Page 1 of 2
May 2008
MATERIAL SAFETY DATA SHEET
MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200 AND SUPERFUND
AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC LAW 99-499. STANDARD
SHOULD BE CONSULTED FOR SPECIFIC REQUIREMENTS.
SECTION I (IDENTIFICATION)
MANUFACTURER/ EUTECTIC CORPORATION TELEPHONE NUMBER:
SUPPLIERS NAME: N94 W14355 Garwin Mace Drive 1-800-558-8524
Menomonee Falls, WI 53051 USA
ABRACOR 庐 5 - Hardener
PRODUCT NAME: (Formula 5)
PRODUCT CLASSIFICATION: Epoxy Curing Agent
SECTION II (HAZARDOUS INGREDIENTS/IDENTITY INFORMATION)
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes and gases produced during
normal use of these products are covered in Section V. The term "Hazardous" in "Hazardous Ingredients" should not only be interpreted as a
term required and defined in OSHA Hazard Communication Standard (29 CFR Part 1910.1200), but also as defined by other regulatory
agencies. The chemicals or compounds subject to reporting under Title III, in Section 313, of the Superfund Amendments and
Reauthorization Act (SARA) are marked by the symbol #.
EXPOSURE LIMIT (mg/m鲁) Weight
CAS NUMBER OSHA PEL ACGIH-TLV PERCENT INGREDIENTS
INGREDIENTS
Aliphatic Amine 26950-63-0 (> 75 %) & n.a. n.a. 20 - 30
112-24-3 (< 25 %) n.a. n.a.
Inorganic Fillers Mixture n.a. n.a. 70 - 80
Exposure limits are subject to change. Contact ACGIH, OSHA, NIOSH, and IARC for current values.
SECTION III (PHYSICAL DATA)
Form: Thick, gritty paste Odor: Ammonia Color: Black Specific Gravity: 2.10 Solubility in water: Slight
SECTION IV (FIRE AND EXPLOSION HAZARD DATA)
Flash Point: > 347 oF Extinguishing media: Water fog, CO2, dry chemical or foam. Fire fighting equipment: Water or foam may
cause frothing which can be violent and life threatening if sprayed directly into burning liquid. Use self-contained breathing apparatus with
full face piece and full bunker gear with butyl rubber boots, gloves and suit.
Rating under National Fire Protection 704: Health, 2; Flammability, 0; Reactivity, 0.
SECTION V (REACTIVITY DATA)
STABILITY: Stable CONDITIONS TO AVOID: Extreme heat
INCOMPATIBILITY (conditions to avoid): Strong oxidizing agents, mineral acids, mineral bases, organic acids, organic bases, aliphatic
amines, sodium or calcium hypochlorites, and peroxides.
HAZARDOUS PRODUCTS: When product burns, it may form toxic materials, carbon monoxide and carbon dioxide, ammonia, nitrogen
oxides, various hydrocarbons, etc.
SECTION VI (HEALTH HAZARD DATA)
Effects of Exposure:
PRIMARY ROUTES OF ENTRY are the respiratory system, eyes, and/or skin.
PREEXISTING respiratory or allergic conditions may be aggravated in some individuals.
SHORT TERM (ACUTE) OVEREXPOSURE:
INGESTION: Product is corrosive to mouth, throat and stomach. Moderately toxic if swallowed.
INHALATION: Vapors can be corrosive to the respiratory system.
SKIN CONTACT: Corrosive to skin. May cause sensitization. May be toxic if absorbed through skin.
EYE CONTACT: Corrosive to eyes, may cause severe damage. Vapors may irritate eyes.
MSD: ABRACOR 庐 - Hardener (Formula 5) Page 2 of 2
LONG TERM (CHRONIC) OVEREXPOSURE :
Repeated exposures are not anticipated to cause significant adverse effects. Some medical conditions may be aggravated by exposure
(asthma, bronchitis, emphysema, eye disease, liver disorders, and allergies). Contains materials that may be carcinogenic.
Emergency & First Aid Procedures:
Call for medical aid. Employ first aid techniques recommended by The American Red Cross.
SWALLOWING: Call a physician. Advise of Section II ingredients.
SKIN: Wash thoroughly with water to remove all residue. If a rash develops, call a physician.
INHALATION: Remove to fresh air. Provide oxygen if necessary. See a physician if persistent feeling of discomfort is
experienced.
EYES: Flush with water for at least 15 minutes to remove all residue. Get medical attention immediately.
SECTION VII (PRECAUTION FOR SAFE HANDLING AND USE/APPLICABLE CONTROL MEASURES)
Read and understand the manufacturer's instructions and precautionary label on this product.
Exposure Guidelines: None established.
Personal Protection: Wear protective gloves and eye protection when using this product and proper clothing to cover skin.
Respiratory Protection: Not ordinarily required unless grinding, machine or burning of products is necessary. Required if working with
product at elevated temperature.
Ventilation: Use general mechanical ventilation. Exhaust required for application in confined areas.
Spills / Leaks: Scrape or wipe up with suitable material for disposal. Flush contaminated area with water.
Waste: Dispose of waste residues in landfill and in accordance with EPA or local regulations.
Storage: Store in dry conditions, ambient temperatures. Keep in closed container.
Transportation: Not subject to classification.
The information in this MSDS was obtained from sources we believe are reliable. However, this information is provided without any
representation or warranty, expressed or implied, regarding accuracy or correctness. The conditions or methods of handling, storage, use, and
disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons we do not assume responsibility
and expressly disclaim liability of loss, damage, or expense arising from it or in any way connected with the handling, storage, use, or
disposal of the product.
