Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
Isopropyl Palmitate
Last Revised: 7/25/05
1. Product Identification 8. First Aid Measures
Product Name: Isopropyl Palmitate Eyes: Flush with running water for 15 minutes. Do not let victim rub
INCI Name: Fatty Acid Ester eyes. Get medical attention immediately.
Chem. N.: No data Skin: Wash with soap and water.
Ingredient(s) & CAS Number(s): 142-91-6 Inhalation: Immediately remove victim to fresh air. If victim has
Ingredient(s) & EINECS Number(s): No data stopped breathing give artificial respiration. Get medical attention.
Ingestion: Call a physician or poison control center promptly.
Physician鈥檚 Note: No data
2. Physical and Chemical Properties
Melting Point: 31掳C
9. Fire Fighting Measures
Boiling Point: 161掳C/2MMHG
Evaporation Rate: (Water=1) NIL Flash Point: 174掳C. (COC)
Specific Gravity: (H2O=1) 0.850-0.855 Auto-ignition Temp: Unknown
Solubility in Water: Insoluble Extinguishing Media: ABC Extinguisher, Carbon Dioxide, Foam,
pH Value: No data Water spray
Appearance & Odor: Colorless and essentially odorless emollient Fire Fighting Procedures: Water or foam may cause frothing when
ester applied to flammable liquids having flash points above 100掳C. The frothing
may be violent and could endanger the life of the firefighter particularly
3. Stability and Reactivity when solid streams are directed directly into the burning liquid.
Fire and Explosion Hazards: Hot organic chemical vapors or mists
Chemical Stability: Stable are susceptible to sudden spontaneous combustion when mixed with air.
Incompatibility: Keep away from heat and flames. Avoid contact with Ignition may occur at temperatures below those published in the literature as
oxidizing materials. 鈥渁uto-ignition temperatures鈥?. Ignition temperatures decrease with increasing
Hazardous Decomposition: None known vapor volume and vapor/air contact time and are influenced by pressure
Hazardous Polymerization: No changes.
Ignition may occur at typical elevated-temperature process conditions,
4. Handling and Storage especially in a process operating under vacuum if subjected to sudden escape
of vapors or mists to the atmosphere occurs. Any proposed use of this
Store in tightly closed original containers at temperatures between 13掳- product in elevated temperature processes should be thoroughly evaluated to
38掳C. To avoid contamination. Store bulk liquids at temperatures between assure that safe operating conditions are established and maintained.
45掳 and 90掳C; in stainless steel or aluminum vessels under dry, inert
atmosphere. 10. Toxicological Information
Acute Oral LD50: No data
5. Accidental Release Measures Dermal and Eye Irritation Test: No data
Carcinogenicity: No data
Contain spill. Transfer to secure containers. Where necessary, collect
Mutagenicity: No data
using absorbent media. Flush area with hot water and detergent.
11. Disposal Considerations
6. Exposure Controls & Personal Protection
Follow federal, state and local regulations with regard to the disposal of
Respiratory Protection: None required
non-hazardous organic material.
Eye Protection: Safety glasses
Protective Clothing: None required
Engineering Controls: None
Other Protective Measures: Follow normal hygienic practices
7. Hazards Identification
General: None known
Inhalation: None known
Eye Contact: None known
Skin Contact: None known
Ingestion: None Known
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
|