The compa
ny that
published
this work
is now
in a joint
venture co
mpany
named Aus
tralian Tu
be Mills.
For techni
cal suppor
t or sale
enquiries
please cont
act
Australian
Tube Mills.
Part 3 鈥? Piping Products Contents
Section Page
Pipe Grade C250L0
3-3
Specifications
3-5
Section Properties
3-7
Mass & Bundling
Notes:
Disclaimer 鈥? Whilst every care has been taken in the preparation
of this information, Smorgon Steel Tube Mills, and its agents accept
no liability for the accuracy of the information supplied. The company
expressly disclaims all and any liability to any person whether a
purchaser of any product, or otherwise in respect of anything done or
omitted to be done and the consequences of anything done or omitted
to be done, by any such person in reliance, whether in whole or in
part upon the whole or any part of this publication.
Product availability & other information 鈥? As the section, grade
and finish of all products are subject to continuous improvement,
reference should be made to the SSTM QUICK REFERENCE PRODUCT
AVAILABILITY GUIDE (QRPAG) for information on the availability
of listed sections and associated finishes. The QRPAG is found
at the beginning of this publication.
Always ensure that you are using current information on the SSTM
product range. This can be verified by comparing the document
version date (noted at the bottom of the page) with the current version
date of each publication. The current version date of the QRPAG,
this and other SSTM publications can be obtained by referring to
www.smorgonsteel.com.au/tubemills or by contacting SSTM.
Smorgon Steel Tube Mills A.B.N. 22 010 469 977. PO Box 246 Sunnybank, Queensland 4109 Australia Telephone +61 7 3246 2600 Facsimile +61 7 3246 2660 E-mail tubemills@smorgonsteel.com.au Internet www.smorgonsteel.com.au/tubemills
DECEMBER 2006 3-1
PART 0 PART 9
PART 1 PART 2 PART 3 PART 4 PART 5 PART 6 PART 7 PART 8
Quick Reference Product Material Safety
General Information Structural Products Piping Products Other Products Steel Grades Mill Finishes Mill Processing Fabrication
Availability Guide Data Sheets (MSDS)
Blank Page
Smorgon Steel Tube Mills A.B.N. 22 010 469 977. PO Box 246 Sunnybank, Queensland 4109 Australia Telephone +61 7 3246 2600 Facsimile +61 7 3246 2660 E-mail tubemills@smorgonsteel.com.au Internet www.smorgonsteel.com.au/tubemills
DECEMBER 2006 3-2
Pipe C250L0 鈥? Specifications
Technical Specifications This primer paint finish is applied in-line using the May exclude some wall thicknesses and finishes.
patented KleenKote庐 process and is supplied in the Contact your Smorgon Steel Tube Mills representative
Australian Standards following coating thicknesses: for further details.
Red & Black ________________Target 12 microns with
_
Pipe Grade C250L0 is manufactured and tested to comply Non-Standard Lengths
________________________ average at 8-10 microns
with the requirements of the following specifications:
Special orders of non-standard pack lengths of 1 1
Pipe Pipe
Note: Non-standard finishes, such as NoKote, are
AS 1074 鈥? Steel tubes and tubulars for 2 2
C250L0 C250L0
Pipe Grade C250L0 are available (conditions apply).
available if ordered prior to rollings. Conditions apply.
ordinary service. 3 3
KleenKote庐 HotDipGal
Check with your distributor for details.
Refer to manufacturer for details.
AS 1163 鈥? Structural steel hollow sections
Minimum Length:
See Quick Reference Product Availability Guide (Part 0)
(Grade C250L0).
(DN 20 鈥? DN 100) KleenKote庐 _______________ 4.2 m
General Description
for further information on availability.
AS/NZS 4792 鈥? Hot-dip galvanized (zinc) coatings
(DN 125 鈥? DN 150) KleenKote庐 ______________ 5.3 m
on ferrous hollow sections, applied by a continuous HotDipGal Finish Manufacturing Process
(DN 20 鈥? DN 100) HotDipGal ________________ 5.0 m
or a specialized process (Section 2).
Pipe Grade C250L0, for general mechanical and
Galvanized (Hot-dip)
(DN 125 鈥? DN 150) HotDipGal _______________ 5.3 m
Mechanical Properties Pipe Grade C250L0 with HotDipGal finish is low pressure reticulation and structural applications,
Maximum Length:
galvanized and tested to meet the requirements
Pipe Grade C250L0 has the following is manufactured by cold-forming and high frequency
(DN 20 鈥? DN 40) KleenKote庐_________________ 8.0 m
of Section 2 of AS/NZS 4792.
mechanical properties: Electric Resistance Welding (ERW) of steel strip. The
(DN 50 鈥? DN 100) KleenKote庐 ______________ 12.0 m cold-forming process enhances the strength, hardness
Minimum coating mass _________ 300 g/m2 each side
250 MPa
Minimum Yield Strength __________________
(DN 80 鈥? DN 150) KleenKote庐 ______________ 13.0 m and surface finish of the pipe and produces product
Minimum Tensile Strength _______________ 320 MPa The coating adherence of the galvanizing is satisfactory for
_
to tight dimensional tolerances.
