|                                                                  Material Safety Data Sheetand Safe Handling and Disposal Information
 Section 1. Chemical Product and Company Identification
 ENFORCER Products,
 All Purpose Cleaner
 Product Name
 Inc.
 P.O. Box 1060
 Cartersville, GA 30120                                                        SLAP32,
 Product Code
 1-888-805-HELP                                                                SLAP128,
 SLAP5G
 Date of issue                             Supersedes 07/30/01
 02/06/04
 Emergency               For MSDS Information:
 Compliance Services (404) 352-1680
 telephone number
 
 For a Medical Emergency:
 INFOTRAC
 (877) 541-2016 (Toll Free - Calls Recorded)
 
 For a Transportation Emergency:
 CHEMTREC
 (800) 424-9300 (Toll Free - Calls Recorded)
 Compliance Services Group
 Prepared by
 Acuity Specialty Products Group
 1420 Seaboard Industrial Blvd.
 Atlanta, GA 30318
 
 Section 2. Composition, Information on Ingredients
 CAS #
 Name of Hazardous Ingredients                                                % by Weight             Exposure Limits
 OSHA's Hazard Communication Standard (29 CFR
 1910.1200) does not require the listing of any ingredient
 for this product.
 Section 3. Hazards Identification                                                                                    HMIS
 Health           1
 Routes of Entry Eye contact.
 Acute Effects
 Fire Hazard      0
 Prolonged or repeated contact may dry skin and cause irritation.
 Skin
 Hazardous in case of eye contact (irritant). Inflammation of the eye is characterized by redness, Reactivity       0
 Eyes
 Personal         B
 watering, and itching.
 Protection
 Inhalation Inhalation not likely under normal use conditions.
 Ingestion DO NOT swallow. Can cause gastrointestinal disturbances.
 Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
 Carcinogenic
 Effects
 Chronic Effects Repeated or prolonged exposure is not known to aggravate medical condition.
 See Toxicological Information (section 11)
 Section 4. First Aid Measures
 Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at
 Eye Contact
 least 15 minutes. Get medical attention.
 In case of contact, immediately flush skin with plenty of water. Get medical attention if irritation develops.
 Skin Contact
 If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
 Inhalation
 oxygen. Get medical attention.
 Ingestion           Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
 unconscious person. If large quantities of this material are swallowed, call a physician immediately.
 Section 5. Fire Fighting Measures
 0
 Not applicable.                    Flammable Limits Not applicable.
 Flash Point
 10
 Non-flammable.
 Flammability
 Fire Hazard       Not applicable.
 Use extinguishing media suitable for surrounding materials.
 Fire-Fighting Procedures
 
 
 
 
 Page: 1/3
 Product Name All Purpose Cleaner
 Material Safety Data Sheet
 Product Code SLAP32, SLAP128,
 SLAP5G
 
 Section 6. Accidental Release Measures
 Absorb with an inert material and place in an appropriate waste disposal container.
 Spill Clean up
 Section 7. Handling and Storage
 Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash thoroughly after handling. Do not
 Handling
 reuse product container.
 Keep container tightly closed. Keep container in a cool, well-ventilated area. Store between 40掳F - 120掳F (4.4掳C -
 Storage
 49掳C). Keep out of the reach of children.
 Section 8. Exposure Controls, Personal Protection
 Personal                                                                              Protective Clothing (Pictograms)
 Protection
 Safety glasses.
 Eyes
 No protective gloves are required under normal conditions of use.
 Body
 RespiratoryA respirator is not needed under normal and intended conditions of product use.
 Section 9. Physical and Chemical Properties
 Physical State Liquid.                                                                              Green.
 Color
 Pleasant.
 Odor
 10.0 - 11.0
 pH
 Not determined.
 Vapor Pressure
 100掳C (212掳F)
 Boiling Point
 Not determined.
 Vapor Density
 Specific Gravity 1 (Water = 1)
 1 compared to Water
 Evaporation Rate
 Easily soluble in cold water, hot water.
 Solubility
 Not applicable
 VOC (Consumer)
 Section 10. Stability and Reactivity
 The product is stable.
 Stability and Reactivity
 Reactive with OXIDIZING AGENTS.
 Incompatibility
 Hazardous Polymerization Will not occur.
 Carbon oxides (CO, CO2) and organic materials
 Hazardous Decomposition
 Products
 Section 11. Toxicological Information
 Not applicable.
 Toxicity to Animals
 Section 12. Ecological Information
 Not available.
 Ecotoxicity
 Biodegradable/OECD available.
 Not
 Section 13. Disposal Considerations
 Waste must be disposed of in accordance with federal, state and local environmental control
 Waste Information
 regulations.
 Non-regulated waste
 Waste Stream
 Consult your local or regional authorities.
 Section 14. Transport Information
 Not applicable.
 Proper shipping name
 DOT Classification        Not a DOT controlled material (United States).
 UN number                 Not regulated.
 Not a TDG controlled material.
 TDG Classification
 Section 15. Regulatory Information
 U.S. Federal Regulations SARA 313 toxic chemical notification and release reporting:
 No products were found.
 Clean Water Act (CWA) 311: No products were found.
 Clean air act (CAA) 112 regulated toxic substances: No products were found.
 
 California prop. 65: No products were found.
 State Regulations
 Not controlled under WHMIS (Canada).
 WHMIS (Canada)
 
 
 
 
 Page: 2/3
 Product Name All Purpose Cleaner
 Material Safety Data Sheet
 Product Code SLAP32, SLAP128,
 SLAP5G
 
 Section 16. Other Information
 To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
 liability whatsoever for the accuracy or completeness of the information contained herein.
 Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
 Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
 
 
 |