NOVAPOL polyethylene
庐
HDPE
Product Data Sheet
Pipe Extrusion Resin
HP-Y353-A
Melt Index 0.30 ASTM (1) Typical Values(2)
Properties Units
D 1238 g/10 min 0.30
Melt Index(3)
Density 0.953
3
D 792 g/cm 0.953
Density
D 638 MPa (psi) 27 (3 915)
Tensile Strength @ Yield(4)
D 638 % > 900
Ultimate Elongation(4)
Features
D 3350 MPa (psi) 1 035 (150 000)
Secant Flexural Modulus @ 2% Strain
鈥? Good ESCR
D 2240 -- 65
Hardness, Shore D
鈥? Excellent toughness
D 1693 h > 75
F0(5)
ESCR,
鈥? High strength
Single Point Notched Constant Tensile
鈥? Excellent processability
D 5397 h > 24
Load(7)
鈥? Excellent stiffness
D 1525 掳C (掳F) 126 (259)
Vicat Softening Point
D 3417 掳C (掳F) 132 (269)
Melting Point
Additives
D 3350 掳C (掳F) 264 (507)
Thermal Stability
鈥? Antioxidants and processing
stabilizers D 746 掳C (掳F) < -70 (< -130)
Brittleness Temperature
1.4x10-4 (0.8x10-4)
D 696 cm/cm/掳C (in/in/掳F)
Coefficient of Linear Thermal Expansion
Applications
(1) Properties designated have been determined using methods which are in accordance with or substantially in accordance with the
鈥? For profile, corrugated non-
specified testing standards.
pressure pipes (2) Typical Values represent average laboratory values and are intended as guides only, not as specifications.
(3) Condition 190掳C/2.16 kg.
鈥? For storm and sanitary sewer
(4) Extension rate 2 inches/minute.
pipe
(5) Environmental stress crack resistance, Condition C, 100% Igepal.
鈥? For culvert and conduit (6) 1 in. nominal diameter laboratory pipe SDR13.5.
application (7) 15% of yield stress.
Product Data Sheet Pipe Extrusion Resin
NOVAPOL
HP-Y353-A鈥擧DPE
Availability Processing Conditions
NOVAPOL polyethylene resins are available The recommended melt temperature to obtain the
in bulk hopper cars, hopper trucks, boxes, sea best properties from HP-Y353-A is 175-220掳C
bulk containers or bags. The product type and (350-428掳F); processing conditions, particularly
batch number are clearly marked on each output rate, should be set for each pipe extruder
www.novachemicals.com
container. Contact the NOVA Chemicals sales to obtain a minimum thermal stability of about
office nearest you for availability in your area. 240掳C (460掳F) on the extruded pipe. U.S. Operating Center
NOVA Chemicals Inc.
Comprehensive assistance with processing
1550 Coraopolis Heights Road
conditions and technology is available from NOVA
Storage/Handling Moon Township, PA 15108
Chemicals Technical Service at (403) 291-8444. United States of America
HP-Y353-A should be stored in a clean, dry place
at ambient temperatures. Prolonged or improper Phone 412.490.4000
Toll Free 800.222.7213
storage can result in deterioration of product Food Packaging Status
Fax 412.494.4861
properties. Care should be taken when handling Please contact NOVA Chemicals Technical Service
and transferring product to prevent foreign matter for information on the use of this resin in the Headquarters
contamination. The NOVA Chemicals Material packaging of specific foodstuffs. NOVA Chemicals Corporation
1000 Seventh Avenue S.W.
Safety Data Sheet (MSDS) contains important
P.O. Box 2518, Station M
safety information and should be reviewed before Environmental Calgary, Alberta
using the product. Canada T2P 5C6
NOVA Chemicals鈥? polyethylene resins are
biologically and chemically inert, but improper Phone 403.750.3600
Fax 403.269.7410
disposal may present an ingestion hazard to
Product Standards
wildlife. Where recycling of NOVA Chemicals鈥?
HP-Y353-A complies with ASTM D1248 as a Type Technical Center
polyethylene resins is not possible, disposal to
III, Class A, Category 5, Grade P34 material and NOVA Chemicals
landfill or incineration in accordance with all Technical Center
with ASTM D3350 as a 335520A cell class
3620 鈥? 32 Street N.E.
applicable government laws and regulations is
material. Calgary, Alberta
recommended. Please contact NOVA Chemicals Canada T1Y 6G7
HP-Y353-A complies with the material Technical Service for further information on
Phone 403.291.8444
requirements specified by AASHTO M294-01, recycling and disposal of NOVA Chemicals resins. Fax 403.291.0493
M252, and MP7.
European
When mixed with a carbon black masterbatch, is the SPI resin code developed for high Operating Center
HP-Y353-A Black complies with ASTM D1248 as density polyethylene to identify material type for NOVA Chemicals
a Type III, Class C, Category 5, Grade P34 material (International) S.A.
sorting and recycling purposes.
Avenue de la Gare 14
and with ASTM D3350, as a 335520C cell class
1700 Fribourg
material. Switzerland
HP-Y353-A Black meets the Canadian Standards Phone 41.26.426.57.57
Fax 41.26.426.57.70
Association CAN/CSA-B182.8 for use in profile
polyethylene storm sewer and drainage pipe.
is a registered trademark of NOVA Brands Ltd; authorized use.
NOVAPOL庐 is a registered trademark of NOVA Brands Ltd.; authorized use/utilisation autoris茅e.
The above information is provided in good faith without warranty, representation, inducement or license of any kind. No freedom from infringement of
any patent owned by NOVA Chemicals or others is to be inferred. NOVA Chemicals is not responsible for any processing or compounding which may
occur to produce finished articles, packaging materials or their components. Further, NOVA CHEMICALS MAKES NO WARRANTY OR
REPRESENTATION OF ANY KIND, REGARDING THE INFORMATION GIVEN OR THE PRODUCTS DESCRIBED, AND EXPRESSLY DISCLAIMS ALL
IMPLIED WARRANTIES, REPRESENTATIONS AND CONDITIONS, INCLUDING WITHOUT LIMITATION ALL WARRANTIES AND CONDITIONS OF
QUALITY, MERCHANTABILITY AND SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Responsibility for use, storage, handling and
disposal of the products described herein is that of the purchaser or end user.
June 26, 2008 HP-Y353-A
|