May 2008                                                                                                                  Page 1 of 2

                                               MATERIAL SAFETY DATA SHEET

  MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200 AND SUPERFUND

           AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC LAW 99-499. STANDARD

                          SHOULD BE CONSULTED FOR SPECIFIC REQUIREMENTS.



                                                 SECTION I (IDENTIFICATION)

MANUFACTURER/                EUTECTIC CORPORATION                                                 TELEPHONE NUMBER:

SUPPLIERS NAME:              N94 W14355 Garwin Mace Drive                                             1-800-558-8524

                             Menomonee Falls, WI 53051 USA



PRODUCT NAME:                              ABRACOR NO BOND



PRODUCT CLASSIFICATION:                     E + C Composite



                                SECTION II (HAZARDOUS INGREDIENTS/IDENTITY INFORMATION)

IMPORTANT: This section covers the materials from which these products are manufactured. The term "Hazardous" in "Hazardous

Ingredients" should not be interpreted as a term required and defined in OSHA Hazard Communication Standard (29 CFR Part 1910.1200).

The chemicals or compounds, if any, subject to reporting under Title III, in Section 313, of the Superfund Amendments and Reauthorization

Act (SARA) are marked by the symbol #.



WARNING: This product contains or produces a chemical known to the State of California to cause birth defects (or other reproductive

harm) and cancer. (California Health & Safety Code 25249.5 et seq.)



                                        Exposure Limit (mg/m3)

                          CAS

INGREDIENTS            NUMBER         OSHA PEL     ACGIH-TLV                     Percent Ingredients by Weight

Water                  7732-18-5      Not Listed    Not Listed                              85 � 95

Trisodium Phosphate    10101-89-0     Not Listed    Not Listed                                1�5

Sodium Sulphate        7757-82-6      Not Listed    Not Listed                                1�5

Glycerin                 56-81-5          5              10                                 0.2 � 1.5

Fragrances             Not Listed         --             --                                 0.2 � 1.5





                                                   SECTION III (PHYSICAL DATA)

                                                   Form: Yellow perfumed gel.



                                     SECTION IV (FIRE AND EXPLOSION HAZARD DATA)

Non-Flammable.     Unusual Fire & Explosion Hazards: None.

Rating under National Fire Protection 704: Health, 1; Flammability, 0; Reactivity, 0.



                                    SECTION V (REACTIVITY DATA)

STABILITY: Stable INCOMPATIBILITY (materials to avoid): Strong oxidizing agents and molten active metals.

HAZARDOUS POLYMERIZATION: Will not occur. DECOMPOSITION PRODUCTS: May liberate carbon dioxide, carbon

monoxide, and oxides of sodium.



                                           SECTION VI (HEALTH HAZARD DATA)



Effects of Exposure:

PRIMARY ROUTES OF ENTRY are the respiratory system, eyes, and/or skin.

PREEXISTING respiratory or allergic conditions may be aggravated in some individuals.



SHORT TERM (ACUTE) OVEREXPOSURE:

     INGESTION: may cause irritation.

     INHALATION: may cause irritation.

     SKIN CONTACT: may lead to drying, irritation, and dermatitis.

     EYE CONTACT: causes burning and irritation.

MSDS: ABRACOR NO BOND                                                                                                          Page 2 of 2







LONG TERM (CHRONIC) OVEREXPOSURE:

PRIMARY ROUTE OF ENTRY is the respiratory system and skin contact. Nothing reported on long term overexposure.



EMERGENCY & FIRST AID PROCEDURES:

Call for medical aid. Employ first aid techniques recommended by The American Red Cross.

SWALLOWING: Call a physician. Advise of Section II ingredients.

SKIN: Wash thoroughly with water to remove all residue. If a rash develops, call a physician.

INHALATION: Remove to fresh air. See a physician if persistent feeling of discomfort is experienced.

EYES: Flush with water for at least 15 minutes to remove all residue. Get medical attention immediately.







              SECTION VII (PRECAUTION FOR SAFE HANDLING AND USE/APPLICABLE CONTROL MEASURES)



Read and understand the manufacturer's instructions and precautionary label on this product.

Handling: Avoid repeated contact with skin.

Personal Protection: Wear protective gloves and eye protection when using this product.

Ventilation: Use enough ventilation and/or local exhaust to keep the dust below the TLV's in the workers breathing zone and the general

area. Wear a respirator in areas of inadequate ventilation. Monitor fume levels and do not exceed permissible exposure limits or values.

Waste: Dispose of waste residues in accordance with EPA or local regulations.

Storage: Store in original container and at ambient temperatures. Keep out of the reach of children.

Accidental Release: Wear personal protective equipment. Keep large amounts from entering the sewer, storm drains, surface waters, and

soil.

Transportation: Not subject to classification.





The information in this MSDS was obtained from sources we believe are reliable. However, this information is provided without any

representation or warranty, expressed or implied, regarding accuracy or correctness. The conditions or methods of handling, storage, use, and

disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons we do not assume responsibility

and expressly disclaim liability of loss, damage, or expense arising from it or in any way connected with the handling, storage, use, or

disposal of the product.