MATERIAL SAFETY DATA SHEET
For Chemicals, Coatings and Related Materials Liquid Blue Fluorescent
鈥淓ssentially similar鈥? to form OSHA-20
MANUFACTURER REVISED 05/15/06
Sandy Brae Laboratories, Inc. EMERGENCY TELEPHONE NUMBERS:
119A Sandy Drive
Newark, DE 19713 Medical or Transportation
ph: 302-456-0446 CHEMTREC (24 hrs): 800-424-9300
fx: 302-456-0441
SECTION I- PRODUCT INFORMATION
H M I S HAZARD CODES
PRODUCT NAME: Liquid Blue Fluorescent
Health:
DESCRIPTION: Blue dye concentrate 1 (Slight)
Flammability: 3 (Severe)
Reactivity:
CLASS: Paste 1 (Slight)
B
Personal Protective Equipment:
SECTION IIA - HAZARDOUS INGREDIENTS
VAPOR PRESSURE
INGREDIENT PERCENT C.A.S.
o
mmHg @ 68 F
MATERIAL DESCRIPTION BY WEIGHT REGISTRY NO. LEL
Toluene 56.2 108-88-3 1.8 22 MM
N/A
SECTION IIB - NON HAZARDOUS INGREDIENTS
VAPOR PRESSURE
INGREDIENT PERCENT C.A.S.
mmHg @ 100oF
MATERIAL DESCRIPTION BY WEIGHT REGISTRY NO. LEL
Colorant N/A
Proprietary N/A
43.8
SECTION III PHYSICAL DATA
o
FREEZING POINT: < -76 F
BOILING RANGE: 232F, 110C
VAPOR DENSITY: 3.20
47 MM
VAPOR PRESSURE:
H2O SOLUBILITY:
0.95 - 1.05 0.05%
SPECIFIC GRAVITY:
2.4
EVAPORATION RATE: 62.5%
% VOLATILE BY VOLUME:
o
(relative to n-butyl acetate) POUR POINT ASTM D97: <0 F
Dark Amber, Aromatic odor
APPEARANCE AND COLOR:
Liquid Blue Fluorescent
SECTION IV - FIRE AND EXPLOSION DATA
EXPLOSIVE LIMITS: LEL UEL (%V IN AIR)
1.4 7.4
FLASH POINT: 45.0F, 7.2C
TCC
METHOD USED:
EXTINGUISHING MEDIA:
Use water to cool fire exposed to surfaces and to protect personnel. ISOLATE 鈥淔uel鈥? supply
from fire. Use foam, dry chemical or water spray to extinguish fire. Avoid spraying water
directly into storage container.
SPECIAL FIRE FIGHTING PROCEDURES:
-Wear NIOSH-MSHA approved self contained breathing apparatus.
-Wear impervious clothing .
-Use water spray to cool and protect exposed material or overheated containers.
-Take care not to spread fire with water.
SECTION V - TOXICOLOGICAL INFORMATION
DEFINITIONS:
N/A - Not Available and/or Not Applicable
Tag - Tag Closed Cup (TCC)
PEL - Units of mg/cubic meter
(*) - SARA Section 313 listed. IF CHEMICAL SYMBOL * IN () MATERIAL
IS A COMPOUND. Example: (*Cu) - report as copper compound.
NOTE: Please refer to the end of Section IX for Regulatory information pertaining to
the determination for the listing of ingredients, CAS numbers, percentages
and othe information.
Ld50 (g/kg) LC50 (ppm)
TLV (twa)
(rabbit)
INGREDIENT (rat) (rat)
3
mg/m DERMAL
MATERIAL DESCRIPTION PEL ORAL INHAL.
Colorant N/A N/A N/A N/A N/A
Toluene 100ppm 50ppm 636mg 14.1 ml 49g
Page 2
Liquid Blue Fluorescent
SECTION VI - HEALTH HAZARD DATA
EFFECTS OF OVEREXPOSURE: THRESHOLD LIMIT VALUES: See Section V
PRIMARY ROUTE(S) OF EXPOSURE/ENTRY: Eye contact, skin contact, inhalation, ingestion.
ACUTE EFFECTS OF OVEREXPOSURE:
EYES Vapors may irritate the eyes. Liquid is irritating and potentially damaging
to the eyes.
Liquid may irritate and dry the skin. Prolonged contact may lead to burns
SKIN
and blisters and may aggravate dermatitis.
Vapors may irritate the respiratory tract. May lead to headache, dizziness,
INHALATION
nausea, vomiting and unconsciousness. High vapor concentrations are
anesthetic and may have other central nervous system effects including including
death.
May lead to headache, dizziness, nausea and abdominal pain.
INGESTION
SECTION VII - EMERGENCY AND FIRST AID PROCEDURES
Immediately flush with large amounts of water for 10 - 15 minutes. Seek
EYE CONTACT:
immediate medical attention.
SKIN CONTACT: Promptly remove all contaminated clothing, shower if necessary. Remove
from skin with proprietary water less hand cleaner or cold cream. Discard
contaminated clothing and shoes.
