164586 Page 1 of 5
MATERIAL SAFETY DATA SHEET
Ford Internal Reference Number(Tox No. : 164586)
Print Date : 04/04/02
Language: English
Part Type and Number Part name
--------------------------------------- --------------------------------------
Motorcraft - U.S. XO-15W40-5QSD SAE 15W-40 SUPER DUTY MOTOR OIL
(FIVE QUART)
Motorcraft - U.S. XO-15W40-DSD SAE15W-40 SUPER DUTY MOTOR OIL (55
GALLON DRUM)
Motorcraft - U.S. XO-15W40-TSD SAE 15W-40 SUPER DUTY MOTOR OIL (275
GALLON TOTE)
Motorcraft - U.S. XO-15W40-GSD SAE 15W-40 SUPER DUTY MOTOR OIL
(GALLON)
Motorcraft - U.S. XO-15W40-BSD SAE 15W-40 SUPER DUTY MOTOR OIL
(BULK)
Motorcraft - U.S. XO-15W40-RSD SAE 15W-40 SUPER DUTY MOTOR OIL
(RAIL)
Motorcraft - U.S. XO-15W40-QSD1 SAE 15W-40 SUPER DUTY MOTOR OIL (1
US QUART - SAUDI ARABIA)
for use in saudi arabia only (arabic / english label)
Motorcraft - U.S. XO-15W40-DSD1 SAE 15W-40 SUPER DUTY MOTOR OIL (55
GALLON DRUM - SAUDI AA)
For use in saudi arabia only (arabic / english label)
Motorcraft - U.S. XO-10W30-QSD SAE 10W-30 SUPER DUTY MOTOR OIL
(QUART)
Motorcraft - U.S. XO-10W30-DSD SAE 10W-30 SUPER DUTY MOTOR OIL (55
GALLON DRUM)
Motorcraft - U.S. XO-30-QSD SAE 30 SUPER DUTY MOTOR OIL (QUART)
Motorcraft - U.S. XO-15W40-QSD SAE 15W-40 SUPER DUTY MOTOR OIL
(QUART)
This material has not been identified against a material Specification.
====================== CHEMICAL AND PHYSICAL PROPERTIES =======================
Appearance : Physical State VISCOUS LIQUID
Form -
Color AMBER
Specific Gravity (Relative Density) 0.86|0.89 at 60F
Boiling Point Not Applicable
Flash Point +180 掳C (+356 F) (PENSKY-MARTIN
CLOSED CUP)
pH full strength -
pH diluted -
Odor PETROLEUM HYDROCARBN
http://www.mats.ford..../aft_msds_generation.cgi?language=US&tox=164586&type=hak&context=N 4/4/02
164586 Page 2 of 5
Odor Threshold -
Viscosity -
Vapor Density >1 (AIR = 1)
Vapor Pressure -
Evaporation Rate -
Freezing Point -
Explosion Properties : UEL Not Determined
LEL Not Determined
Auto-ignition Temperature -
Solubility INSOLUBLE in Water
Partition Coefficient -
================== HAZARDOUS AND OTHER DISCLOSED INGREDIENTS ==================
Percent Exposure Limits - TWA
Range ACGIH/OSHA(where est.) CAS number Chemical Name
------------ ---------------------- ------------ --------------------------
>60 5/5 64742-54-7 PETROLEUM DISTILLATES
Ford= 1.0 mg/m3 HYDROTREATED HEAVY
PARAFFINIC
.1-<1 Not Regulated 2215-35-2 4-METHYL-2-PENTANOL ZINC
HYDROGEN
PHOSPHORODITHIOATE
Exposure Limit Abbreviations
--------------------------------------
TWA=Time Weighted Average C=Ceiling
S=Short Term Exposure Sk=Skin
Sol=Soluble Compounds Fu=Fumes
Insol=Insoluble Compounds Du=Dust I=IARC Resp=Respirable
=========================== REGULATORY INFORMATION ============================
Observe the Ford Exposure Limit of 1.0 mg/m3 for oil mist.
This product contains an ingredient(s) considered to be an environmental
hazardous substance(s) by the State of New Jersey.
This product contains an ingredients(s) considered to be a hazardous
substance(s) by the State of New Jersey.
California Proposition 65:
WARNING: This product contains a chemical known to the State of California
to cause cancer.
California Proposition 65:
WARNING: This product contains a chemical known to the State of California
to cause birth defects or other reproductive harm.
This product contains an ingredient(s) considered to be a hazardous substance
by the State of Pennsylvania (Pennsylvania Worker and Community Right to Know
Act).
================================= SIGNAL WORD =================================
CAUTION
http://www.mats.ford..../aft_msds_generation.cgi?language=US&tox=164586&type=hak&context=N 4/4/02
164586 Page 3 of 5
========================== HEALTH HAZARD INFORMATION ==========================
=(A)=============================== HAZARDS ===================================
Exposure to oil mist/fume/vapor may cause respiratory tract irritation.
