Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

72623-86-0
72623-84-8

File Name: 157746_motorcraft_mercon_v_atf.asp
157746                                                                                 Page 1 of 6




MATERIAL SAFETY DATA SHEET
Ford Internal Reference Number(Tox No. : 157746)

Print Date : 07/26/02

Language: English


Part Type and Number Part name
--------------------------------------- --------------------------------------
Motorcraft - U.S. XT-5-QM MOTORCRAFT MERCON V ATF (OUART)
Motorcraft - U.S. XT-5-GM MOTORCRAFT MERCON V ATF (1 GALLON)
Motorcraft - U.S. XT-5-DM MOTOR MERCON V ATF (55 GALLON DRUM)

This material has not been identified against a material Specification.

====================== CHEMICAL AND PHYSICAL PROPERTIES =======================

Appearance : Physical State LIQUID
Form -
Color DARK RED
Specific Gravity (Relative Density) 0.8526
Boiling Point Not Determined
Flash Point >+180 掳C (>+356 F) (CLEVELAND OPEN
CUP)
pH full strength -
pH diluted -
Odor SLIGHT PETROLEUM
Odor Threshold Not Determined
Viscosity 36.7 CST at 40C
Vapor Density Not Determined
Vapor Pressure -
Evaporation Rate -
Freezing Point -
Explosion Properties : UEL Not Determined
LEL Not Determined %
Auto-ignition Temperature >+200 掳C
Solubility INSOLUBLE in Water
Partition Coefficient -

================== HAZARDOUS AND OTHER DISCLOSED INGREDIENTS ==================

Percent Exposure Limits - TWA
Range ACGIH/OSHA(where est.) CAS number Chemical Name
------------ ---------------------- ------------ --------------------------
>30-60 5/5 72623-86-0 LUBRICATING OILS
Ford= 1.0 mg/m3 (PETROLEUM) C15-30
HYDROTREATED, NEUTRAL
OIL BASED
>10-30 5/5 72623-84-8 LUBRICATING OILS


http://www.mats.for.../aft_msds_generation.cgi?language=US&tox=157746&type=hak&context=N 7/26/02
157746 Page 2 of 6

Ford= 1.0 mg/m3 (PETROLEUM), C15-30,
HYDROTREATED NEUTRAL
OIL-BASED, CONTAINING
SOLVENT DEASPHALTED
RESIDUAL OIL
>5-10 5/5 64742-46-7 PETROLEUM DISTILLATES,
Ford= 1.0 mg/m3 HYDROTREATED MIDDLE
>5-10 5/5 64742-52-5 PETROLEUM DISTILLATES,
Ford= 1.0 mg/m3 HYDROTREATED HEAVY
NAPHTHENIC
>5-10 5/5 64742-53-6 PETROLEUM DISTILLATES,
Ford= 1.0 mg/m3 HYDROTREATED LIGHT
NAPHTHENIC
>5-10 5/5 64742-54-7 PETROLEUM DISTILLATES
Ford= 1.0 mg/m3 HYDROTREATED HEAVY
PARAFFINIC
>5-10 5/5 64742-65-0 PETROLEUM DISTILLATES,
Ford= 1.0 mg/m3 SOLVENT DEWAXED HEAVY
PARAFFINIC
1-5 5/5 68477-31-6 PETROLEUM DISTILLATES,
Ford= 1.0 mg/m3 CATALYTIC, REFORMER
FRACTIONATOR RES.
0.1-<1 10(S15)/10(S15) ppm 91-20-3 NAPHTHALENE
<0.1 100(S125)/100(S125) 100-41-4 ETHYLBENZENE
ppm
<0.1 100(S150)/100(S150) 1330-20-7 XYLENE (ALL ISOMERS)
ppm
<.1 0.15(InorgDu&Fu)/ 7439-92-1 LEAD
0.05 mg/m3
<.1 .01-0.1(SeeTLV)/Same 7439-97-6 MERCURY
as TLV mg/m3(asHg)

Exposure Limit Abbreviations
--------------------------------------
TWA=Time Weighted Average C=Ceiling
S=Short Term Exposure Sk=Skin
Sol=Soluble Compounds Fu=Fumes
Insol=Insoluble Compounds Du=Dust I=IARC Resp=Respirable

=========================== REGULATORY INFORMATION ============================

This product contains trace levels (<0.1%) of a potential carcinogen.
If oil mist is generated, observe the OSHA exposure limit of 5 mg/m3. Ford
Motor Company recommends an exposure limit of 1.0 mg/m3.
This product contains a toxic chemical or chemicals subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372.
The information provided here is based on a Ford form 1291A completed by
the supplier.
California Proposition 65:
WARNING: This product contains a chemical known to the State of California
to cause cancer.
California Proposition 65:
WARNING: This product contains a chemical known to the State of California
to cause birth defects or other reproductive harm.

