SAFE Marine Europe
NANOTECHNOLOGIES
24-Nov-05 鈥? Ver. 1.2
MATERIAL SAFETY DATA SHEET (MSDS)
Area: Europe
EasyFlow SAFE 鈥? Part A
Product Line: Marine
1
IDENTIFICATION OF
Preparation/Product Name EASYFLOW SAFE 鈥? PART A
THE PREPARATION Product Code ESA
AND THE COMPANY Intended use See Technical Data Sheet (for professional use only)
Application Method See Technical Data Sheet
Company Name Safe Marine Nanotechnologies
Via Casilina 246 (Km. 68,300)
03013 Ferentino (FR) - Italy
Telephone No. +39 0775 395231/393068
Fax No. +39 0775 396828
Emergency Telephone No. +39 010 352808 (ITA - Poison Center - Genova "S. Martino")
+39 02 66101029 (ITA - Poison Center - Milano "Niguarda")
+39 06 3054343 (ITA - Poison Center - Roma "Gemelli")
+44 191 28 64 488 (UK - National Poison Center)
2
COMPOSITION
This product contains the following substances that present a health hazard within the meaning of
AND INFORMATION the Dangerous Substances Directive 67/548/EEC and the Chemicals (Hazard Information and
ON INGREDIENTS Packaging for Supply) Regulations 1999 (2) or have occupational exposure limits detailed in
EH40.
Chemical name CAS No. EC No. % Classification (*)
Bisphenol A-(epichlorhydrin) 25068-38-6 500-033-5 30-50 R36/38 R43
Tetraethyl orthosilicate (TEOS) 78-10-4 201-083-8 10-20 R20 R36/37
Copper(i)oxide 001317-39-1 1317-38-0 25-50 R22
Zinc pyrithione 236 -671 -3 2 235-671-3 3-5 R22, R 23, R 38,
R41,R50
* The full texts of the phrases are shown in section 16.
3
HAZARD
Flammable.
IDENTIFICATION Harmful by inhalation and if swallowed.
OF THE PRODUCT Irritating to eyes and skin.
May cause sensitization by skin contact.
Further information is given in section 11.
4
General - In all cases of doubt, or when symptoms persist, seek medical attention. Never give
FIRST AID
anything by mouth to an unconscious person.
MEASURES
Inhalation - Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration/oxygen by trained personnel.
Give nothing by mouth. If unconscious place in recovery position and seek medical advice.
Eye Contact - Check for and remove any contact lenses. Immediately flush eyes with running
water for at least 15 minutes, keeping eyelids open. Seek medical attention.
Skin Contact - Remove contaminated clothing. Wash skin thoroughly with soap and water or use
a recognized skin cleanser. Do NOT use solvents or thinners.
Ingestion - If accidentally swallowed obtain immediate medical attention. Keep at rest. The
decision to induce vomiting should be taken by a Doctor.
NANOTECHNOLOGIES
5
FIRE-FIGHTING
Recommended extinguishing media; alcohol resistant foam, CO虏 powder, water spray. Water jet
MEASURES not recommended.
Note: fire will produce dense black smoke. Decomposition products may be hazardous to health.
Avoid exposure and use breathing apparatus as appropriate. Cool closed containers exposed to fire
by spraying with water. Do not allow run off water and contaminants to enter drains or waterways.
6
ACCIDENTAL
Remove sources of ignition, do not turn lights or unprotected electrical equipment on or off. In
RELEASE MEASURES case of major spill or spillage in a confined space evacuate area and check that vapor levels are
below Lower Explosive Limit before reentering. Ventilate area and avoid breathing vapors. Take
personal protective measures listed in section 8. Contain and absorb spillage with non-combustible
materials e.g. sand, earth, vermiculite. Place in closed containers outside buildings and dispose of
according to Waste Regulations. (See section 13). Clean, preferably with detergent. Do not use
solvents. Do not allow spills to enter drains or watercourses. If drains, sewers, streams or lakes are
contaminated, inform local water company immediately. In case of contamination of rivers,
streams or lakes the Environmental Protection Agency should also be informed.
