Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
Honey Almond Fragrance
Last Revised: 5/10/06
1. Product Identification 9. Fire Fighting Measures
Product Name: Honey Almond Fragrance Flash Point: 180掳F
NFPA Hazard Classifications: Extinguishing Media: Foam, CO2, Dry Chemical
Flammibility-2 Fire and Explosion Hazards: Use standard procedures and preferred
Health-1 extinguishing media above.
Reactivity-0
10. Toxicological Information
2. Physical and Chemical Properties
The identity of the individual ingredients in this mixture is regarded to be
Specific Gravity: 25/25掳C: 1.053 a trade secret and is not disclosed herein. However, the following health
Solubility in Water: Not soluble hazards may exist based upon the presence of certain hazardous ingredients:
Vapor Density: >1 -Eye contact may cause irritation and damage to cornea
Appearance & Odor: Clear, pale to light yellow liquid, fragrance -Inhalation of vapors may cause irritation of the pulmonary tract.
composition Breathing High concentrations may have anesthetic effect.
-Skin contact may cause irritation. Repeated skin contact may cause
allergic dermatitis.
3. Stability and Reactivity
-Ingestion may cause gastrointestinal and kidney damage.
Chemical Stability: Stable 11. Disposal Considerations
Incompatibility: Strong oxidizing agents
Hazard Combustion Products: Carbon dioxide, carbon monoxide, Incineration or sanitary landfill in accordance with local, state and
smoke federal regulations.
4. Handling and Storage
Keep away from heat and flame. Keep container closed when not in use.
Use with adequate ventilation.
5. Accidental Release Measures
Absorb onto inert material.
6. Exposure Controls & Personal Protection
Respiratory Protection: None required provided adequate ventilation
is present.
Eye Protection: Safety goggles recommended
Protective Clothing: Chemical resistant gloves recommended
Engineering Controls: Normal room air circulation required
7. Hazards Identification
General: No data
8. First Aid Measures
Eyes: In the event of contact with the eyes, irrigate with water for at
least ten minutes; obtain medical advice if irritation persists.
Skin: Remove contaminated clothes. Wash affected area with water. If
irritation persists; obtain medical advice.
Ingestion: Do not induce vomiting. Administer water or milk and
contact a physician.
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
|