MATERIAL SAFETY DATA SHEET
Sikadur 31, Hi Mod Gel - Part A
HMIS
HEALTH 2
FLAMMABILITY 1
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 04/15/2003
Product Name: Sikadur 31, Hi Mod Gel - Part A
CAS Number: Not Established
Chemical Family: Modified Epoxy Resin
MSDS Number: 2665
Product Code: 0390130
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
AROMATIC HYDROCARBON BLEND Trade Secret
CALCIUM CARBONATE 471-34-1
MODIFIED EPOXY RESIN Trade Secret
NONYLPHENOL 25154-52-3
SILICA, QUARTZ 14808-60-7
Note: Exposure to silica, quartz is applicable only if cured with Part "B" and sanded.
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation. May cause skin sensitization.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikadur 31, Hi Mod Gel - Part A
3. Hazards Identification - Continued
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
May cause nose, throat, and lung irritation.
4. First Aid Measures
Eye
Rinse eyes thoroughly with water for at least 15 minutes. Consult physician.
Skin
In case of contact, immediately flush skin with plenty of water for at least 15 minutes.
Ingestion
Dilute with water. If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: >213 掳F >101 掳C
Fire And Explosion Hazards
None Known.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate personal protective equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Ventilate enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Store in a cool area. Keep containers tightly closed. Keep awat from ignition sources. Protect from heat and
direct sunlight.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation.
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure. Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Expsoure Limits are exceeded, use a
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikadur 31, Hi Mod Gel - Part A
8. Exposure Controls/Personal Protection - Continued
Respiratory Protection - Continued
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly after handling.
Ingredient(s) - Exposure Limits
CALCIUM CARBONATE
ACGIH TLV-TWA 10 mg/m3
OSHA PEL-TWA 15 mg/m3
OSHA PEL-TWA 5 mg/m3
SILICA, QUARTZ
ACGIH TLV-TWA 0.1 mg/m3 (Notice of Intended Change)
ACGIH TLV-TWA 0.05 mg/m3 (Proposed)
OSHA PEL-TWA 30/%SiO2+2 mg/m3
OSHA PEL-TWA 10/%SiO2+2 mg/m3
OSHA PEL-TWA 250/%SiO+5 mppcf
9. Physical And Chemical Properties
Appearance
Yellowish Liquid
Odor
Characteristic
Chemical Type: Mixture
Physical State: Liquid
Packing Density: 1.1 g/cm3
Solubility: Insoluble
Evaporation Rate: Slower than ether
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None known
Incompatible Materials
None when stored and handled according to prescribed instruction.
11. Toxicological Information
Eye Effects
Irritation
Skin Effects
Sensitization/allergic reaction possible.
Conditions Aggravated By Exposure
Eye disease, skin disorders and allergies, chronic respiratory disease
Ingredient(s) - Carginogenicity
SILICA, QUARTZ
NTP - Listed On The National Toxicology Program
Listed In The IARC Monographs
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikadur 31, Hi Mod Gel - Part A
12. Ecological Information
Do not allow to enter waste water drians, waterways, or soil.
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
State Regulations
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or
other reproductive harm.
Ingredient(s) - State Regulations
CALCIUM CARBONATE
Pennsylvania - Workplace Hazard
NONYLPHENOL
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
SILICA, QUARTZ
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
16. Other Information
HMIS Rating
H eal th: 2
F i re : 1
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
This MSDS Supercedes A Previous MSDS Dated: 04/15/2003
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikadur 31, Hi Mod Gel - Part A
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other materialor in any process. The information set forth herein is based on technical da
ta that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we make
no warranties, express or implied andassume no liability in connection with any use of this information. Nothing
herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|