Prolonged and/or repeated skin contact with this product may cause
irritation/dermatitis.
This product may cause irritation to the eyes.
=(B)================ TARGET ORGANS AND MEDICAL CONDITIONS =====================
Overexposure to some hazardous ingredients in this product has been found
to affect certain body organs and systems in experimental animals and/or
humans. These include:
Skin and Eyes
=(C)===================== ACUTE TOXICITY INFORMATION ==========================
Information for this section is not available.
======================= FIRE AND EXPLOSION INFORMATION ========================
EXTINGUISHER INFORMATION: Dry chemical, foam, carbon dioxide, water fog.
Wear self-contained breathing apparatus.
Water or foam may cause frothing if the product is heated above
93 degrees C (200 degrees F).
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or
low molecular weight hydrocarbons.
Empty container(s) may retain product residue -- solid, liquid, and/or
vapor -- and can be dangerous. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose such containers to heat, flame, sparks, static
electricity, or other sources of ignition. They may explode and cause
injury or death.
Water may be used to cool exposed containers to prevent pressure build-up
and explosion when exposed to extreme heat.
=============================== REACTIVITY DATA ===============================
This is a stable material.
Hazardous polymerization will not occur.
This product may react with strong oxidizing agents (bleach--sodium
hypochlorite, calcium hypochlorite, hydrogen peroxide, permanganate,
nitric acid, concentrated OXYGEN, perchlorates).
============================= PREVENTIVE MEASURES =============================
=(A)====================== SAFE HANDLING AND STORAGE ==========================
Keep the container closed when not in use.
Do not breathe gas/fumes/vapor/spray.
Avoid getting this material into contact with your eyes.
Avoid prolonged or repeated skin contact with this material.
Do not store this material in open or unlabeled containers.
Store this product in a cool, dry, well-ventilated place.
Use this product with adequate ventilation.
Avoid the generation of oil mists.
http://www.mats.ford..../aft_msds_generation.cgi?language=US&tox=164586&type=hak&context=N 4/4/02
164586 Page 4 of 5
=(B)========================= PROTECTIVE MEASURES =============================
Wear safety glasses with side shields; chemical goggles (if splashing is
possible).
Barrier creams that are specific for oil based materials are recommended when
gloves are impractical to use.
Use of impervious gloves is recommended, such as neoprene.
RESPIRATORY PROTECTION: If engineering controls do not maintain airborne
concentrations to a level which is adequate to protect worker health, an
approved respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory Protection
Standard 29 CFR 1910.134 and/or Canadian Standard CSA Z94.4.
=(C)===================== SPILLS, LEAKS AND DISPOSAL ==========================
Wear appropriate protective equipment and clothing during clean-up.
Thoroughly wash the area after a spill or leak clean-up.
Transport waste material to an authorized waste location, or incinerate under
controlled conditions.
Do not allow the spilled product to enter public drainage system or open water
courses.
Dispose of waste material according to Local, State, Federal, and
Provincial Environmental Regulation.
Surfaces may become slippery after spillage.
SPILLS AND LEAKS: Clean up small spills or leaks using appropriate
techniques such as absorption material (sand or other non-combustible
material) or pumping.
============================= FIRST AID TREATMENT =============================
In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice.
Remove contaminated clothing and wash before reuse.
If the material is swallowed, get immediate medical attention or advice --
Do not induce vomiting.
For skin contact, wash immediately with soap and water.
Wash thoroughly after handling.
If inhalation of gas/fume/vapor/dust/mist from the material is excessive (air
concentration is greater than the TLV or health effects are noticed),
immediatly remove the affected person(s) to fresh air.
===================== ENVIRONMENTAL INFORMATION: ECOLOGY ======================
Material contains a chemical which is a Ford Motor Company Material of
Concern. Use and release of this material should be minimized to the
greatest extent possible.
========================== 14. Transport Information ==========================
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) -TDGR Schedule II
This product is not regulated as a dangerous good.
Secretary of Communication and Transportation (SCT)- NOM-002-SCT2/1994 (Mexico)
http://www.mats.ford..../aft_msds_generation.cgi?language=US&tox=164586&type=hak&context=N 4/4/02
164586 Page 5 of 5
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code
This product is not regulated as a dangerous good.
=========================== PREPARATION INFORMATION ===========================
Health and safety information has been evaluated by:
Occupational & Environmental Health Sciences Department
Ford Motor Company
Central Laboratory Building - Rm S-120
15000 Century Drive
Dearborn, Michigan 48120
For 24 hour emergency information dial 1-800-959-3673.
This is the last page of this MSDS.
Date of Preparation: 03/18/02
http://www.mats.ford..../aft_msds_generation.cgi?language=US&tox=164586&type=hak&context=N 4/4/02
|