7
HANDLING AND
Handling - This coating may release toxic vapors. Vapors may form explosive mixtures with air.
STORAGE Storage, preparation and application areas should be ventilated to prevent creation of flammable or
explosive vapor concentrations and avoid concentrations higher than occupational exposure limits.
In Storage - Handle containers carefully to prevent damage and spillage. Naked flames and
smoking should not be permitted in storage areas. It is recommended that fork lift trucks and
electrical equipment are protected to the appropriate standard.
In Use - Avoid skin and eye contact. Avoid inhalation of vapors and spray mists. Observe label
precautions. Use personal protection as shown in section 8. Smoking, eating and drinking should
be prohibited in all preparation and application areas. Never use pressure to empty a container;
containers are not pressure vessels. All sources of ignition (hot surfaces, sparks, open flames etc)
should be excluded from areas of preparation and application. All electrical equipment (including
torches) should be protected (Ex) to the appropriate standard. The product may charge
electrostatically. Always use earthing leads when pouring solvents and transferring product.
Operators should wear clothing which does not generate static electricity (at least 60% natural
fiber) and antistatic footwear; floors should be of conducting type.
Storage - Store in a well ventilated, dry place away from sources of heat and direct sunlight. Store
on concrete or other impervious floor, preferably with bundling to contain any spillage. Do not
stack more than 3 pallets high. Keep container tightly closed. Containers which are opened must be
carefully resealed and kept upright to prevent leakage. Keep in the original container or one of the
same material. Prevent unauthorized access. The requirements of the Highly Flammable Liquids
and Liquefied Petroleum Gases Regulations apply if the flashpoint is between 21掳C and 32掳C.
8
EXPOSURE CONTROL
Engineering Measures - Provide adequate ventilation. Where reasonably practicable this should
& PERS. PROTECTION be achieved by the use of local exhaust ventilation and good general extraction. If these are not
sufficient to maintain concentrations of particulates and any vapor below occupational exposure
limits suitable respiratory protection must be worn.
Exposure Limits - The following occupational exposure limits have been established by the
Health and Safety Executive as published in EH40.
Tetraethyl Orthosilicate
100 ppm (850 mg/m3) OSHA TWA
10 ppm (85 mg/m3) OSHA TWA (vacated by 58 FR 35338, June 30, 1993)
10 ppm ACGIH TWA
10 ppm (85 mg/m3) NIOSH recommended TWA 10 hour(s)
Ethyl alcohol is formed upon contact with water or humid air.
Ethyl Alcohol (Ethanol)
1000 ppm (1900 mg/m3) OSHA TWA
MATERIAL SAFETY DATA SHEET Page 2 www.safenanotech.com
____________________________________________________________________________________________________
NANOTECHNOLOGIES
1000 ppm ACGIH TWA
1000 ppm (1900 mg/m3) NIOSH recommended TWA 10 hour(s)
Respiratory Protection - When concentrations exceed the exposure limits shown above workers
must wear appropriate respirators approved in accordance with Directive 89/656/EEC and the
Personal Protection Equipment Regulations.
Eye Protection - Wear safety eyewear, e.g. safety spectacles, goggles or visors to protect against
the splash of liquids. Eyewear should comply with British Standard 2092.
Hand Protection - Nitrile rubber gloves should be worn during mixing and application.
Skin Protection - Overalls which cover the body, arms and legs should be worn. Skin should not
be exposed. Barrier creams may help to protect areas which are difficult to cover such as the face
and neck. They should however not be applied once exposure has occurred. Petroleum jelly based
types such as Vaseline should not be used. All parts of the body should be washed after contact.
9
PHYSICAL AND
Physical State Liquid
CHEMICAL Flash Point (deg C) 30
PROPERTIES Viscosity (cSt) 280
Specific Gravity 1.51
Vapor Density Heavier than air
Lower Explosive Limit (LEL) 1.0
Solubility in Water Slightly Miscible
RAQ - to ventilate to 10% of LEL (m 鲁/l) 50
10
STABILITY AND
Stable under recommended storage and handling conditions (see section 7). When exposed to high
REACTIVITY temperatures may produce hazardous decomposition products such as carbon monoxide, carbon
dioxide, oxides of nitrogen and smoke. Keep away from oxidizing agents, strongly alkaline and
strongly acidic materials in order to avoid possible exothermic reactions.