INHALATION: If dizzy, drowsy or overcome, remove to fresh air. If breathing has stopped,
apply artificial respiration. Get medical attention as soon as possible.
INGESTION: Do not induce vomiting! Get medical attention immediately!!
STABILITY: Stable
CONDITIONS TO AVOID: Extreme heat. Open flames or sparks
INCOMPATIBILITY (MATERIALS TO AVOID):
Strong oxidizing agents. Strong reducing
agents. Acids.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon Dioxide and Carbon Monoxide
HAZARDOUS POLYMERIZATION: Will not occur
POLYMERIZATION CONDITIONS TO AVOID: Material not known to polymerize
SECTION VIII- REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: Extreme heat. Open flames or sparks
INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizing agents. Strong reducing
agents. Acids.
HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of Carbon, Oxides of Nitrogen
HAZARDOUS POLYMERIZATION: Will not occur
POLYMERIZATION CONDITIONS TO AVOID: Material not known to polymerize
Page 3
Liquid Blue Fluorescent
SECTION IX - REGULATORY INFORMATION
This MSDS is in compliance with OSHA Hazard Communication Standard 29CFR1910.1200. This MSDS
has also been prepared to be in compliance with the Commonwealth of Pennsylvania鈥檚 Right-To-Know
regulations for chemical manufacturers and should satisfy many other state Right-To-Know laws.
The chemical ingredient reporting rules for Pennsylvania are more detailed than OSHA regulations and
this MSDS lists the common chemical name and CAS number in Section II for:
Specifically hazardous ingredient >0.01% (OSHA is >0.1%)
Hazardous ingredient >1.0% (OSHA is the same)
Nonhazardous ingredient >3.0% )OSHA does not regulate)
TRADE SECRET entered in the CAS number column declares that the exact identity of the ingredient(s)
listed is proprietary information to Sandy Brae Laboratories. Percentages of ingredients are approximate
values for the purpose of hazard and SARA determination by the product鈥檚 uses and are not necessarily
exact specifications.
DEPARTMENT OF TRANSPORTATION (DOT):
DOT Shipping Description:
Environmentally Hazardous Substance, Liquid, N.O.S. (Polycyclic Organic Matter,
Naphthalenes, Liquid Naphthalene, 9, UN3082, III Marine Pollutant
(Methylnaphthalenes, Liquid, Naphthalene). In Containers of 240 gallons or less
containing 陆 gallons or less, this product is not regulated by DOT.
TSCA:
This product is listed on the TSCA Inventory as a UVBC (Unknown, variable
composition or biological) Chemical at CAS Registry Number 64742-94-5
CERCLA:
If the reportable quantity of this product is accidentally spilled, the incident is
subject to the provisions of the Comprehensive Environmental Response
Compensation and Liability Act (CERCLA) and must be reported to the National
Response Center by calling 800-424-8802. The reportable spill quantity of this
product is 1427 pounds. This product contains Polycyclic Organic Matter,
Naphthalene.
SARA TITLE III:
SARA 313 Yes
TSCA Inventory Yes
CERCLA RQ 1,000 Lb
RCRA code U220
Page 4
Liquid Blue Fluorescent
SECTION X - SPILL OR LEAK PROCEDURES
STEPS FOR MATERIAL SPILLAGE:
Remove all sources of ignition (flame, hot surfaces and any producers of electrical, static,
or frictional sparks). Wear appropriate protective clothing (See Section X). Ventilate
area and try to contain spill by diking with sand or other absorbent material. Collect spill
for disposal by scooping up liquids (if a large spill) and absorbing with sand or other
approved absorbent materials and dispose of in accordance with local, state and federal
regulations.
WASTE DISPOSAL METHODS:
Dispose of in accordance with local, state and federal regulations.
SECTION XI - SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION:
OSHA/NIOSH approved self-contained breathing apparatus or vapor cartridge respirator.
(Must be worn if PEL & TLV levels are exceeded).
VENTILATION:
Provide adequate cross air ventilation to keep dust and/or vapor levels below PEL &
TLV values. (See Section V or respiratory area).
PROTECTIVE GLOVES:
Impervious gloves (rubber or neoprene) to avoid direct skin contact.
EYE PROTECTION:
Splash proof safety goggles.
OTHER PROTECTIVE EQUIPMENT:
Eyewash station, emergency shower.
SECTION XII - SPECIAL PRECAUTIONS
HANDLING AND SPECIAL PRECAUTIONS:
Overheating may cause container to rupture.
Use Explosion-proof electrical equipment.
Container must be kept closed and ventilation provided to prevent vapor concentration buildup.
Store in a cool dry place.
Do not breath vapor or get liquid in eyes or on skin or clothing.
Keep away from heat or sources of ignition.
OTHER PRECAUTIONS:
Check all containers for leaks. Wear protective clothing as in Section X. Avoid prolonged
breathing of vapors or contact with skin. Ensure that all equipment is grounded tp prevent
static discharge. Containers of this material may be hazardous when emptied due to solid
or vapor residue. All hazard precautions given in this data sheet must be observed for
empty containers.
MSDS Blue Fluorescent Dye.cdr
Page 5
|