Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
FD&C Blue #1
Last Revised: 5/09/06
eyes with large amounts of water, occasionally lifting the lower and upper
1. Product Identification
lids; continue for 15 minutes. If irritation develops, seek medical attention.
Product Name: FD&C Blue #1 Skin: No adverse effects. Wash with mild soap and water to remove
Synonyms: Color Additive nuisance color. Some dyes may temporarily stain skin.
CAS Number(s): 3844-45-9 Inhalation: This product is not classified as an irritant; however, dry
HMIS: powder may cause irritation in some individuals.
Health-0 Ingestion: If large quantities are ingested, consult your physician
Flammability-0
Reactivity-1
9. Fire Fighting Measures
2. Physical and Chemical Properties Extinguishing Media: Water, chemical foam or dry chemical
extinguisher
Solubility in Water: Not soluble in water Fire Fighting Procedures: Use self-contained breathing apparatus
% Volatile by Volume: None
Appearance & Odor: A dry colorant
10. Toxicological Information
3. Stability and Reactivity None of the ingredients of this material meet the definition of 鈥渉azardous
Chemical鈥?, 29 CFR 1910.1200
Chemical Stability: Under normal storage and handling conditions this
11. Disposal Considerations
is a stable material when kept in a closed container.
Incompatibility: None Sanitary landfill in accordance with local, state and federal regulations
Hazardous Decomposition: None
Hazardous Polymerization: Will not occur
4. Handling and Storage
Store tightly sealed at ambient temperatures.
5. Accidental Release Measures
If dry, shovel or vacuum or sweep color up for disposal. If wet, surfaces
exposed to a spill may become slippery or sticky. Spills should be thoroughly
flushed with soapy water until all apparent color is removed.
6. Exposure Controls & Personal Protection
Respiratory Protection: Respiratory protection is not required but
dusk masks are suggested.
Eye Protection: Eye protection is suggested for compliance with Good
Manufacturing Practices
Engineering Controls: This product can generate dust. Ventilation or
dust collection would be helpful, but not necessary
Other Protective Measures: None required. To minimize clean-up ,
wear when handling material
Work/Hygienic Practices: Some dyes may temporarily stain skin.
Use good personal hygiene practices; limit exposure to product whenever
possible to minimize clean-up
7. Hazards Identification
General: None
8. First Aid Measures
Eyes: This product is not classified as an irritant. If exposed, wash the
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
|