(DN 20 鈥? DN 100) HotDipGal ________________ 7.2 m
the pipe to be bent to a radius 6 times the diameter of the
Minimum Elongation in 5.65鈭歋o _______________ 22%
(DN 125 鈥? DN 150) HotDipGal ______________ 12.0 m
Further Information
pipe up to 60.3mm OD in accordance with AS/NZS 4792.
L0 __ guaranteed impact properties at 0掳C to AS 1163
_
Note: Contact your Smorgon Steel Tube Mills
See Quick Reference Product Availability Guide (Part 0)
Tolerances For further information refer to the Smorgon Steel Tube Mills:
representative for lengths outside this range.
for further information on availability.
Product Solutions Guide.
Tolerances for Pipe Grade C250L0 are compliant
Thickness
End Finish (Mill Processing)
with AS 1163 and AS 1074.
Pipe Grade C250L0 are available in medium (M)
See Dimensional Tolerances in Part 1 for more information. Plain and Threaded Ends.
and heavy (H) wall thickness. These thicknesses are
Please refer to Mill Processing (Part 7) of this
identified by the following end colour codes:
Product Manual for end finish availability.
Supply Conditions Medium (M) ________________________________ Blue
Standard Lengths
KleenKote庐 Finish Heavy (H) _________________________________ Red
_
Standard length for Pipe Grade C250L0:
Note: Extra heavy (XH) Pipe is available in some sizes.
Pipe Grade C250L0 with KleenKote庐 finish is supplied
(DN 15* 鈥? DN 150 CHS) KleenKote庐/HotDipGal _ 6.5 m See Structural CHS Grade C250L0 for further information.
in the following surface colours:
Grade C250L0 Extra Heavy Pipe is available on request.
Red Black
*Note: DN 15 conforms to PTMA 9701. DN stands for
Nominal Size and replaces NB (Nominal Bore).
Smorgon Steel Tube Mills A.B.N. 22 010 469 977. PO Box 246 Sunnybank, Queensland 4109 Australia Telephone +61 7 3246 2600 Facsimile +61 7 3246 2660 E-mail tubemills@smorgonsteel.com.au Internet www.smorgonsteel.com.au/tubemills
DECEMBER 2006 3-3
PART 0 PART 9
PART 1 PART 2 PART 3 PART 4 PART 5 PART 6 PART 7 PART 8
Quick Reference Product Material Safety
General Information Structural Products Piping Products Other Products Steel Grades Mill Finishes Mill Processing Fabrication
Availability Guide Data Sheets (MSDS)
Blank Page
Smorgon Steel Tube Mills A.B.N. 22 010 469 977. PO Box 246 Sunnybank, Queensland 4109 Australia Telephone +61 7 3246 2600 Facsimile +61 7 3246 2660 E-mail tubemills@smorgonsteel.com.au Internet www.smorgonsteel.com.au/tubemills
DECEMBER 2006 3-4
Pipe C250L0 鈥? Section Properties calculated in accordance with AS 1163
Dimensions and Ratios Properties
Gross Torsion Torsion
Designation External Surface Area About any axis
Nominal Section Area Constant Modulus
Mass per m do
size
do t per m per t Ag I Z S r J C
t
10 6 mm4 10 3 mm 3 10 3 mm 3 10 6 mm4 10 3 mm 3
m 2 /m m 2 /t mm 2
mm mm DN kg/m mm
1 1
Pipe Pipe
150 H 21.3 0.519 24.4 30.6 2710 8.65 105 138 56.5 17.3 209
165.1 5.4
x CHS 2 2
C250L0 C250L0
5.0 150 M 19.7 0.519 26.3 33.0 2510 8.07 97.7 128 56.6 16.1 195
CHS 3 3
KleenKote庐 HotDipGal
125 H 17.9 0.439 24.5 25.9 2280 5.14 73.7 97.4 47.5 10.3 147
139.7 5.4
x CHS
5.0 125 M 16.6 0.439 26.4 27.9 2120 4.81 68.8 90.8 47.7 9.61 138
CHS
100 H 14.5 0.359 24.8 21.2 1850 2.75 48.0 64.1 38.5 5.49 96.1
114.3 5.4
x CHS Notes:
4.5 100 M 12.2 0.359 29.5 25.4 1550 2.34 41.0 54.3 38.9 4.69 82.0
CHS 1. M = Medium; H = Heavy.
