MATERIAL SAFETY DATA SHEET
I - PRODUCT IDENTIFICATION
Product: Clarifier, Super clarifier
Chemical Family:
Formula:
CAS Number: 42751-79-1, 26062-79-3
Synonyms:
COMPANY IDENTIFICATION 24 HR EMERGENCY TELEPHONE NUMBER
AllChem Performance Products INFOTRAC (Transportation): (800)535-5053
6010 NW First Place
Gainesville, FL 32607
Tel:352-378-9696
II 鈥? COMPOSITION, INFORMATION ON INGREDIENTS
Exposure Limits
Chemical or Common Name: OSHA PEL: ACGIH TLV:
Proprietary Polyquaternary Amine blend N/A N/A
[42751-79-1] 40.0-41.0%
[26062-79-3]
Product is non-hazardous
III 鈥? HAZARDS IDENTIFICATION
Primary Route(s) of Entry:
Ingestion: ()
Inhalation: ()
Skin Contact: (X)
Eye Contact: ()
Primary Health Hazards (Acute and Chronic): Clarifier raw materials are not listed in
NIOSH's Registry of Toxic Effects (Section 1981-2). No known toxicity
information is available.
Carcinogenity Listings: No data available
OSHA: ()
NTP: ()
IARC: ()
Signs & Symptoms of Exposure:
Ingestion: Clarifier is not expected to be harmful by ingestion. This product is NSF
Approved for potable water applications.
Inhalation: No known adverse effects
Skin Contact: Prolonged skin contact may cause irritation.
1
Eye Contact: Prolonged eye contact may cause irritation.
Medical Conditions Aggravated by Exposure: Sensitive skin and eyes
IV 鈥? FIRST AID MEASURES
Emergency and First Aid Procedures:
Ingestion: If swallowed, do not induce vomiting. Give victim a glass of water.
Consult a physician.
Inhalation: Not expected to be harmful. Remove patient to fresh air environment.
Skin Contact: Immediately flush with soap and water for at least 15 minutes.
Eye Contact: Flush with water for at least 15 minutes with eyelids open. Consult a
physician.
V 鈥? FIRE FIGHTING MEASURES
FIRE AND EXPLOSION HAZARD DATA
Flash Point (SFCC): 200掳F
Flammable Limits:
LEL: N/A
UEL: N/A
Extinguishing Media: Carbon dioxide, dry chemicals
Special Fire-fighting Procedures: A self-contained breathing apparatus should be worn by
fire fighting personnel
Unusual Fire and Explosion Hazards: None
VI 鈥? ACCIDENTAL RELEASE MEASURES
Steps to Be Taken In Case Material Is Spilled or Released: Avoid runoff into storm
sewers and surface waterways. Dike and absorb spill with inert materials such as
sand or sweeping compound. Dispose of waste material in accordance with
federal, state, local or other applicable laws and regulations. Empty container
should not be reused until commercially cleaned.
VII 鈥? HANDLING AND STORAGE
Precautions to Be Taken in Handling and Storage: Keep container closed when not in
use. Do not allow freezing.
Other Precautions: The information in this Material Safety Date Sheet reflects the latest
information and data that is available concerning the hazards, application, and
handling of this product under the recommended conditions of use. Any use or
method of application, which is not described in the Product data sheet or this
MSDS, is the responsibility of the user.
VIII 鈥? EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Protection: None required when ventilation is acceptable.
2
Ventilation:
Local Exhaust: Work area should be well ventilated.
Special: None required
Mechanical Exhaust: No special requirements.
Other Protective Clothing or Equipment: Impervious rubber gloves, chemical
splash goggles,
Eye wash fountains and safety showers are recommended.
Work/ Hygienic Practices: Eye wash fountains and safety showers in the work area are
strongly recommended.
