MSDS5442
MATERIAL SAFETY DATA SHEET
Precision Laboratories, Inc.
May 22, 2006
Updated:
Product Name: X-MARK鈩? AGRICULTURAL MARKING FOAM (BULK) Page 1 of 3
1. PRODUCT AND COMPANY IDENTIFICATION
X-MARK鈩? AGRICULTURAL MARKING FOAM (BULK)
Product Name:
Supplier: PRECISION LABORATORIES, INC.
1429 S. SHIELDS DRIVE
WAUKEGAN, IL 60085
Emergency telephone number: (Chemtrec Information 24 hours) 1-800-323-8351
For MSDS, Product Safety, or
Regulatory inquiries, call: (847) 596-3001
Customer Service, call: (800) 323-6280
2. COMPOSITION / INFORMATION ON INGREDIENTS
OSHA ACGIH % By
PEL TLV
Component CAS# Wt.
Surfactant Blend N/A N/A 52.0%
Trade Secret
Ethylene Glycol Monobutyl Ether 111-76-2 N/A 25 ppm (Skin) 3.0%
Water 7732-18-5 N/A N/A 33.0%
Propylene Glycol 57-55-6 N/A N/A 2.0%
Isopropanol 67-63-0 N/A 400-500 ppm 10.0%
Dioxane 123-91-1 N/A N/A <.03%
Formaldehyde 50-00-0 N/A N/A <.02%
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: COMBUSTIBLE LIQUID N.O.S.NA1993
HMIS Hazard Rating:
2 Health Hazard Rating
3 Flammability Rating
0 Reactivity Rating
X Personal Protection
Primary Routes of Exposure:
Eyes: Yes Skin: Yes Oral: No Inhalation: Yes
Signs and Symptoms of Exposure:
Eye contact: May cause irritation and reddening.
Skin contact: May cause irritation and reddening.
Inhalation: May cause respiratory and mucosal irritation.
Ingestion: May cause nausea, vomiting and diarrhea.
4. FIRST AID MEASURES
FIRST AID MEASURES FOR ACCIDENTAL:
Eye Exposure: Check for and remove contact lenses. Immediately flush eyes with water for at least 15 minutes. Cold water may be
used. Get medical attention if irritation occurs.
Skin Exposure: Wash effected area with plenty of soap and water. Cold water may be used. Get medical attention if irritation develops.
Inhalation: Move person to fresh air. If person is having difficulty breathing, give oxygen. If not breathing, give artificial respiration. Get
emergency medical help immediately.
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give fluids or force vomiting if the person
is unconscious, is having convulsions or has no gag reflex. If large quantities are swallowed, get emergency medical help immediately.
Medical Conditions Aggravated by Overexposure: Repeated or prolonged exposure is not known to aggravate medical condition.
5. FIRE-FIGHTING MEASURES
FIRE HAZARD DATA:
Flammability: N/D LEL: N/D UEL: N/D
Auto-ignition temperature: N/D
Flash Point: 98 潞F
Extinguishing Media: Water spray, foam, CO2, or dry chemicals may be used in areas where this product is stored.
Firefighters should wear NIOSHA/MSHA Approved Self-Contained breathing apparatus and full
Special Fire Fighting Procedures:
protective clothing.
Apply cooling water to sides of containers that are exposed to flames.
Additional Fire and Explosive Data:
MATERIAL SAFETY DATA SHEET
Precision Laboratories, Inc.
May 22, 2006
Updated
Product Name: X-MARK鈩? AGRICULTURAL MARKING FOAM (BULK) Page 2 of 3
6. ACCIDENTAL RELEASE MEASURES
Evacuate the spill area, except for cleanup personnel. Wear NIOSH/MSHA-approved respirator and protective equipment as
referenced in Section 7 below. Control spill with adsorbent pads or booms. If necessary, apply granular or loose adsorbent to
spill. When absorbed, sweep or otherwise collect and dispose of properly. WASTE DISPOSAL METHOD: Dispose of in
accordance with federal, state and local regulations.