90 H 11.9 0.319 26.8 20.3 1520 1.77 34.9 46.7 34.2 3.55 69.9
101.6 5.0
x CHS 2. * Conforms to specification PTMA 9701.
4.0 90 M 9.63 0.319 33.2 25.4 1230 1.46 28.8 38.1 34.5 2.93 57.6
CHS
3. Extra Heavy Pipe Grade C250L0 is available in Structural
80 H 10.3 0.279 27.0 17.8 1320 1.16 26.2 35.2 29.7 2.33 52.4
88.9 5.0
x CHS CHS Grade C250L0 which is compliant with AS 1163.
4.0 80 M 8.38 0.279 33.3 22.2 1070 0.963 21.7 28.9 30.0 1.93 43.3
CHS
65 H 7.95 0.239 30.1 16.9 1010 0.651 17.1 23.1 25.4 1.30 34.2
76.1 4.5
x CHS
3.6 65 M 6.44 0.239 37.1 21.1 820 0.540 14.2 18.9 25.7 1.08 28.4
CHS
50 H 6.19 0.189 30.6 13.4 789 0.309 10.2 14.0 19.8 0.618 20.5
60.3 4.5
x CHS
3.6 50 M 5.03 0.189 37.6 16.8 641 0.259 8.58 11.6 20.1 0.517 17.2
CHS
40 H 4.37 0.152 34.7 12.1 557 0.138 5.70 7.87 15.7 0.275 11.4
48.3 4.0
x CHS
3.2 40 M 3.56 0.152 42.6 15.1 453 0.116 4.80 6.52 16.0 0.232 9.59
CHS
32 H 3.79 0.133 35.2 10.6 483 0.0899 4.24 5.92 13.6 0.180 8.48
42.4 4.0
x CHS
3.2 32 M 3.09 0.133 43.1 13.3 394 0.0762 3.59 4.93 13.9 0.152 7.19
CHS
25 H 2.93 0.106 36.1 8.43 373 0.0419 2.49 3.55 10.6 0.0838 4.97
33.7 4.0
x CHS
3.2 25 M 2.41 0.106 44.0 10.5 307 0.0360 2.14 2.99 10.8 0.0721 4.28
CHS
20 H 1.87 0.0845 45.2 8.41 238 0.0170 1.27 1.81 8.46 0.0341 2.53
26.9 3.2
x CHS
2.6 20 M 1.56 0.0845 54.2 10.3 198 0.0148 1.10 1.54 8.64 0.0296 2.20
CHS
15 H 1.43 0.0669 46.8 6.66 182 0.00768 0.722 1.06 6.50 0.0154 1.44
21.3 3.2
x CHS*
2.6 15 M 1.20 0.0669 55.8 8.19 153 0.00681 0.639 0.915 6.68 0.0136 1.28
CHS*
do
t
Smorgon Steel Tube Mills A.B.N. 22 010 469 977. PO Box 246 Sunnybank, Queensland 4109 Australia Telephone +61 7 3246 2600 Facsimile +61 7 3246 2660 E-mail tubemills@smorgonsteel.com.au Internet www.smorgonsteel.com.au/tubemills
DECEMBER 2006 3-5
PART 0 PART 9
PART 1 PART 2 PART 3 PART 4 PART 5 PART 6 PART 7 PART 8
Quick Reference Product Material Safety
General Information Structural Products Piping Products Other Products Steel Grades Mill Finishes Mill Processing Fabrication
Availability Guide Data Sheets (MSDS)
Blank Page
Smorgon Steel Tube Mills A.B.N. 22 010 469 977. PO Box 246 Sunnybank, Queensland 4109 Australia Telephone +61 7 3246 2600 Facsimile +61 7 3246 2660 E-mail tubemills@smorgonsteel.com.au Internet www.smorgonsteel.com.au/tubemills
DECEMBER 2006 3-6
Pipe C250L0 鈥? Mass & Bundling calculated in accordance with AS 1163
Dimensions Bundling Mass
KleenKote庐 HotDipGal
Bundle Dimensions (mm)
Designation Nominal
Lengths Per Bundle Metres Per Bundle Mass Per Bundle Mass Per Bundle
Nominal Nominal
Size
Mass Mass
6.5 8.0 9.0 12.0
dO t tonnes tonnes
1 1
Pipe Pipe
6.5 8.0 9.0 12.0 6.5 8.0 9.0 12.0 kg/m 6.5 8.0 9.0 12.0 kg/m 6.5 8.0 9.0 12.0
mm mm DN Wx H WxH WxH WxH m/t m/t
2 2
C250L0 C250L0
21.3 x 2.6 CHS* 15 M 362 316 217 1410.5 1.20 834 1.69 1.23 810 1.74
- - - - - - - - - - - - - - - 3 3
KleenKote庐 HotDipGal
3.2 CHS* 15 H 362 316 217 1410.5 1.43 700 2.01 1.46 684 2.06
- - - - - - - - - - - - - - -
26.9 x 2.6 CHS 20 M 350 306 127 825.5 1.56 642 1.29 1.60 624 1.32
- - - - - - - - - - - - - - -
3.2 CHS 20 H 350 306 127 825.5 1.87 535 1.54 1.92 522 1.58
- - - - - - - - - - - - - - - Notes:
33.7 x 3.2 CHS 25 M 371 326 91 591.5 2.41 415 1.42 2.46 406 1.46
- - - - - - - - - - - - - - - 1. M = Medium; H = Heavy.
