MSDS5468
MATERIAL SAFETY DATA SHEET
SECTION 1: INDENTIFICATION OF PRODUCT SECTION 7: CONTROL METHODS
Manufacturer鈥檚 Name and Address: Respiratory Protection: Not normally needed.
Dr. T鈥檚 Nature Products, Inc Protective Gloves: Use gloves to avoid skin.
PO Box 682, 2658 US Hwy 19 North Mechanical: Use in well-ventilated area.
Pelham, GA 31779 Work/Hygiene Practices: Insure prompt removal from skin
Emergency Phone Number 1-800-299-6288
and clothing.
Product Name: Cobweb Eliminator
Local exhaust: Not normally needed. Recommended where
Date Prepared: Revised 2/16/06
levels exceed exposure limits.
Material Description/Proper Shipping Name:
Eye Protection: Chemical splash goggles.
NMFC 48580/ Sub Issue B-3/NOI/Class 55
Additional Hazard Classes: ND Other Protective Equipment: None normally needed.
Chemical Family: NF Formula: Patented
SECTION 2: Ingredients/identity Information
Chemical Names: No hazardous substances as defined by
Disclaimer:
OSHA鈥檚 hazardous communications standard 29 CFR 1910.1200.
The information in this MSDS was obtained from current and
SECTION 3: PHYSICAL DATA
reliable sources. However, the data is provided without any
warranty, expressed or implied, regarding its correctness or
Boiling Point (Degrees F): NF
accuracy. Since the conditions of handling, storage and
Vapor Pressure (mm Hg): NF
disposal of this product are beyond out control, it is the
Melting Point: NF
responsibility of the user both to determine safe conditions for
Solubility in Water: ND
use of this product and to assume full responsibility for loss,
Physical Description: Pinkish liquid with licorice odor.
injury, and expense arising out of product鈥檚 improper use. No
Specific Gravity (H20=1): 1
warranty expressed or inferred, regarding the product described
Percent Volatile by Volume (%): NF
in this MSDS shall be created or inferred by any statement in
Evaporation Rate (Butyl Acetate=1): <1
this MSDS. Various government agencies may have specific
pH: 4.4
regulations regarding the transportation, handling, storage, use
Percent Solid by Weight (%): NF
or disposal of this product which may mot be covered in this
Vapor Density (Air = 1): >1
MSDS. The user is responsible for full compliance.
SECTION 4: FIRE AND EXPOLOSION HAZARD DATA
Flash Point (Method Used): 216 Degrees closed cup
Flammable Limits: ND LEL: 4% UEL: 16%
Extinguishing Media: CO2, Foam, and Dry Chemical
Special Fire Fighting Procedures: Cool containers exposed to
flame with water. Use self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: Not Known
SECTION 5: REACTIVITY DATA
Stability: Stable
Conditions to Avoid: Avoid excessive heat, flame, and contact
with acids and strong oxidizers.
Incompatibility (Materials to Avoid): Avoid contact with acids,
strong oxidizers.
Hazardous Polymerization: Will not occur.
Hazardous Decomposition Products: CO, CO2, NO2, COCL2,
HCI, and unidentified organics.
SECTION 6: HEALTH HAZARD AND FIRST AID
Route of Entry:
Skin: Not absorbed, avoid skin contact. Eyes: Flush
with water for 15 minutes.
Inhalation: Use in well-ventilated areas.
Ingestion: Give Fluids. See a physician.
First Aid Procedures:
Skin: Wash with water.
Eyes: Flush with water for 15 minutes.
Inhalation: Remove to fresh air.
Ingestion: Give fluids, do not induce vomiting. See a physician
Carcinogenicity: NTP? No LARC Monographs? No OSHA
Regulated? No
Health Hazard: Inhalation may result in irritation of the
respiratory tract. High concentrations may result in headache,
nausea, dizziness and drowsiness. Contact with skin may result
in irritation. If contact with eyes, flush with water for 15 minutes.
Medical Condition Generally Aggravated by Exposure: Pre-
existing skin, eye, or respiratory disorders.
CWE MSDS- 2/16/06
|