MATERIAL SAFETY DATA SHEET
CBP GROUT, CONCRETE & MASONRY SEALER
HMIS
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
H
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
CUSTOM BUILDING PRODUCTS CUSTOM BUILDING PRODUCTS
10400 Pioneer Blvd., Unit #3 10400 Pioneer Blvd., Unit #3
Santa Fe Springs, CA 90670 UNITED STATES Santa Fe Springs, CA 90670 UNITED STATES
Company Contact: GEORGE MARCINA Company Contact: GEORGE MARCINA
Telephone Number: (562) 968-2980 Ext 103 Telephone Number: (562) 968-2980 Ext 103
FAX Number: (562) 903-2697 FAX Number: (562) 903-2697
E-Ma il: georgem@cbpmail.net E-Ma il: georgem@cbpmail.net
Web Site: www.custombuildingproducts.com Web Site: www.custombuildingproducts.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
GEORGE MARCINA: (562) 968-2980 GEORGE MARCINA: (562) 968-2980
Issue Date: 03/16/2006
Product Name: CBP GROUT, CONCRETE & MASONRY SEALER
CAS Number: Not Established
Chemical Formula: MIXTURE
MSDS Number: 553
Product Code: 3067
2. Composition/Information On Ingredients
THIS PRODUCT DOES NOT CONTAIN HAZARDOUS CHEMICALS AS DEFINED BY 29 CFR 1910.1200.
3. Hazards Identification
Primary Routes(s) Of Entry
EYES, SKIN AND NOSE.
Eye Hazards
MAY CAUSE IRRITATION.
Skin Hazards
MAY CAUSE IRRITATION.
Ingestion Hazards
SWALLOWING SUBSTANTIAL AMOUNTS MAY CAUSE HARM.
Inhalation Hazards
MAY CAUSE IRRITATION.
Conditions Aggravated By Exposure
MAY ENHANCE ALLERGIC CONDITIONS.
Conditions Aggravated By Overexposure
PRE EXISTING SKIN CONDITIONS.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
CBP GROUT, CONCRETE & MASONRY SEALER
3. Hazards Identification - Continued
Conditions Aggravated By Overexposure - Continued
4. First Aid Measures
Eye
FLUSH WITH WATER FOR 15 MINUTES. OBTAIN IMMEDIATE MEDICAL ATTENTION.
Skin
FLUSH WITH WATER.
Ingestion
OBTAIN MEDICAL ATTENTION.
Inhalation
REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION.
5. Fire Fighting Measures
Flash Point: NONE 掳F
Lower Explosive Limit: N/A
Upper Explosive Limit: N/A
Fire And Explosion Hazards
NOT APPLICABLE.
Extinguishing Media
PRODUCT IS NON-COMBUSTIBLE.
Fire Fighting Instructions
SELF-CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING
FIRES INVOLVING CHEMICALS.
6. Accidental Release Measures
IN CASE MATERIAL IS RELEASED OR SPILLED, USE ABSORBENT MATERIAL TO COLLECT AND CONTAIN FOR
SALVAGE OR DISPOSAL.
7. Handling And Storage
Handling And Storage Precautions
STORE IN COOL PLACE.
Work/Hygienic Practices
GOOD PRACTICES REQUIRE THAT GROSS AMOUNT OF ANY CHEMICAL BE REMOVED FROM SENSITIVE
SKIN AS SOON AS POSSIBLE.
8. Exposure Controls/Personal Protection
Eye/Face Protection
USE SAFETY GOGGLES.
Skin Protection
USE PROTECTIVE GLOVES AS A MINIMUM AND WASH PROMPTLY.
Respiratory Protection
LOCAL EXHAUST VENTILATION IS USUALLY ADEQUATE.
Other/General Protection
LOCAL EXHAUST IS RECOMMENDED.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
CBP GROUT, CONCRETE & MASONRY SEALER
9. Physical And Chemical Properties
Appearance
PALE LIQUID.
Odor
Mild
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: 212 掳F 100 掳C
Specific Gravity: 1.0
Percent Volatiles: 95%
Percent VOCs: 0
Vapor Density: Water
pH Factor: NEUTRAL
Solubility: FULLY MISCIBLE
Evaporation Rate: SLOWER THAN ETHER.
10. Stability And Reactivity
Sta bility: STABLE
Hazardous Polymerization: WILL NOT OCCUR.
Conditions To Avoid (Stability)
EXCESSIVE HEAT.
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE, FEDERAL REGULATIONS, CONCERNING HEALTH AND
POLLUTION.
RCRA Information
NOT RCRA WASTE
14. Transport Information
No Data Available...
15. Regulatory Information
No Data Available...
16. Other Information
HMIS Rating
He a lth: 1
Fire : 0
Re a ctivity: 0
Personal Protection: H
Revision/Preparer Information
MSDS Preparer: GEORGE MARCINA
MSDS Preparer Phone Number: 562/968-2980 EXT 103
This MSDS Supercedes A Previous MSDS Dated: 11/10/2005
Page 3 of 4
MATERIAL SAFETY DATA SHEET
CBP GROUT, CONCRETE & MASONRY SEALER
Disclaimer
THE INFORMATION PRESENTED HERE IS BELIEVED TO BE ACCURATE BUT IS NOT WARRANTED TO BE,
WHETHER ORIGINATING WITH THE COMPANY OR NOT. RECIPIENTS ARE ADVISED TO CONFIRM IN
ADVANCE OF NEED, THAT THE INFORMATION IS CURRENT, APPLICABLE, AND SUITABLE TO THEIR
CIRCUMSTANCES.
CUSTOM BUILDING PRODUCTS
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|