MATERIAL SAFETY DATA SHEET
Conductive Resin
1. PRODUCT AND COMPANY IDENTIFICATION
CONDUCTIVE RESIN
Product Name
Raw material used in production of grounding pads.
Use/Size
881140
Product Numbers
Tyco Healthcare/ Kendall
Manufacturer/Supplier
15 Hampshire Street
Address
Mansfield, MA 02048
(508) 261-8000 (Monday 鈥? Friday 8:00 am to 5:00 pm)
Phone Number
(800) 424-9300
Chemtrec Number
January 30, 2004
Revision Date:
September 22, 2000
MSDS Date:
This MSDS has been compiled in accordance with - EC Directive 91/155/EC - OSHA's Hazcom Standard (29 CFR 1910.1200)
2. COMPOSITION/INFORMATION ON THE COMPONENTS
Component Name CAS#/Codes Concentration R Phrases Classification
Oxyalkylene Polymer Proprietary 15.00-30.00% R-None None
Polymer Proprietary 15.00-20.00% R-None None
Dye compound Proprietary < 1.00% R-None None
Water 7732-18-5 50.00-60.00% R-None None
231-791-2
Inorganic Salt Proprietary > 5.00% R-None None
3. HAZARD IDENTIFICATION
EU Main Hazards
Not classified as hazardous.
Routes of Entry
- Eye contact - Skin contact
Carcinogenic Status
Not considered carcinogenic by NTP, IARC, and OSHA.
Target Organs
- Eye - Skin
Health Effects - Eyes
Contact may cause slight transient irritation.
Health Effects - Skin
Material may cause slight irritation on prolonged or repeated contact.
Health Effects - Ingestion
Swallowing may have the following effects:
- gastrointestinal irritation - nausea - vomiting
Health Effects - Inhalation
No adverse effects are expected during normal conditions of use.
Page 1 of 6
Revision Date: January 30, 2004
MATERIAL SAFETY DATA SHEET
Conductive Resin
4. FIRST AID MEASURES
Eyes
Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open. Obtain
medical attention if soreness or redness persists.
Skin
Wash skin thoroughly with soap and water. Continue washing for at least 15 minutes. Remove
contaminated clothing as washing proceeds. Obtain medical attention if blistering occurs or redness
persists.
Ingestion
Induce vomiting. If vomiting occurs naturally, lean victim forward to reduce risk of aspiration. Repeat
administration of water. Never administer anything by mouth if a victim is losing consciousness, is
unconscious or is convulsing.
Inhalation
If there is difficulty in breathing, give oxygen. Seek medical attention if symptoms persist.
Advice to Physicians
Treat symptomatically.
5. FIRE FIGHTING MEASURES
Extinguishing Media
Not Flammable. Select extinguishing agent appropriate to other materials involved.
Unusual Fire and Explosion Hazards
This product may give rise to hazardous fumes in a fire.
Protective Equipment for Fire-Fighting
Wear full protective clothing and self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Contain and absorb using earth, sand or other inert material. Transfer into suitable containers for
recovery or disposal. Material can create slippery conditions underfoot. Prevent the material from
entering drains or watercourses.
7. HANDLING AND STORAGE
Keep container tightly closed when not in use. Storage area should be: - cool - dry - well ventilated
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Standards
Exposure limits are listed below, if they exist.
Oxyalkylene Polymer
None assigned.
Polymer
None assigned.
Dye compound
None assigned.
Page 2 of 6
Revision Date: January 30, 2004
MATERIAL SAFETY DATA SHEET
Conductive Resin
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Inorganic Salt
None assigned.
Engineering Control Measures
Good general room ventilation is expected to be adequate to control airborne levels.
Respiratory Protection
Respiratory protection not normally required.
Hand Protection
Chemical resistant gloves
Eye Protection
Chemical goggles or safety glasses with side shields
Body Protection
Normal work wear.
9. PHYSICAL AND CHEMICAL PROPERTIES
Viscous liquid
Physical State
Blue
Color
Slight
Odor
No data.
pH
No data.
Specific Gravity
No data.
Boiling Range/Point (掳C/F)
No data.
Melting Point (掳C/F)
Not Flammable
Flash Point (PMCC) (掳C/F)
No data.
Explosion Limits (%)
No data.
Vapor Pressure
No data.
Density
Completely soluble
Solubility in Water
No data.
Vapor Density (Air = 1)
No data.
Viscosity (cSt)
<1.0
VOC (g/l)
10. STABILITY AND REACTIVITY
Stability
Stable under normal conditions.
Conditions to Avoid
- Heat - High temperatures
Materials to Avoid
- Strong oxidizing agents - Acids - Alkalis
Hazardous Polymerization
Will not occur.
Hazardous Decomposition Products
- oxides of carbon - oxides of nitrogen - hydrogen cyanide - magnesium oxides
Page 3 of 6
Revision Date: January 30, 2004
MATERIAL SAFETY DATA SHEET
Conductive Resin
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Low order of acute toxicity.
(Inorganic Salt) Oral LD50 (rat): 8610 mg/kg.
(Dye Compound) Oral LD50 (rat): > 10,000 mg/kg.
Chronic Toxicity/Carcinogenicity
This product is not expected to cause long term adverse health effects.
Genotoxicity
This product is not expected to cause any mutagenic effects.
Reproductive/Developmental Toxicity
This product is not expected to cause reproductive or developmental health effects.
12. ECOLOGICAL INFORMATION
Mobility
No relevant studies identified.
Persistence/Degradability
No relevant studies identified.
Bio-accumulation
No relevant studies identified.
Ecotoxicity
(Polymer)
Tests on the following species gave a 96 h LC50 of greater than 10000 mg/litre: - Golden Orfe
(Oxyalkylene Polymer)
Tests on the following species gave a 48 h LC50 of greater than 10000 mg/litre: - daphnia
13. DISPOSAL
Dispose of in accordance with all applicable local and national regulations.
14. TRANSPORT INFORMATION
Not Regulated
DOT CFR 172.101 Data
Not Regulated
UN Proper Shipping Name
None.
UN Class
None.
UN Number
None.
UN Packaging Group
Consult current IATA Regulations prior to shipping by air.
Classification for AIR
Transportation (IATA)
15. REGULATORY INFORMATION
EU Label Information
Classification and labelling have been performed according to EU directives 67/548/EEC and
99/45/EC including amendments.
Page 4 of 6
Revision Date: January 30, 2004
MATERIAL SAFETY DATA SHEET
Conductive Resin
15. REGULATORY INFORMATION
EU Hazard Symbol and Indication of Danger
According to EC Commission Directive 67/548/EEC this product is not classified.
R phrases
None.
S phrases
None.
US REGULATIONS (Federal, State) and INTERNATIONAL CHEMICAL REGISTRATION LAWS
TSCA Listing
This product contains ingredients that are listed on or exempt from listing on the EPA Toxic Substance
Control Act Chemical Inventory.
EINECS Listing
All ingredients in this product are listed on the European Inventory of Existing Commercial Chemical
Substances (EINECS) or are exempt from listing.
DSL (Canadian) Listing
All ingredients in this product are listed on the Domestic Substance List (DSL).
MA Right To Know Law
This product does not contain any chemicals listed on the Massachusetts Right To Know Substance
List.
PA Right To Know Law
This product does not contain any chemicals on the Pennsylvania Hazardous Substance List.
NJ Right To Know Law
This product does not contain any chemicals on the New Jersey Workplace Hazardous Substance
List.
California Proposition 65
This product contains the following chemicals that have been found by the State of California to cause
cancer, birth defects or other reproductive harm:
- Ethylene Oxide (trace) - Formaldehyde (trace) - 1,4 Dioxane (trace) - Acetaldehyde (trace)
SARA Title III Sect. 302 (EHS)
This product does not contain any chemicals subject to SARA Title III Section 302.
SARA Title III Sect. 304
This product does not contain any chemicals subject to SARA Title III Section 304.
SARA Title III Sect. 311/312 Categorization
Immediate (Acute) Health Hazard
SARA Title III Sect. 313
This product does not contain a chemical which is listed in Section 313 at or above de minimis
concentrations.
16. OTHER INFORMATION
NFPA Ratings
NFPA Code for Flammability - 0
NFPA Code for Health - 1
NFPA Code for Reactivity - 0
NFPA Code for Special Hazards - 0
Page 5 of 6
Revision Date: January 30, 2004
MATERIAL SAFETY DATA SHEET
Conductive Resin
16. OTHER INFORMATION
HMIS Ratings
HMIS Code for Flammability - 0
HMIS Code for Health - 1
HMIS Code for Reactivity - 0
HMIS Code for Personal Protection - See Section 8
Abbreviations
N/A: Denotes no applicable information found or available
CAS#: Chemical Abstracts Service Number
ACGIH: American Conference of Governmental Industrial Hygienists
OSHA: Occupational Safety and Health Administration
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
STEL: Short Term Exposure Limit
NTP: National Toxicology Program
IARC: International Agency for Research on Cancer
EU: European Union
R: Risk
S: Safety
LC50: Lethal Concentration 50%
LD50: Lethal Dose 50%
BOD: Biological Oxygen Demand
KoC: Soil Organic Carbon Partition Coefficient
EnviroNet LLC.
Prepared By:
The information and recommendations presented in this MSDS are based on sources believed to be
accurate; therefore, The Kendall Company assumes no liability for the accuracy or completeness of
this information. It is the user's responsibility to determine the suitability of the information for their
particular purposes.
Page 6 of 6
Revision Date: January 30, 2004
|