (mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and
2-methyl-2H-isothiazol-3-one) based cosmetic preservative
CAS No: 55965-84-9 Application: Preservative
INCI name: Aqua, Magnesium Chloride, Magnesium Nitrate, Methylchloroisothiazolinone,
Methylisothiazolinone
3. HAZARDS IDENTIFICATION:
C Corrosive; N Dangerous for the environment
4. FIRST-AID MEASURES:
INHALATION: Remove from exposure site to fresh air. Keep at rest. Obtain medical
attention.
EYE CONTACT: Rinse immediately with plenty of water for at least 15 mins. Contact a doctor if
symptoms persist.
SKIN CONTACT: Remove contaminated clothes. Wash thoroughly with soap & water,
flush with plenty of water. If irritation persists, seek medical advice.
Rinse mouth out with water. Seek medical advice immediately.
INGESTION:
OTHER: When assessing action take Risk & Safety Phrases into account
(Section 15)
5. FIRE FIGHTING MEASURES.
EXTINGUISHING MEDIA Use CO2, Dry Powder or Foam type Extinguishers, spraying
extinguishing media to base of flames. Do not use direct water jet on
RECOMMENDED:
burning material.
SPECIAL MEASURES: Avoid vapour inhalation. Keep away from sources of ignition. Do not
smoke. Wear positive pressure self-contained breathing apparatus &
protective clothing.
EXTINGUISHING PROCEDURES: Closed containers may build up pressure when exposed to heat and
should be cooled with water spray.
6. ACCIDENTAL RELEASE MEASURES.
PERSONAL PRECAUTIONS: Avoid inhalation & direct contact with skin & eyes. Use individual
protective equipment (safety glasses, waterproof-boots, suitable
protective clothing) in case of major spillages.
ENVIRONMENT PRECAUTIONS: Keep away from drains, soils, surface & groundwaters.
CLEANING UP METHODS Remove all potential ignition sources. Contain spilled material. Cover
with an inert or non-combustible inorganic absorbent material, sweep
up and remove to an approved disposal container. Observe state,
federal & local disposal regulations.
PDF created with pdfFactory trial version www.pdffactory.com
7. HANDLING & STORAGE.
PRECAUTIONS IN HANDLING: Apply good manufacturing practice & industrial hygiene practices,
ensuring proper ventilation. Observe good personal hygiene, do not
eat, drink or smoke whilst handling. Avoid static discharges.
STORAGE CONDITIONS: Store in tightly closed original container, in a cool, dry & ventilated area
away from heat sources & protected from light. Keep air contact to a
minimum.
FIRE PROTECTION: Keep away from ignition sources & naked flames. Take precautions to
avoid static discharges in working area.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION.
RESPIRATORY PROTECTION: Avoid breathing product vapour. Apply local ventilation where possible.
VENTILATION: Ensure good ventilation of working area.
SKIN PROTECTION: Avoid all skin contact. Use chemically resistant gloves if required.
EYE PROTECTION: Use safety glasses.
WORK/HYGIENE PRACTICES: Wash hands with soap & water after handling.
9. PHYSICAL & CHEMICAL PROPERTIES.
COLOUR: Light yellow
APPEARANCE: Mobile liquid
ODOUR: Odourless
FLASH POINT 掳C: >100
SPECIFIC GRAVITY AT 20 0C: 1.20 approx
1.5 - 3.0
PH UNDILUTED:
10. STABILITY & REACTIVITY.
REACTIVITY: It presents no significant reactivity hazards, by itself or in contact with
water. Avoid contact with strong acids, alkali or oxidising agents.
DECOMPOSITION: Liable to cause smoke & acrid fumes during combustion: carbon
monoxide, carbon dioxide & other non-identified organic compounds
may be formed.
11. TOXICOLOGICAL INFORMATION.
Data not available
12. ECOLOGICAL INFORMATION.
Harmful to aquatic organisms. May cause long-term adverse effects in the aquatic environment.
BIODEGRADABILITY: Biodegradable
PRECAUTIONS: Prevent surface contamination of soil, ground & surface water.
13. DISPOSAL CONSIDERATIONS.
Avoid disposing to drainage systems and into the environment. Seek expert advice.
14. TRANSPORT REGULATIONS.
UN 1760: applies
Road (ADR/RID): Class 8
Air (IATA): Class 8 packing Gp III
SEA (IMDG): Class 8 packing Gp III
CHIP: See section 15
PDF created with pdfFactory trial version www.pdffactory.com
15. REGULATORY INFORMATION.
HAZARDS: Corrosive
SYMBOLS: C
RISK PHRASES: R34 Causes burns
R43 May cause sensitisation by skin contact
R52/53 Harmful to aquatic organisms. May cause long-term adverse
effects in the aquatic environment
SAFETY PHRASES: S24 Avoid contact with skin
S26 In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice
S37/39 Wear suitable gloves and eye/face protection
S61Avoid release to the environment. Refer to special instructions /
safety data sheets
S45If In case of accident or if you feel unwell, seek medical advice
immediately
16. OTHER INFORMATION.
PACKAGING.
Type Suitability
Glass Yes
Lacquer lined steel/tin No
Aluminium Yes
HPPE Yes
F/HDPE Yes
Other plastic No
SHELF LIFE
When stored within advised conditions, 12 months minimum
Q.C. REQUIREMENTS.
In-line with general product specification. Always satisfy suitability for specific application.
The data provided in this material safety data sheet is meant to represent typical data/analysis for this
product and is correct to the best of our knowledge. The data was obtained from current and reliable
sources, but is supplied without warranty, expressed or implied, regarding its鈥? correctness or accuracy.
It is the user's responsibility to determine safe conditions for the use of this product, and to assume
liability for loss, injury, damage or expense arising from improper use of this product. The information
provided does not constitute a contract to supply to any specification, or for any given application, and
buyers should seek to verify their requirements and product use.
PDF created with pdfFactory trial version www.pdffactory.com
|