11
TOXICOLOGICAL
There is no data available on the product itself. Exposure to vapor concentrations from the paint
INFORMATION components in excess of the stated occupational exposure limits may result in adverse health
effects such as mucous membrane and respiratory system irritation and adverse effects on the
kidneys, liver and central nervous system. Symptoms include headache, nausea, dizziness, fatigue,
muscular weakness, drowsiness and in extreme cases, loss of consciousness. Repeated or
prolonged contact with the preparation may cause removal of natural fat from the skin resulting in
dryness, irritation and possible non-allergic contact dermatitis. Paint components may also be
absorbed through the skin. Splashes of liquid in the eyes may cause irritation and soreness with
possible reversible damage.
12
ECOLOGICAL
There is no data available on the product itself. The product should not be allowed to enter drains
INFORMATION or water courses.
13
DISPOSAL
Do not allow into drains or water courses. Wastes and empty containers should be disposed of in
CONSIDERATIONS accordance with regulations made under Control of Pollution Act, Environmental Protection Act,
or European Waste Catalogue, whatever applies. Using information provided in this sheet, advice
should be obtained from Waste Regulation Authority, whether special waste regulations apply.
14
TRANSPORT
Transport only in accordance with the following regulations:
INFORMATION
Regulatory UN num. Ship. name Class Packing gr. Label Additional Info
ADR/RID 1263 Paint 3 III Hazard id. N掳: 30
IMDG 1263 Paint 3 III Ems 3-05, Marine Poll.: No
IATA-DGR 1263 Paint 3 III -
MATERIAL SAFETY DATA SHEET Page 3 www.safenanotech.com
____________________________________________________________________________________________________
NANOTECHNOLOGIES
15
REGULATORY
In accordance with EC Directive 88/379/EEC and the Chemicals (Hazard Information and
INFORMATION Packaging for Supply) Regulations SI /3247/1994 this product is labeled as follows:
Danger Indication Harmful
Hazard symbol(s)
Harmful
Contains Reaction product: bisphenol A-(epichlorhydrin), Copper oxide (I), Zinc
Omadine powder.
Safety Phrases
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S43 In case of fire use alcohol resistant foam, CO虏 powder, water spray.
Water jet not recommended.
S44 Wear suitable gloves.
S61 Avoid release to the environment. Refer to special instructions/Safety
data sheets.
S36/37 Wear suitable protective clothing and gloves.
Risk Phrases
R10 Flammable.
R20/22 Harmful by inhalation and if swallowed.
R36/38 Irritating to eyes and skin.
R43 May cause sensitization by skin contact.
Additional Warning Phrases - Contains epoxy constituents. See information supplied by the
manufacturer. This information is provided by the present Safety Data Sheet.
16
OTHER
The information on this MSDS is based upon the present state of our knowledge and on current
INFORMATION EEC and national laws.
The product should not be used for purposes other than shown in the product data sheet without
first obtaining written advice. It is always the responsibility of the user to take all necessary steps
to meet the demands of applicable legislation. The information in this Health & Safety Data Sheet
is required pursuant to Directive 91/155/EEC and the Chemicals (Hazard Information & Packaging
for Supply) Regulations 1994. The full text of the R phrases appearing in section 2 is:
R20 Harmful by inhalation.
R22 Harmful if swallowed.
R23 Toxic by inhalation.
R36/37 Irritating to eyes and respiratory system.
R36/38 Irritating to eyes and skin.
R38 Irritating to skin.
R41 Risk of serious damage to the eyes.
R43 May cause sensitization by skin contact.
R50 Very toxic to aquatic organisms.
