MATERIAL SAFETY DATA SHEET (MSDS)
MATERIAL SAFETY DATA SHEET
EM SCIENCE
|1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Manufacturer.............: Preparation Date.: 5/12/98
EM SCIENCE
A Division of EM Industries Information Phone Number.: 856-423-6300
P.O. Box 70 Hours: Mon. to Fri. 8:30-5
480 Democrat Road Chemtrec Emergency Number: 800-424-9300
Gibbstown, N.J. 08027 Hours: 24 hrs a day
Catalog Number(s):
0088825B 0088826C 0088826I ZX0110
Product Name:
Zinc Sulfate
Synonyms:
Zinc Sulfate, Monohydrate
Chemical Family:
Metal Salt
Formula:
ZnSO4 . H2O
Molecular Weight.:
179.45
2. COMPOSITION / INFORMATION ON INGREDIENTS
Component CAS # Appr %
____________________________________________________________
Zinc Sulfate
7446-19-7 100%
|3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
IRRITATING TO SKIN, EYES AND MUCOUS MEMBRANES.
MAY BE HARMFUL IF SWALLOWED.
Appearance:
White powder
POTENTIAL HEALTH EFFECTS (ACUTE AND CHRONIC)
Symptoms of Exposure:
Irritating to skin, mucous membranes, respiratory tract, lungs. Irritating to the eyes; may cause eye damage with prolonged
contact. Contact with open skin may cause ulceration, therefore make sure that any cut skin is bandaged before handling
material. After ingestion, irritation of mucous membranes in the mouth and gastrointestinal tract will occur. Vomiting and
diarrhoea may also occur.
Medical Cond. Aggravated by Exposure:
Pre-existing skin or respiratory
disorders.
Routes of Entry:
Inhalation, ingestion
Carcinogenicity:
The material is not listed (IARC, NTP, OSHA) as cancer causing
agent.
|4. FIRST AID MEASURES
Emergency First Aid:
GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE.
Skin: Immediately flush thoroughly with large amounts of water.
Eyes: Immediately flush thoroughly with water for at least 15
minutes.
Inhalation: Remove to fresh air; give artificial respiration if
breathing has stopped.
Ingestion: If conscious, drink water and induce vomiting
immediately as directed by medical personnel. Never give anything
by mouth to an unconscious person.
Remove contaminated clothing and wash before reuse.
5. FIRE FIGHTING MEASURES
Flash Point (F): None
Flammable Limits LEL (%): N/A
Flammable Limits UEL (%): N/A
Extinguishing Media:
Use any suitable for adjacent material.
Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing.
Fire & Explosion Hazards:
Thermal decomposition produces toxic fumes.
6. ACCIDENTAL RELEASE MEASURES
Spill Response:
Evacuate the area of all unnecessary personnel. Wear suitable protective equipment listed under Exposure / Personal
Protection. Eliminate any ignition sources until the area is determined to be free from explosion or fire hazards. Contain the
release and eliminate its source, if this can be done without risk. Take up and containerize for proper disposal as described
under Disposal. Comply with Federal, State, and local regulations on reporting releases. Refer to Regulatory Information for
reportable quantity and other regulatory data.
7. HANDLING AND STORAGE
Handling & Storage:
Keep container tightly closed. Store in a cool, dry, well-ventilated area. Do not breathe dust. Do not get in eyes, on skin, or
on clothing. Retained residue may make empty containers hazardous; use caution!
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS AND PERSONAL PROTECTIVE EQUIPMENT:
Ventilation, Respiratory Protection, Protective Clothing, Eye Protection:
Respiratory Protection: If workplace exposure limit(s) of product or any component is exceeded (see TLV/PEL), a
NIOSH/MSHA approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations
also permit other NIOSH/MSHA respirators (negative pressure type) under specified conditions (see your safety equipment
supplier). Engineering and/or administrative controls should be implemented to reduce exposure. Material should be handled
or transferred in an approved fume hood or with adequate ventilation. Protective gloves should be worn to prevent skin
contact (Neoprene or equivalent) Safety glasses with side shields must be worn at all times. Impervious protective clothing
should be worn to prevent skin contact.
Work/Hygenic Practices:
Wash thoroughly after handling. Do not take internally. Eye wash and safety equipment should be readily available.
EXPOSURE GUIDELINES
OSHA - PEL:
TWA STEL CL
Component PPM MG/M3 PPM MG/M3 PPM MG/M3 Skin
____________________________________________________________
Zinc Sulfate
ACGIH - TLV:
TWA STEL CL
Component PPM MG/M3 PPM MG/M3 PPM MG/M3 Skin
____________________________________________________________
Zinc Sulfate
If there are no exposure limit numbers listed in the Exposure Guidelines chart, this indicates that no OSHA or ACGIH
exposure limts have been established.
9. PHYSICAL AND CHEMCIAL PROPERTIES
Boiling Point (C 760 mmHg) : N/A
Melting Point (C) : N/A
Specific Gravity (H2 0 = 1) : N/A
Vapor Pressure (mm Hg) : N/A
Percent Volatile by vol (%): N/A
Vapor Density (Air = 1) : N/A
Evaporation Rate (BuAc = 1): N/A
Solubility in Water (%) : Soluble
Appearance :
White powder
10. STABILITY AND REACTIVITY
Stability: Yes
Hazardous Polymerization:
Does not occur
Hazardous Decomposition:
ZnO, SOx
Conditions to Avoid:
Extreme heat
Materials To Avoid:
(X) Water
(X) Acids
() Bases
() Corrosives
() Oxidizers
() Other:
11. TOXICOLOGICAL INFORMATION
Toxicity Data
None established.
Toxicological Findings:
None
Cited in Registry of Toxic Effects of Chemical Substances (RTECS)
12. DISPOSAL CONSIDERATIONS
EPA Waste Numbers:
Treatment:
Material does not have an EPA Waste number and is not a listed waste, however consultation with a permitted waste
disposal site (TSD) should be accomplished.
ALWAYS CONTACT A PERMITTED WASTE DISPOSER (TSD) TO ASSURE COMPLIANCE WITH ALL
CURRENT LOCAL, STATE AND FEDERAL REGULATIONS.
13. TRANSPORT INFORMATION
DOT Proper Shipping Name:
Environmentally Hazardous Substance, Solid, n.o.s. (Zinc Sulfate)
DOT ID Number :
UN3077
14. REGULATORY INFORMATION
TSCA Statement:
This product is a "Mixture". The CAS numbers of all components
are listed on the TSCA Inventory.
SARA SARA CERCLA
Component EHS EHS TPQ RQ
(302) (lbs) (lbs)
____________________________________________________________
Zinc Sulfate
OSHA SARA
DeMinimis
Component Floor List 313
for SARA 313
(%)
____________________________________________________________
Zinc Sulfate
If there is no information listed on the regulatory information chart, this indicates that the chemical is not covered by the
specific regulation listed.
15. OTHER INFORMATION
Comments:
ZX0110 was previously found on the MSDS with ZX0105.
NFPA Hazard Ratings:
Health :2
Flammability :0
Reactivity :0
Special Hazards :
Revision History: 12/15/89 3/1/91 1/19/94
| = Revised Section
N/A = Not Available
N/E = None Establised
The statements contained herein are offered for informational purposes only and are based upon technical data that EM
Science believes to be accurate. It is intended for use only by persons having the necessary technical skill and at their own
discretion and risk. Since conditions and manner of use are outside our control, we make NO WARRANTY, EXPRESS OR
IMPLIED, OR MERCHANTABILITY, FITNESS OR OTHERWISE.
|