3M MATERIAL SAFETY DATA SHEET SCOTCH-BRITE(TM) QUICK CLEAN GRIDDLE LIQUID (NO. 700 AND NO. 701)
09/22/2006
Material Safety Data Sheet
Copyright, 2006, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: SCOTCH-BRITE(TM) QUICK CLEAN GRIDDLE LIQUID (NO. 700 AND NO. 701)
MANUFACTURER: 3M
DIVISION: Food Services Trade Department
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 09/22/2006
Supercedes Date: 02/24/2006
Document Group: 09-2779-8
Product Use:
Specific Use: Cleaning of griddles/grills in restaurants.
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
GLYCERIN 56-81-5 40 - 70
WATER 7732-18-5 10 - 30
POTASSIUM CARBONATE 584-08-7 7 - 13
SODIUM CARBONATE 497-19-8 1- 5
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: Clear yellow-orange color with a mild odor
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause target organ effects.
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing.
_________________________________________________________________________________________________
Page 1 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-BRITE(TM) QUICK CLEAN GRIDDLE LIQUID (NO. 700 AND NO. 701)
09/22/2006
Skin Contact:
Contact with the skin during product use is not expected to result in significant irritation.
Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and
throat pain.
Prolonged or repeated exposure may cause:
Respiratory Effects: Signs/symptoms may include cough, shortness of breath, chest tightness, wheezing, increased heart rate,
bluish colored skin (cyanosis), sputum production, changes in lung function tests, and/or respiratory failure.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Wash affected area with soap and water. If signs/symptoms develop, get medical attention.
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never
give anything by mouth to an unconscious person. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
698 潞F [Details: CONDITIONS: For glycerin only (NFPA,
Autoignition temperature
11th ed.)]
Not Applicable
Flash Point
Class IIIB Combustible Liquid
OSHA Flammability Classification:
5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).
_________________________________________________________________________________________________
Page 2 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-BRITE(TM) QUICK CLEAN GRIDDLE LIQUID (NO. 700 AND NO. 701)
09/22/2006
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA).
Unusual Fire and Explosion Hazards: Non-flammable: ordinary combustible material.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Ventilate the area with fresh air. Contain spill. Working from around the edges of
the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient
absorbent until it appears dry. Collect as much of the spilled material as possible. Clean up residue with detergent and water. Place
in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Keep out of the reach of children. Avoid breathing of vapors, mists or spray. Avoid eye contact with vapors, mists, or spray. Do not
eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
7.2 STORAGE
Keep container in well-ventilated area. Store away from acids.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Provide appropriate local exhaust when product is heated.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields.
8.2.2 Skin Protection
Gloves are not required. Avoid skin contact with hot material.
Wear appropriate gloves when handling hot material to prevent thermal burns.
8.2.3 Respiratory Protection
Avoid breathing of vapors, mists or spray. Under normal use conditions, airborne exposures are not expected to be significant enough
to require respiratory protection.
_________________________________________________________________________________________________
Page 3 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-BRITE(TM) QUICK CLEAN GRIDDLE LIQUID (NO. 700 AND NO. 701)
09/22/2006
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
GLYCERIN ACGIH TWA, as mist 10 mg/m3
GLYCERIN OSHA TWA, as mist, 5 mg/m3 Table Z-1
respirable
GLYCERIN OSHA TWA, Vacated, as 10 mg/m3
mist, total dust
GLYCERIN OSHA TWA, as mist, total 15 mg/m3 Table Z-1
dust
VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check with your local
regulatory agency.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Clear yellow-orange color with a mild odor
Odor, Color, Grade:
Liquid
General Physical Form:
698 潞F [Details: CONDITIONS: For glycerin only (NFPA, 11th
Autoignition temperature
ed.)]
Not Applicable
Flash Point
Approximately 248 潞F
Boiling point
1.3 g/ml [Ref Std: WATER=1]
Density
Approximately 1.3 [Ref Std: WATER=1]
Specific Gravity
Approximately 12
pH
Complete
Solubility in Water
0
Hazardous Air Pollutants
0
Volatile Organic Compounds
10 - 30 %
Percent volatile
0
VOC Less H2O & Exempt Solvents
Approximately 200 centipoise
Viscosity
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
_________________________________________________________________________________________________
Page 4 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-BRITE(TM) QUICK CLEAN GRIDDLE LIQUID (NO. 700 AND NO. 701)
09/22/2006
Materials and Conditions to Avoid: Strong acids
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Acrolein During Combustion
Hydrocarbons During Combustion
Formaldehyde During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
A 3M Product Environmental Data Sheet (PED) is available.
CHEMICAL FATE INFORMATION
A 3M Product Environmental Data Sheet (PED) is available.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Discharge spent solutions and small quantities (less than 5 gal.(19 L)) to a wastewater treatment system.
As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
ID Number UPC ID Number UPC
70-0709-6375-9 00-48011-26011-7 70-0709-6376-7 00-48011-26012-4
70-0709-8900-2 00-48011-29583-1 70-0709-8976-2 00-48011-29603-1
70-0710-1895-9 00-48011-26012-4 70-0710-6704-8
_________________________________________________________________________________________________
Page 5 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-BRITE(TM) QUICK CLEAN GRIDDLE LIQUID (NO. 700 AND NO. 701)
09/22/2006
70-0711-2704-0 00-48011-29603-1 70-0711-2705-7 00-48011-26012-4
70-0711-6451-4 00-48011-34998-5
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No
STATE REGULATIONS
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.
The components of this material are in compliance with the new chemical notification requirements for the Korean Existing
Chemicals Inventory.
The components of this product are listed on the Australian Inventory of Chemical Substances.
The components of this product are listed on Japan's Chemical Substance Control Law List (also known as the Existing and New
Chemical Substances List.)
All the components of this product are listed on China's Inventory of Chemical Substances.
The components of this product are in compliance with notification requirements in the Philippines.
The components of this product are listed on the Canadian Domestic Substances List.
INTERNATIONAL REGULATIONS
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
_________________________________________________________________________________________________
Page 6 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-BRITE(TM) QUICK CLEAN GRIDDLE LIQUID (NO. 700 AND NO. 701)
09/22/2006
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 1 Flammability: 1 Reactivity: 0 Special Hazards: None
Acid/Base: Alkaline
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
HMIS Hazard Classification
Health: 1 Flammability: 1 Reactivity: 0 Protection: X - See PPE section.
Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the workplace. These
ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency
situations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of the National Paint and
Coatings Association (NPCA).
Revision Changes: Not Applicable
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
3M MSDSs are available at www.3M.com
_________________________________________________________________________________________________
Page 7 of 7
|