Material Safety Data Sheet
and Safe Handling and Disposal Information
Section 1. Chemical Product and Company Identification
ENFORCER Products,
Floor Sealer
Product Name
Inc.
P.O. Box 1060
Cartersville, GA 30120 SLSEAL128
Product Code
1-888-805-HELP Date of issue Supersedes 07/31/01
01/28/04
Emergency For MSDS Information:
Compliance Services (404) 352-1680
telephone number
For a Medical Emergency:
INFOTRAC
(877) 541-2016 (Toll Free - Calls Recorded)
For a Transportation Emergency:
CHEMTREC
(800) 424-9300 (Toll Free - Calls Recorded)
Compliance Services Group
Prepared by
Acuity Specialty Products Group
1420 Seaboard Industrial Blvd.
Atlanta, GA 30318
Section 2. Composition, Information on Ingredients
CAS #
Name of Hazardous Ingredients % by Weight Exposure Limits
DIETHYLENE GLYCOL MONOBUTYL ETHER; 112-34-5 1-5 Not established
2-(2-butoxyethoxy)-ethanol; butyl carbitol
DIETHYLENE GLYCOL MONOMETHYL ETHER; 111-77-3 1-5 Not established
2-(2-meth-oxy)-ethanol; methyl carbitol
Section 3. Hazards Identification HMIS
Health 1
Routes of Entry Dermal contact. Eye contact. Inhalation.
Acute Effects
Fire Hazard 0
Hazardous in case of skin contact (irritant). Prolonged or repeated contact may dry skin and
Skin
Reactivity 0
cause irritation.
Hazardous in case of eye contact (irritant). Inflammation of the eye is characterized by redness,
Eyes
Personal B
watering, and itching.
Protection
Inhalation Over-exposure by inhalation may cause respiratory irritation.
Ingestion May be harmful if swallowed. Can cause gastrointestinal disturbances.
Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
Carcinogenic
Effects
Chronic Effects The substance may be toxic to blood, kidneys, liver, testes. Repeated or prolonged
exposure to the substance can produce target organs damage.
See Toxicological Information (section 11)
Section 4. First Aid Measures
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes,
Eye Contact
keeping eyelids open. Get medical attention.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes.
Skin Contact
Wash clothing before reuse. Get medical attention if irritation develops.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
Inhalation
oxygen. Get medical attention.
Ingestion Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. Get medical attention immediately.
Section 5. Fire Fighting Measures
0
Not applicable. Flammable Limits Not applicable.
Flash Point
10
Non-flammable.
Flammability
Fire Hazard Not applicable.
Use an extinguishing agent suitable for surrounding fires.
Fire-Fighting Procedures
Page: 1/3
Product Name Floor Sealer
Material Safety Data Sheet
Product Code SLSEAL128
Section 6. Accidental Release Measures
Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste
Spill Clean up
disposal container.
Section 7. Handling and Storage
Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Use with adequate ventilation. Wash
Handling
thoroughly after handling.
Protect from freezing. Keep away from food, drink and animal feeding stuffs. Keep container tightly closed. Keep
Storage
container in a cool, well-ventilated area. Keep out of the reach of children.
Section 8. Exposure Controls, Personal Protection
Personal Protective Clothing (Pictograms)
Protection
Safety glasses.
Eyes
Repeated or prolonged exposure: gloves
Body
RespiratoryUse with adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Section 9. Physical and Chemical Properties
Physical State Liquid. Milky-white
Color
Faint Odor
Odor
8.0 - 9.0
pH
Not determined.
Vapor Pressure
100掳C (212掳F)
Boiling Point
<1 (Air = 1)
Vapor Density
Specific Gravity 1.02 (Water = 1)
<1 compared to Water
Evaporation Rate
Soluble in cold water, hot water.
Solubility
Not determined.
VOC (Consumer)
Section 10. Stability and Reactivity
The product is stable.
Stability and Reactivity
Reactive with OXIDIZING AGENTS, acids, alkalis.
Incompatibility
Hazardous Polymerization Will not occur.
Carbon Dioxide, Carbon Monoxide and unspecified organic materials.
Hazardous Decomposition
Products
Section 11. Toxicological Information
Toxicity to Animals Diethylene Glycol Monobutyl Ether:
ORAL (LD50): Acute: 5660 mg/kg [Rat].
DERMAL (LD50): Acute: 2700 mg/kg [Rabbit].
Diethylene Glycol Monomethyl Ether:
DERMAL (LD50): Acute: 650 mg/kg [Rabbit.].
Section 12. Ecological Information
Not available.
Ecotoxicity
Biodegradable/OECD available.
Not
Section 13. Disposal Considerations
Waste must be disposed of in accordance with federal, state and local environmental control
Waste Information
regulations.
Non-regulated waste
Waste Stream
Consult your local or regional authorities.
Section 14. Transport Information
Not applicable.
Proper shipping name
DOT Classification Not a DOT controlled material (United States).
UN number Not regulated.
Not a TDG controlled material.
TDG Classification
Section 15. Regulatory Information
U.S. Federal Regulations SARA 313 toxic chemical notification and release reporting:
Diethylene Glycol Monobutyl Ether
Diethylene Glycol Monomethyl Ether
Clean Water Act (CWA) 311: No products were found.
Clean air act (CAA) 112 regulated toxic substances: Diethylene Glycol Monobutyl Ether;
Diethylene Glycol Monomethyl Ether
California prop. 65: This product contains the following ingredients for which the State of
State Regulations
California has found to cause cancer, birth defects or other reproductive harm, which would
require a warning under the statute: Diethylene Glycol Monomethyl Ether
Class D-2B: Material causing other toxic effects (TOXIC).
WHMIS (Canada)
Page: 2/3
Product Name Floor Sealer
Material Safety Data Sheet
Product Code SLSEAL128
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|