================================= SIGNAL WORD =================================


http://www.mats.for.../aft_msds_generation.cgi?language=US&tox=157746&type=hak&context=N 7/26/02
157746 Page 3 of 6




CAUTION




========================== HEALTH HAZARD INFORMATION ==========================

=(A)=============================== HAZARDS ===================================

This product is harmful if swallowed.
This product may be harmful by inhalation.
Exposure to oil mist/fume/vapor may cause respiratory tract irritation.
Prolonged and/or repeated skin contact with this product may cause
irritation/dermatitis.
This product may cause irritation to the eyes, respiratory system, and skin.
This product may cause irritation to the eyes.

=(B)================ TARGET ORGANS AND MEDICAL CONDITIONS =====================

Overexposure to some hazardous ingredients in this product has been found
to affect certain body organs and systems in experimental animals and/or
humans. These include:
Skin, Eyes, and Respiratory System

=(C)===================== ACUTE TOXICITY INFORMATION ==========================

Based on the composition of the product identified by the supplier,
selected portions of the acute toxicity information from RTECS are
as follows:

91-20-3 NAPHTHALENE
Oral, adult rat, LD50 = 1250 mg/kg
124-07-2 CAPRYLIC ACID
Oral, adult rat, LD50 = 10080 mg/kg
29385-43-1 TOLYLTRIAZOLE
Oral, adult rat, LD50 = 675 mg/kg
9003-11-6 POLYETHYLENE-POLYPROPYLENE GLYCOL
Oral, adult rat, LD50 = 9380 mg/kg
61791-26-2 TALLOW AMINE, ETHOXYLATED
Oral, adult rat, LD50 = 1850 mg/kg
122-39-4 DIPHENYLAMINE
Oral, adult guinea pig, LD50 = 300 mg/kg
7647-01-0 HYDROGEN CHLORIDE
Inhalation, adult rat, LC50 = 3124 ppm (1 Hour)
Oral, adult rabbit, LD50 = 900 mg/kg
10043-35-3 BORIC ACID (H3BO3)
Oral, adult rat, LD50 = 2660 mg/kg
1330-20-7 XYLENE (ALL ISOMERS)
Inhalation, adult rat, LC50 = 5000 ppm (4 Hours)
Oral, adult rat, LD50 = 4300 mg/kg
100-41-4 ETHYLBENZENE
Oral, adult rat, LD50 = 3500 mg/kg
Skin, adult rabbit, LD50 = 17800 mg/kg


http://www.mats.for.../aft_msds_generation.cgi?language=US&tox=157746&type=hak&context=N 7/26/02
157746 Page 4 of 6

62-53-3 ANILINE
Inhalation, mouse, LC50 = 175 ppm (7 Hours)
Oral, adult rat, LD5

======================= FIRE AND EXPLOSION INFORMATION ========================

This product is combustible at high temperatures.
Empty containers may retain product residue including Flammable or
Explosive vapors. Do not cut, drill, grind, or weld near full,
partially full, or empty product containers.
EXTINGUISHER INFORMATION: Dry chemical, foam, carbon dioxide, water fog.
Use water to cool fire-exposed containers, structures, and to
protect personnel.
A fine spray or fog of water will reduce the intensity of flames. Do not use
a solid stream of water, as this could spread the fire. Firemen should wear
a self-contained breathing apparatus.
Irritating and/or toxic fumes and gases may be emitted upon heating of
this product.

=============================== REACTIVITY DATA ===============================

This is a stable material.
Hazardous polymerization will not occur.
This product may react with strong oxidizing agents (bleach--sodium
hypochlorite, calcium hypochlorite, hydrogen peroxide, permanganate,
nitric acid, concentrated OXYGEN, perchlorates).

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or
low molecular weight hydrocarbons.

============================= PREVENTIVE MEASURES =============================

=(A)====================== SAFE HANDLING AND STORAGE ==========================

Do not breathe gas/fumes/vapor/spray.
Avoid getting this material into contact with your eyes.
Keep the container tightly closed and in a cool, well-ventilated place.
Avoid prolonged or repeated skin contact with this material.
Use this product with adequate ventilation.
Keep this product from heat, sparks, or open flame.
Avoid the generation of oil mists.