Page 1 of 2
May 2008
MATERIAL SAFETY DATA SHEET
MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200 AND SUPERFUND
AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC LAW 99-499. STANDARD
SHOULD BE CONSULTED FOR SPECIFIC REQUIREMENTS.
SECTION I (IDENTIFICATION)
MANUFACTURER/ EUTECTIC CORPORATION TELEPHONE NUMBER:
SUPPLIERS NAME: N94 W14355 Garwin Mace Drive 1-800-558-8524
Menomonee Falls, WI 53051 USA
ABRACOR 庐 5 - Resin (Formula 5)
PRODUCT NAME:
PRODUCT CLASSIFICATION: Epoxy Resin
SECTION II (HAZARDOUS INGREDIENTS/IDENTITY INFORMATION)
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes and gases produced during
normal use of these products are covered in Section V. The term "Hazardous" in "Hazardous Ingredients" should not only be interpreted as a
term required and defined in OSHA Hazard Communication Standard (29 CFR Part 1910.1200), but also as defined by other regulatory
agencies. The chemicals or compounds subject to reporting under Title III, in Section 313, of the Superfund Amendments and
Reauthorization Act (SARA) are marked by the symbol #.
EXPOSURE LIMIT (mg/m鲁) Weight
CAS NUMBER OSHA PEL ACGIH-TLV PERCENT INGREDIENTS
INGREDIENTS
Bisphenol A / Epichlorohydrin 25068-38-6 n.a. n.a. 10 - 20
Bisphenol F 28064-14-4 n.a. n.a. 0 - 10
Hydrocarbon Resin n.a. n.a. n.a. 0 - 10
Aluminum Oxide 1344-28-1 5 10 70 鈥? 80
Exposure limits are subject to change. Contact ACGIH, OSHA, NIOSH, and IARC for current values.
SECTION III (PHYSICAL DATA)
Form: Thick, gritty paste Odor: Sweet Color: White Solubility in water: Insoluble
SECTION IV (FIRE AND EXPLOSION HAZARD DATA)
Flash Point: > 200 oF Extinguishing media: Water spray, CO2, dry chemical or foam. Fire fighting equipment: Water or foam may
cause frothing which can be violent and life threatening if sprayed directly into burning liquid. Use self-contained breathing apparatus with
full face piece and full bunker gear with butyl rubber boots, gloves and suit.
Rating under National Fire Protection 704: Health, 2; Flammability, 0; Reactivity, 0.
SECTION V (REACTIVITY DATA)
STABILITY: Stable CONDITIONS TO AVOID: Extreme heat
INCOMPATIBILITY (conditions to avoid): Strong oxidizing agents, acids, bases, and amines.
HAZARDOUS PRODUCTS: When product burns, it may form toxic materials, carbon monoxide and carbon dioxide, aldehydes, various
hydrocarbons, etc.
SECTION VI (HEALTH HAZARD DATA)
Effects of Exposure:
PRIMARY ROUTES OF ENTRY are the respiratory system, eyes, and/or skin.
PREEXISTING respiratory or allergic conditions may be aggravated in some individuals.
SHORT TERM (ACUTE) OVEREXPOSURE:
INGESTION: May be slightly toxic.
INHALATION: No adverse affects anticipated. Irritation may be caused if product is above room temperature.
SKIN CONTACT: May cause sensitization, reddening, irritation, dermatitis, after prolonged or repeated exposure.
EYE CONTACT: May cause eye irritation.
MSDS: ABRACOR 庐 5 - Resin (Formula 5) Page 2 of 2
LONG TERM (CHRONIC) OVEREXPOSURE: Some medical conditions may be aggravated by exposure.
Emergency & First Aid Procedures:
Call for medical aid. Employ first aid techniques recommended by The American Red Cross.
SWALLOWING: Call a physician. Advise of Section II ingredients.
SKIN: Wash thoroughly with water to remove all residue. If a rash develops, call a physician.
INHALATION: Remove to fresh air. Provide oxygen if necessary. See a physician if persistent feeling of discomfort is
experienced.
EYES: Flush with water for at least 15 minutes to remove all residue. Get medical attention immediately.
SECTION VII (PRECAUTION FOR SAFE HANDLING AND USE/APPLICABLE CONTROL MEASURES)
Read and understand the manufacturer's instructions and precautionary label on this product.
Exposure Guidelines: None established.
Personal Protection: Wear protective gloves and eye protection when using this product and proper clothing to cover skin.
Respiratory Protection: Not ordinarily required unless grinding, machine or burning of products is necessary. Use organic respirator to
avoid breathing mists or vapors from product at elevated temperature.
Ventilation: Use general mechanical ventilation. Exhaust required for application in confined areas.
Spills / Leaks: Scrape or wipe up with suitable material for disposal. Flush contaminated area with water.
Waste: Dispose of waste residues in landfill and in accordance with EPA or local regulations.
Storage: Store in dry conditions, ambient temperatures. Keep in closed container.
Transportation: Not subject to classification.
The information in this MSDS was obtained from sources we believe are reliable. However, this information is provided without any
representation or warranty, expressed or implied, regarding accuracy or correctness. The conditions or methods of handling, storage, use, and
disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons we do not assume responsibility
and expressly disclaim liability of loss, damage, or expense arising from it or in any way connected with the handling, storage, use, or
disposal of the product.
|