4.0 CHS 25 H 371 326 91 591.5 2.93 341 1.73 2.99 335 1.77
- - - - - - - - - - - - - - -
2. * Conforms to specification PTMA 9701.
42.4 x 3.2 CHS 32 M 382 336 61 396.5 3.09 323 1.23 3.17 316 1.26
- - - - - - - - - - - - - - -
3. Extra Heavy Pipe Grade C250L0 is available in Structural
4.0 CHS 32 H 382 336 61 396.5 3.79 264 1.50 3.86 259 1.53
- - - - - - - - - - - - - - - CHS Grade C250L0 which is compliant with AS 1163.
48.3 x 3.2 CHS 40 M 435 383 61 396.5 3.56 281 1.41 3.64 274 1.45
- - - - - - - - - - - - - - -
4.0 CHS 40 H 435 383 61 396.5 4.37 229 1.73 4.45 225 1.77
- - - - - - - - - - - - - - -
60.3 x 3.6 CHS 50 M 422 374 37 240.5 5.03 199 1.21 5.14 195 1.24
- - - - - - - - - - - - - - -
4.5 CHS 50 H 422 374 37 240.5 6.19 161 1.49 6.30 159 1.51
- - - - - - - - - - - - - - -
76.1 x 3.6 CHS 65 M 533 472 37 240.5 6.44 155 1.55 6.57 152 1.58
- - - - - - - - - - - - - - -
4.5 CHS 65 H 533 472 37 240.5 7.95 126 1.91 8.08 124 1.94
- - - - - - - - - - - - - - -
88.9 x 4.0 CHS 80 M 445 397 19 123.5 8.38 119 1.03 8.54 117 1.05
- - - - - - - - - - - - - - -
5.0 CHS 80 H 445 397 19 123.5 10.3 96.7 1.28 10.5 95.2 1.30
- - - - - - - - - - - - - - -
101.6 x 4.0 CHS 90 M 508 454 19 123.5 9.63 104 1.19 9.81 102 1.21
- - - - - - - - - - - - - - -
5.0 CHS 90 H 508 454 19 123.5 11.9 84.0 1.47 12.1 82.7 1.49
- - - - - - - - - - - - - - -
114.3 x 4.5 CHS 100 M 572 510 19 123.5 12.2 82.1 1.50 12.4 80.7 1.53
- - - - - - - - - - - - - - -
5.4 CHS 100 H 572 510 19 123.5 14.5 69.0 1.79 14.7 68.0 1.82
- - - - - - - - - - - - - - -
139.7 x 5.0 CHS 125 M 699 382 13 84.5 16.6 60.2 1.40 16.9 59.3 1.43
- - - - - - - - - - - - - - -
5.4 CHS 125 H 699 382 13 84.5 17.9 55.9 1.51 18.1 55.1 1.53
- - - - - - - - - - - - - - -
165.1 x 5.0 CHS 150 M 660 451 10 65 19.7 50.7 1.28 20.0 49.9 1.30
- - - - - - - - - - - - - - -
5.4 CHS 150 H 660 451 10 65 21.3 47.0 1.38 21.6 46.4 1.40
- - - - - - - - - - - - - - -
do
t
Smorgon Steel Tube Mills A.B.N. 22 010 469 977. PO Box 246 Sunnybank, Queensland 4109 Australia Telephone +61 7 3246 2600 Facsimile +61 7 3246 2660 E-mail tubemills@smorgonsteel.com.au Internet www.smorgonsteel.com.au/tubemills
DECEMBER 2006 3-7
PART 0 PART 9
PART 1 PART 2 PART 3 PART 4 PART 5 PART 6 PART 7 PART 8
Quick Reference Product Material Safety
General Information Structural Products Piping Products Other Products Steel Grades Mill Finishes Mill Processing Fabrication
Availability Guide Data Sheets (MSDS)
Blank Page
Smorgon Steel Tube Mills A.B.N. 22 010 469 977. PO Box 246 Sunnybank, Queensland 4109 Australia Telephone +61 7 3246 2600 Facsimile +61 7 3246 2660 E-mail tubemills@smorgonsteel.com.au Internet www.smorgonsteel.com.au/tubemills
DECEMBER 2006 3-8
|