IX - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: 100掳C (212掳F)
Vapor Pressure (mm Hg): N/A
Vapor Density (Air=1): N/A
Solubility in Water: Completely soluble
Appearance and odor: Clear, light amber-colored liquid; Characteristic odor
Specific Gravity (H2O=1): 1.08 +/- 0.01
Percent volatile by volume:
Melting Point: -5掳C
Evaporation Rate: N/A
Viscosity: 8000-13,000 cps
pH (neat): 5.0 鈥? 7.0
X 鈥? STABILITY AND REACTIVITY
Stability: () Unstable (X) Stable
Conditions to Avoid: None
Incompatibility: Strong oxidizers, iron, mild steel, copper, copper alloys, or aluminum
Hazardous Decomposition or By-Products: Oxides of nitrogen, carbon dioxide and/or
carbon monoxide, and hydrogen chloride may be formed in a fire.
Hazardous Polymerization: () May Occur (X) Will Not Occur
Hazardous Polymerization Products: None identified
XI - TOXICOLOGICAL INFORMATION
Acute Toxicity:
Target Organ Toxicity:
Reproductive and Development Toxicity:
Carcinogenicity:
Mutagenicity:
XII 鈥? ECOLOGICAL INFORMATION
Aquatic Toxicity:
3
Avian Toxicity:
ENVIRONMENTAL HAZARDS (PR Notice 93-10)
This product is toxic to fish and aquatic organisms. Do not contaminate water by cleaning
of equipment or disposal of wastes. Do not discharge effluent containing this product into
lakes, streams, ponds, estuaries, oceans, or other waters unless in accordance with the
requirements of a National Pollutant Discharge Elimination System (NPDES) permit and
the permitting authority has been notified in writing prior to discharge. Do not discharge
effluent containing this product to sewer systems without previously notifying the local
sewage treatment plant authority. For guidance, contact your State Water board or
Regional Office of the EPA.
XIII 鈥? DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of in approved landfill according to federal, state, and
local regulations.
XIV - TRANSPORTATION DATA
U.S. Department of Transportation - 49 CFR
Not regulated
Proper Shipping Name:
Hazard Class/Division Number:
ID Number:
Packing Group:
Label Required:
Placard Required:
Marine Pollutant:
International Maritime Organization - IMDG
Proper Shipping Name:
Hazard Class/Division Number:
ID Number:
Packing Group:
Label Required:
Placard Required:
Marine Pollutant:
4
XV - REGULATORY INFORMATION
SARA Title III:
TSCA:
XVI - ADDITIONAL INFORMATION
This MSDS replaces the 05/15/2002 version. Any changes in information are as follows:
In Section I - 24 hr emergency telephone number
ALWAYS COMPLY WITH ALL APPLICABLE INTERNATIONAL, FEDERAL,
STATE AND LOCAL REGULATIONS REGARDING THE TRANSPORTATION,
STORAGE, USE AND DISPOSAL OF THIS CHEMICAL.
Due to the changing nature of regulatory requirements, the REGULATORY
INFORMATION listed in Section XV of this document should NOT be considered all-
inclusive or authoritative. International, Federal, State and Local regulations should be
consulted to determine compliance with all required reporting requirements.
The information in this MSDS was obtained from sources, which we believe are reliable.
HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY WARRANTY,
EXPRESS OR IMPLIED, REGARDING ITS CORRECTNESS. The conditions or
methods of handling, storage, use, and disposal of the product are beyond our control and
may be beyond our knowledge. FOR THIS AND OTHER REASONS, WE DO NOT
ASSUME RESPONSIBILITY AND EXPRESSLY DISCLAIM LIABILITY FOR
LOSS, DAMAGE OR EXPENSE ARISING OUT OF OR IN ANY WAY
CONNECTED WITH THE HANDLING, STORAGE, USE OR DISPOSAL OF
THE PRODUCT. This MSDS was prepared and is to be used only for this product. If
the product is used as a component in another product, this MSDS information may not
be applicable.
Issue Date: 05/15/2002
Ref No: 061AAK
Revision Date: 07/13/2005
Revision No: 1
5
|