=(B)========================= PROTECTIVE MEASURES =============================

Use general ventilation and use local exhaust, where possible, in confined or
enclosed spaces.
Use of protective coveralls and long sleeves is recommended.
Wear safety glasses with side shields; chemical goggles (if splashing is
possible).
Use an organic vapor respirator for concentrations exceeding the Occupational
Exposure Limit.
Use of impervious gloves is recommended, such as neoprene.

=(C)===================== SPILLS, LEAKS AND DISPOSAL ==========================

Wear appropriate protective equipment and clothing during clean-up.
Do not allow this material to drain into sewers/water supplies.


http://www.mats.for.../aft_msds_generation.cgi?language=US&tox=157746&type=hak&context=N 7/26/02
157746 Page 5 of 6

Thoroughly wash the area after a spill or leak clean-up.
Waste disposal - This material should be disposed of separately or with plant
used motor oils, indicating the material's potential to cause skin
cancer with prolonged and repeated contact.
Absorb the spilled material with an inert absorbent (nonflammable) material.
Dispose of waste material according to Local, State, Federal, and
Provincial Environmental Regulation.

============================= FIRST AID TREATMENT =============================

In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice.
Remove contaminated clothing and wash before reuse.
If the material is swallowed, get immediate medical attention or advice --
Do not induce vomiting.
If gas/fume/vapor/dust/mist from the material is inhaled, remove the affected
person immediately to fresh air.
For skin contact, wash immediately with soap and water.
If irritation persists, get medical attention.
Wash thoroughly after handling.

============================= NOTES TO PHYSICIANS =============================

This material, if aspirated into the lungs, may cause chemical pneumonitis;
treat the affected person appropriately.

=============================== SPECIAL REMARKS ===============================


Petroleum distillate base oils used in the product are severely hydrotreated
and/or solvent refined.

===================== ENVIRONMENTAL INFORMATION: ECOLOGY ======================

Material contains a chemical which is a Ford Motor Company Material of
Concern. Use and release of this material should be minimized to the
greatest extent possible.
Material contains a chemical which is a Hazardous Air Pollutant (HAP),
regulated by the United States Clean Air Act.

========================== 14. Transport Information ==========================

U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.

Canadian Transportation of Dangerous Goods (T.D.G.) -TDGR Schedule II
This product is not regulated as a dangerous good.

Secretary of Communication and Transportation (SCT)- NOM-002-SCT2/1994 (Mexico)
This product has not been reviewed for this regulation.

International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product has not been reviewed for this regulation.

International Water Transportation - IMDG Code
This product has not been reviewed for this regulation.



http://www.mats.for.../aft_msds_generation.cgi?language=US&tox=157746&type=hak&context=N 7/26/02
157746 Page 6 of 6

=========================== PREPARATION INFORMATION ===========================

Health and safety information has been evaluated by:

Occupational & Environmental Health Sciences Department
Ford Motor Company
Central Laboratory Building - Rm S-120
15000 Century Drive
Dearborn, Michigan 48120

For 24 hour emergency information dial 1-800-959-3673.

This is the last page of this MSDS.

Date of Preparation: 07/24/02




http://www.mats.for.../aft_msds_generation.cgi?language=US&tox=157746&type=hak&context=N 7/26/02

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
0037_zep_65.asp 5989-27-5 112-34-5 75-28-5 106-97-8
0629_zep_klear.asp 67-56-1
148094_mercon_dexron_iii_atf.asp N/A
157746_motorcraft_mercon_v_atf.asp 72623-86-0 72623-84-8
163073_sae_5w-20_premium_synthetic_blend_motor_oil.asp N/A
164586_super_duty_motor_oil_-_all_grades.asp N/A
20000_thru_20036_colorplace_spray_enamel.asp N/A
30009014_blue_coral_tar_&_adhesive_remover.asp N/A
60130_battery_kleener.asp 07732-18-5 67-63-0 00106-97-8 144-55-8 00074-98-6
65475_mac_tools_pnematic_tool_oil.asp 68037-01-4
765-1151_balkamp_anti-seize_compound_&_lubricant.asp 64742-52-5 7440-50-8 64741-44-2 7429-90-5 64742-53-6 7782-42-5 7620-77-1 112926-00-8
8030_armor_all_protectant.asp 7732-18-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC