Material Safety Data Sheet
POWERPLY STANDARD FR T24 ROLL
Version 1.1 Print Date 05/17/2007
REVISION DATE: 05/16/2007
SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION
Product Information
Trade name : POWERPLY STANDARD FR T24 ROLL
Product code : 36STDT24601
Supplier : Tremco Canada division
220 Wicksteed Avenue
Toronto, ON M4H 1G7
Telephone : (416) 421-3300
Emergency Phone: : (613) 996-6666
Product use : Roof Sheeting
Preparation Information
Prepared by: : Sewnauth Raghunandan
Date: : 05/16/2007
Telephone : (416) 421-3300
SECTION 2 - HAZARDS IDENTIFICATION
Emergency Overview
White or black and white. Solid ply rolls. Not applicable under normal conditions of use. Generally not required
under normal conditions of use.
Acute Potential Health Effects/ Routes of Entry
Inhalation Not applicable under normal conditions of use.
:
Eyes Not applicable under normal conditions of use.
:
Ingestion Not applicable under normal conditions of use.
:
Skin May cause mild irritation.
:
Aggravated Medical Conditions
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.
Chronic Health Effects
This product contains granular materials which may cause mechanical skin, eye or respiratory irritation.
Inhalation of crystalline silica (quartz) can cause cancer based on animal data, and IARC concludes sufficient
evidence in humans (Group 1). Prolonged and repeated overexposure to free crystalline silica dust above the
TLV level may cause scarring of the lungs with cough and shortness of breath. A delayed lung injury, silicosis
may result from breathing free silica.
Target Organs: Skin, Eye, Lung
SECTION 3 : HAZARDOUS INGREDIENTS
This is not a controlled product as defined in the Canadian Workplace Hazardous Materials Information System
(WHMIS).
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
1/5 36STDT24601
Material Safety Data Sheet
POWERPLY STANDARD FR T24 ROLL
Version 1.1 Print Date 05/17/2007
REVISION DATE: 05/16/2007
Inhalation : Generally not required under normal conditions of use.
Eye contact : Generally not required under normal conditions of use.
Skin contact : Clean area of contact thoroughly using soap and water. If irritation, rash or other
disorders develop, get medical attention immediately.
Ingestion : Not applicable under normal conditions of use.
Notes to physician : Not applicable.
SECTION 5: FIRE / EXPLOSION HAZARDS
Flash point : Not available.
Method : Not available.
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Hazardous combustion : Hydrogen sulfide and hydrocarbon fractions.
products
Protective equipment for : Use accepted fire fighting techniques. Wear full firefighting protective
firefighters clothing, including self-contained breathing apparatus (SCBA).
SECTION 6 - SPILLS / LEAKS / ACCIDENTAL RELEASE MEASURES
Scrape up and transfer to appropriate container for disposal.
SECTION 7 - HANDLING AND STORAGE
Store under normal warehouse conditions.
SECTION 8 - PREVENTIVE MEASURES/EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protection equipment
Respiratory protection : Not required under normal conditions of use.
Hand protection : Use suitable impervious leather gloves and protective apparel to reduce
exposure.
Eye protection : Wear appropriate eye protection.
Skin and body protection : Not required.
Protective measures : Other equipment not normally required.
Engineering measures : General ventilation is sufficient.
Exposure Limits
2/5 36STDT24601
Material Safety Data Sheet
POWERPLY STANDARD FR T24 ROLL
Version 1.1 Print Date 05/17/2007
REVISION DATE: 05/16/2007
Chemical Name CAS Number Regulation Limit Form
Asphalt 8052-42-4 ACGIH TWA: 0.5 mg/m3 Inhalable fraction.as
benzene solubles
Ontario TWA: 0.5 mg/m3 Inhalable fumeas
benzene solubles
Ontario TWA: 0.5 mg/m3 Inhalable fumeas
benzene solubles
Crystalline Silica (Quartz)/ 14808-60-7 Ontario TWA: 0.10 mg/m3 Respirable fraction.
Silica Sand ACGIH TWA: 0.025 mg/m3 Respirable fraction.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State : Solid
Form : Solid ply rolls
Color : White or black and white
Odor : None
pH : Not available.
Vapour pressure : Not available.
Vapor density : Not available.
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : Not available.
Water solubility : Not available.
Evaporation Rate: : Not available.
Specific Gravity : 1.0
% Volatile Weight : 0%
SECTION 10 - REACTIVITY / STABILITY
Stability : Material is stable under normal storage, handling, and use.
Hazardous polymerization : Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
No Data Available
3/5 36STDT24601
Material Safety Data Sheet
POWERPLY STANDARD FR T24 ROLL
Version 1.1 Print Date 05/17/2007
REVISION DATE: 05/16/2007
SECTION 12 - ECOLOGICAL INFORMATION
No Data Available
SECTION 13 - WASTE DISPOSAL CONSIDERATIONS
Disposal Method : As purchased, this product, when discarded, is not a listed or characteristic hazardous
waste according to Federal regulations (40 CFR 261). Check local, regional, state or
provincial regulations for applicable requirements for disposal. Any processing, using,
alteration or chemical additions to the product, as purchased, may alter the disposal
requirements. Under Federal regulations, it is the generator's responsibility to
determine if a waste is a hazardous waste. Empty containers may retain product
residue. Do not reuse.
SECTION 14 - TRANSPORTATION / SHIPPING DATA
TDG / DOT Shipping Description:
NOT REGULATED
SECTION 15 - REGULATORY INFORMATION
North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.
Canadian Regulations:
WHMIS Classification : Not Controlled
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all of the information required by the CPR.
Other Regulations:
Regulatory VOC (less water and : 0 g/l
exempt solvent)
SECTION 16 - OTHER INFORMATION
HMIS Rating :
Health 1 0 = Minimum
1 = Slight
Flammability 0
2 = Moderate
Reactivity 0
3 = Serious
PPE
4 = Severe
4/5 36STDT24601
Material Safety Data Sheet
POWERPLY STANDARD FR T24 ROLL
Version 1.1 Print Date 05/17/2007
REVISION DATE: 05/16/2007
Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.
Prepared by: Sewnauth Raghunandan
Legend
ACGIH - American Conference of Governmental Hygienists OSHA - Occupational Safety and Health Administration
DOT - Department of Transportation PEL - Permissible Exposure Limit
DSL - Domestic Substance List RCRA - Resource Conservation and Recovery Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
NTP - National Toxicology Program WHMIS - Workplace Hazardous Materials Information System
5/5 36STDT24601
|