7. HANDLING, STORAGE & SPILLAGE OR LEAK PROCEDURES
Precautions to be Taken in Handling: Keep away from heat, sparks and flame. Keep container closed. Safety goggles with full-face
shield and eyewash recommended. USDA-accepted Nitrile (CFR-20) or Neoprene Rubber (CFR-21) recommended. Wear appropriate
clothing to prevent repeated or prolonged skin contact. Use only with adequate mechanical exhaust ventilation. To avoid fire minimize
ignition sources.
Precautions to be Taken in Storage: Product should be stored in a dry place with temperatures above 30潞 F. Partially used containers
should be resealed between uses for maximum storage stability.
Spill or Leak Procedures: Recover free liquid. For recovery or disposal, add inert absorbent (sand, earth, sawdust, etc.) to spill area
and shovel into containers for disposal. Large spills may be flushed to sewer if local authorities approve such. Product is slippery under
foot; flush smooth surfaces thoroughly. Dispose of material in accordance with all federal, state and local regulations in an approved
waste disposal facility.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Note: When selecting personal protective equipment and clothing, follow all of the manufacturer specifications and recommendations
that apply to your specific operation and processing conditions. Take into consideration all working conditions and all chemicals to be
handled or processed.
Eye Protection: Wear splash-proof chemical safety goggles. Contact lenses should not be worn when working with chemicals.
Skin Protection: Wear coveralls and boots to minimize skin contact. As precautions, wash hands and face with mild soap and water
before eating, drinking, smoking or using restroom. After each shift, clean all protective equipment, wash work clothes, and shower.
Inhalation Protection: Not required under normal use conditions with good ventilation. Protect against spray mists & dust clouds.
Other Protection: Eye wash fountains and drench showers should be located within 100 feet or a 10 second walk or the work area per
ANSI Z358.1-1990. Personal Protection in Case of Large Spill: Splash goggles. Full suit. Boots, Gloves.
9. PHYSICAL AND CHEMICAL PROPERTIES
Dark amber liquid with alcohol odor.
Physical Appearance & Odor:
148.0 潞F (IBP)
Boiling Point:
7-8 卤
pH:
Soluble
Solubility in Water:
10. STABILITY AND REACTIVITY
Stable
Chemical Stability:
Strong acids/oxidizers. Do not mix with chlorinated detergents (bleach).
Incompatibility:
Hazardous Decomposition Products: Burning may produce carbon monoxide, carbon dioxide and unidentified organic compound.
Will Not Occur
Hazardous Polymerization:
None
Conditions to Avoid:
11. TOXICOLOGICAL INFORMATION
No toxicological data is available for this product.
12. ECOLOGICAL INFORMATION
No ecological data is available for this product.
MATERIAL SAFETY DATA SHEET
Precision Laboratories, Inc.
May 22, 2006
Updated
Product Name: X-MARK鈩? AGRICULTURAL MARKING FOAM (BULK) Page 3 of 3
13. DISPOSAL CONSIDERATIONS
Disposal Methods: Recycle or rework material if at all possible. Incinerate material at an approved facility. Treat at an acceptable
waste treatment facility, or municipal waste treatment plant after proper testing and approval waste samples in compliance with
applicable federal, state and local environmental regulations.
Container Reuse: An empty container can contain product residue, and should be not reused. If not professionally cleaned and
reconditioned, crushing or other means is recommended to prevent unauthorized reuse.
14. TRANSPORT INFORMATION
N/E
DOT Status (Highway and rail):
N/E
IATA Status (Air):
15. REGULATORY INFORMATION
Title III, Section 313: Contains no Section 313 listed substances subject to reporting.
SARA HAZARD:
Components listed
AICS (Australia):
Components listed
DSL (Canada):
Components listed
EINECS (Europe):
Components listed
TSCA:
WHILE INFORMATION AND RECOMMENDATIONS SET FORTH HEREIN ARE BELIEVED TO
BE ACCURATE AS OF THE DATE HEREON, PRECISION LABORATORIES, INC., MAKES NO
WARRANTY WITH RESPECT THERETO AND DISCLAIMS ALL LIABILITY FROM RELIANCE
THEREON.
N/D - Not Determined
N/A - Not Applicable
N/E 鈥? Not Established
|