Hot Springs
MATERIAL SAFETY DATA SHEET
Version Number: 1 Preparation date: 2006-07-26
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: Hot Springs
MSDS #: MS0400066
Product code: 4039110, 4039520, 4039550
Recommended use: Cleaning product. This product is intended to be diluted prior to use.
Manufacturer, importer, supplier:
US Headquarters
The Butcher Company
8310 16th St.
Sturtevant, Wisconsin 53177-0902
Phone: 1-800-225-9475
MSDS Internet Address:
www.thebutchercompany.com
Emergency telephone number: 1-800-851-7145 (Prosar); 1-651-917-6133 (Int'l Prosar); 01-800-710-3400 (M茅xico)
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
鈥? WARNING
鈥? CAUSES EYE AND SKIN IRRITATION
_______________________________________________________________________________________________
Principle routes of exposure: Eye contact. Skin contact. Inhalation.
Eye contact: Severe eye irritation.
Skin contact: Severe skin irritation.
Inhalation: May be irritating to nose, throat, and respiratory tract.
Ingestion: May cause irritation to mouth, throat and stomach .
3. COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS COMPONENTS
Ingredient(s) CAS # Weight %
Sodium metasilicate 6834-92-0 1 - 5%
4. FIRST AID MEASURES
Eye contact: Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Get medical
attention.
Skin contact: Flush immediately with plenty of water for at least 15 minutes. Get medical attention.
Inhalation: If breathing is affected, remove to fresh air. Get medical attention.
Ingestion: Give a cupful of water or milk . THEN IMMEDIATELY CONTACT A PHYSICIAN OR POISON
CENTER. DO NOT induce vomiting unless directed to do so by medical personnel. Never give
anything by mouth to an unconscious person.
Aggravated Medical Conditions: Persons with pre-existing skin disorders may be more susceptable to irritating effects.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media:
The product is not flammable. Extinguish fire using agent suitable for surrounding fire .
Extinguishing media which must not be used for safety reasons:
No information available
Hot Springs 1 of 4
MS0400066 Version Number: 1 Preparation date: 2006-07-26
Special protective equipment for firefighters:
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear
Specific hazards: Not applicable
Unusual hazards: None known
Specific methods: No special methods required
NFPA Health: 2 Flammability: 0 Instability: 0
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Use personal protective equipment
Environmental precautions Clean-up methods - large spillage. Absorb spill with inert material (e.g. dry sand or earth), then place in
and clean-up methods: a chemical waste container. Use a water rinse for final clean-up.
7. HANDLING AND STORAGE
Handling: Avoid contact with skin, eyes and clothing. Do not taste or swallow. Remove and wash contaminated
clothing and footwear before re-use. Wash thoroughly after handling. Product residue may remain on/in
empty containers. All precautions for handling the product must be used in handling the empty
container and residue. FOR COMMERCIAL AND INDUSTRIAL USE ONLY.
Storage: Protect from freezing. Keep tightly closed in a dry, cool and well-ventilated place. KEEP OUT OF THE
REACH OF CHILDREN.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures to reduce exposure:
No special ventilation requirements. General room ventilation is adequate.
Personal Protective Equipment
Eye protection: Chemical splash goggles.
Hand protection: Chemical resistant gloves
Skin and body protection: No special protective clothing is required.
Respiratory protection: No special protective clothing is required.
Hygiene measures: Handle in accordance with good industrial hygiene and safety practice
HMIS Health 2 Fire Hazard 0 Reactivity 0
Personal protective equipment
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid Appearance: Liquid
Color: Yellow - Green Odor: Herbal
pH: 12.75 Dilution pH: No information available.
Specific gravity: 1.025 Density: 8.55 lbs/gal
Bulk density: No information available Vapor density: No information available
Evaporation Rate No information available Viscosity: No information available
Solubility: Easily soluble VOC: 0.25% *
Solubility in other solvents: No information available
Partition coefficient (n-octanol/water): No information available
Boiling point/range: Not determined
Melting point/range: Not determined
Flash point: >200 (掳F) >93.3 (掳C)
Decomposition temperature: Not determined
Autoignition temperature: No information available
2 of 4
MS0400066 Version Number: 1 Preparation date: 2006-07-26
9. PHYSICAL AND CHEMICAL PROPERTIES
Elemental Phosphorus: 0 %P
* - Title 17, California Code of Regulations, Division 3, Chapter 1, Subchapter 8.5, Article 2, Consumer Products, Sections 94508
10. STABILITY AND REACTIVITY
Stability: The product is stable
Polymerization: Hazardous polymerization does not occur
Materials to avoid: Acids.
Hazardous decomposition products: None reasonably foreseeable.
11. TOXICOLOGICAL INFORMATION
HAZARDOUS COMPONENTS
Ingredient(s) LD50 Oral - Rat LD50 Dermal - Rabbit LC50 Inhalation - Rat
Sodium metasilicate = 600 mg/kg Not available Not available
Acute toxicity Oral LD50 estimated to be greater than 5000 mg/kg
Chronic toxicity: None known
Specific effects
Carcinogenic effects: None known
Mutagenic effects: None known
Reproductive toxicity: None known
Target organ effects: None known
12. ECOLOGICAL INFORMATION
Environmental Information: No data available
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused products:
Dispose of according to all federal, state and local applicable regulations
RCRA Hazard Class: D002
14. TRANSPORT INFORMATION
DOT/TDG: Please refer to the Bill of Lading/receiving documents for up to date shipping information
15. REGULATORY INFORMATION
International Inventories
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL).
U.S. Regulations
California Proposition 65: This product is not subject to the reporting requirements under California's Proposition 65
STATE RIGHT TO KNOW
Ingredient(s) CAS # MARTK: NJRTK: PARTK: RIRTK:
Water 7732-18-5 - - - -
Sodium metasilicate 6834-92-0 - - - -
Tetrasodium salt of EDTA 64-02-8 - - - -
Alcohol ethoxylates 34398-01-1 - - - -
Amphoteric surfactant (19469) TS* - - - -
3 of 4
MS0400066 Version Number: 1 Preparation date: 2006-07-26
CERCLA/ SARA
SARA 311/312 Hazard Categories
Immediate: Y
Canada
WHMIS hazard class: D2B Toxic materials .
16. OTHER INFORMATION
Reason for revision: Not applicable
Prepared by: NAPRAC
Additional advice: None
Notice to Reader: This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty,
express or implied, as to the accuracy of the information contained within. Actual conditions of use and handling are beyond seller's control. User is
responsible to evaluate all available information when using product for any particular use and to comply with all Federal, State, Provincial and
Local laws and regulations.
4 of 4
|