MATERIAL SAFETY DATA SHEET
EasyBoard
HMIS
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
B
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
CUSTOM BUILDING PRODUCTS CUSTOM BUILDING PRODUCTS
10400 Pioneer Blvd., Unit #3 10400 Pioneer Blvd., Unit #3
Santa Fe Springs, CA 90670 UNITED STATES Santa Fe Springs, CA 90670 UNITED STATES
Company Contact: GEORGE MARCINA Company Contact: GEORGE MARCINA
Telephone Number: (562) 968-2980 Ext 103 Telephone Number: (562) 968-2980 Ext 103
FAX Number: (562) 903-2697 FAX Number: (562) 903-2697
E-Ma il: georgem@cbpmail.net E-Ma il: georgem@cbpmail.net
Web Site: www.custombuildingproducts.com Web Site: www.custombuildingproducts.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
GEORGE MARCINA: (562) 968-2980 GEORGE MARCINA: (562) 968-2980
Issue Date: 10/10/2007
Product Name: EasyBoard
Chemical Name: Polyurethane foam
CAS Number: Not Established
MSDS Number: 1013
Product Code: JM
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
COATED GLASS MAT Not Establ.
CONTINUOUS FILAMENT GLASS FIBERS Not Establ.
ISOPENTANE 78-78-4
METHYLENE BIS(PHENYLISOCYANATE)MBI or MDI 101-68-8
PENTANE 109-66-0
POLYISOCYANURATE FOAM Not Establ.
POLYMERIC COLORANT BLEND Not Establ.
3. Hazards Identification
Primary Routes(s) Of Entry
Inhalation, Skin Contact, Eye Contact, Ingestion
Eye Hazards
May cause temporary eye irritation.
Skin Hazards
May cause temporary irritation.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
EasyBoard
3. Hazards Identification - Continued
Ingestion Hazards
May cause temporary gastronomical track irritation.
Inhalation Hazards
May cause temporary upper respiratory tract irritation - scratchy throat, coughing and congestion.
Chronic/Carcinogenicity Effects
Components:
Continuous filament glass:
ACGIH: A4 - Not classifiable as Human Carcinogen
IARC: Group 3 - Not classifiable
Methylene bis(polyisocyanate) (MBI or MDI)
IARC: Group 3 - Not classifiable
Conditions Aggravated By Exposure
Pre-existing chronic respiratory, skin or eye diseases or conditions.
Wash hands before eating or using restroom.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get
medical attention immediately if irritation develops and persists.
Skin
Wash skin with soap and plenty of water for at least 15 minutes. Get medical attention immediately if irritation
develops and persists.
Ingestion
Get medical attention immediately.
Inhalation
If inhaled, remove to fresh air. Consult a physician immediately if irritation persists. Do not give an unconscious
person anything to drink.
Note To Physician
Mechanical irritant.
5. Fire Fighting Measures
Flash Point: N/A 掳F
Flash Point Method: N/A
Lower Explosive Limit: N/A
Upper Explosive Limit: N/A
Fire And Explosion Hazards
Product is combustible. Burning will create thick, black smoke.
Extinguishing Media
Dry Chemical, CO2, Foam, Water
Fire Fighting Instructions
Avoid breathing vapors, gases and fumes. Firefighters should wear self-contained breathing apparatus and full
protective gear.
6. Accidental Release Measures
Sweep up. Vacuum dust. If sweeping - use water as dust suppressant. Use appropriate personal protective equipment.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
EasyBoard
7. Handling And Storage
Handling And Storage Precautions
Use with adequate ventilation.
Handling Precautions
Avoid creating and breathing dust. Avoid contact with skin and eyes.
Storage Precautions
Keep dry until ready to use.
Work/Hygienic Practices
Use good personal hygiene. Wash with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate ventilation.
Eye/Face Protection
Safety glasses with side shields. Use ear plugs to protect ears from airborne dust from entering the ears.
Skin Protection
Leather or cotton gloves. Barrier creams. Wear long sleeved shirts, long pants and caps to protect skin from
irritation.
Respiratory Protection
Provide adequate exhaust in areas where cutting occurs. In case of inadequate ventilation and when exposed to dust
above the recommended limits, wear a suitable NIOSH-approved respirator.
Other/General Protection
Wash clothing separately from other laundry to prevent transfer of fibers.
Ingredient(s) - Exposure Limits
COATED GLASS MAT
Nuisance dust
Respirable fraction - 5mg/m3
Total dust 15 mg /m3
CONTINUOUS FILAMENT GLASS FIBERS
Nuisance dust
Respirable portion - 5mg/m3
Total dust - 15 mg/m3
ISOPENTANE
ACGIH TLV-TWA 600 ppm
METHYLENE BIS(PHENYLISOCYANATE) MBI or MDI
ACGIH TWA - 0.005 ppm
OSHA - 0.02 ppm Ceiling
OSHA - 0.2 mg /m3 Ceiling
PENTANE
ACGIH TLV-TWA 600 ppm
OSHA PEL-TWA 1,000 ppm
9. Physical And Chemical Properties
Appearance
Yellow to tan foam.
Odor
Mild
Chemical Type: Mixture
Page 3 of 5
MATERIAL SAFETY DATA SHEET
EasyBoard
9. Physical And Chemical Properties - Continued
Odor - Continued
Physical State: Solid
Percent VOCs: Negligible
Solubility: Negligible
10. Stability And Reactivity
Sta bility: STABLE
Hazardous Polymerization: WILL NOT OCCUR.
Conditions To Avoid (Stability)
Avoid heat, sparks, flame.
Incompatible Materials
Acetone, methyl ethyl ketone, tetrahydrofuran, hydrogen peroxide, ethylene dichloride, dimethyl sulfoxide, dimethyl
formamide.
Hazardous Decomposition Products
Carbon monoxide and dioxide, traces of hydrgen cyanide
Stable
11. Toxicological Information
Chronic/Carcinogenicity
Components:
Continuous filament glass:
ACGIH: A4 - Not classifiable as Human Carcinogen
IARC: Group 3 - Not classifiable
Methylene bis(polyisocyanate) (MBI or MDI)
IARC: Group3 - Not classifiable
Conditions Aggravated By Exposure
Pre-existing chronic respiratory, skin or eye diseases or conditions.
Ingredient(s) - Toxicological Data
ISOPENTANE
Inhalation LC 50 = 280000 mg/m3 / 4 H
METHYLENE BIS(PHENYLISOCYANATE) MBI or MDI
Oral LD 50 = 9200 mg / kg - rat
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
RCRA Information
Not considered RCRA Hazardous Waste.
14. Transport Information
DOT Shipping Label
NOT REGULATED
15. Regulatory Information
No Data Available...
Page 4 of 5
MATERIAL SAFETY DATA SHEET
EasyBoard
15. Regulatory Information - Continued
Ingredient(s) - State Regulations
ISOPENTANE
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
METHYLENE BIS(PHENYLISOCYANATE) MBI or MDI
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
PENTANE
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
16. Other Information
HMIS Rating
He a lth: 1
Fire : 0
Re a ctivity: 0
Personal Protection: B
Revision/Preparer Information
MSDS Preparer: GEORGE MARCINA
MSDS Preparer Phone Number: (562) 968-2980 ext 103
This MSDS Supersedes A Previous MSDS Dated: 12/14/2006
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no
representations as to the accuracy or completeness of the information contained therein, and assume no
responsibility regarding the suitablility of this information for the user's intended purposes or for the consequences of
its use. Each individual should make a determination as to the suitability of the information for their particular
purposes(s).
CUSTOM BUILDING PRODUCTS
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|