Your attention is drawn to the disclaimer on the Product Data Sheet with which this Safety Data
Sheet and the package labeling comprise an integral information system about this product. Copies
of the Product Data Sheet are available from Safe Marine Nanotechnologies on request or from
www.safenanotech.com.
MATERIAL SAFETY DATA SHEET Page 4 www.safenanotech.com
____________________________________________________________________________________________________
SAFE Marine Europe
NANOTECHNOLOGIES
24-Nov-05 鈥? Ver. 1.2
MATERIAL SAFETY DATA SHEET (MSDS)
Area: Europe
EasyFlow SAFE 鈥? Part B
Product Line: Marine
1
IDENTIFICATION OF
Preparation/Product Name EASYFLOW SAFE 鈥? PART B
THE PREPARATION Product Code ESB
AND THE COMPANY Intended use See Technical Data Sheet (for professional use only)
Application Method See Technical Data Sheet
Company Name Safe Marine Nanotechnologies
Via Casilina 246 (Km. 68,300)
03013 Ferentino (FR) - Italy
Telephone No. +39 0775 395231/393068
Fax No. +39 0775 396828
Emergency Telephone No. +39 010 352808 (ITA - Poison Center - Genova "S. Martino")
+39 02 66101029 (ITA - Poison Center - Milano "Niguarda")
+39 06 3054343 (ITA - Poison Center - Roma "Gemelli")
+44 191 28 64 488 (UK - National Poison Centre)
2
COMPOSITION
This product contains the following substances that present a health hazard within the meaning of
AND INFORMATION the Dangerous Substances Directive 67/548/EEC and the Chemicals (Hazard Information and
ON INGREDIENTS Packaging for Supply) Regulations 1999 (2) or have occupational exposure limits detailed in
EH40.
Chemical name CAS No. EC No. % Classification (*)
Cycloaliphatic amine 1761-71-3 217-168-8 20-25 R22 R35 R37 R43
Benzyl-alcohol 100-51-6 202-859-9 5-12.5 R20/R22
3-aminomethy-3,5,5 2855-13-2 220-666-8 5-12.5 R21/R22 R34 R43
trimethylcyclohexylamine R52/R53
Nonylphenol 25154-52-3 246-672-0 0.05-2.5 R22 R34 R50/R53
Ethyl Alcohol (Ethanol) 64-17-5 200-578-6 30-40 -
Tin Complex 77-58-7 201-039-8 0.1-1 R21/22 R36/38
R48/22 R63
* The full texts of the phrases are shown in section 16.
3
HAZARD
Highly Flammable.
IDENTIFICATION Harmful by inhalation, in contact with skin and if swallowed.
OF THE PRODUCT Causes severe burns.
Irritating to respiratory system.
May cause sensitization by skin contact.
Further information is given in section 11.
4
General - In all cases of doubt, or when symptoms persist, seek medical attention. Never give
FIRST AID
anything by mouth to an unconscious person.
MEASURES
Inhalation - Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration/oxygen by trained personnel.
Do not give anything by mouth. If unconscious place in recovery position and seek medical advice.
Eye Contact - Check for and remove any contact lenses. Flush eyes immediately with running
water for at least 15 minutes, keeping eyelids open. Seek medical attention.
SAFE MARINE
Skin Contact - Remove contaminated clothing. Wash skin thoroughly with soap and water or use
a recognized skin cleanser. Do NOT use solvents or thinners.
Ingestion - If accidentally swallowed obtain immediate medical attention. Keep at rest. The
decision to induce vomiting should be taken by a Doctor.
5
FIRE-FIGHTING
Recommended extinguishing media: alcohol resistant foam, CO虏 powder, water spray. Water jet
MEASURES not recommended.
Note: fire will produce dense black smoke. Decomposition products may be hazardous to health.
Avoid exposure and use breathing apparatus as appropriate. Cool closed containers exposed to fire
by spraying with water. Do not allow run off water and contaminants to enter drains or waterways.
6
ACCIDENTAL
Remove sources of ignition, do not turn lights or unprotected electrical equipment on or off. In
RELEASE MEASURES case of a major spill or spillage in a confined space evacuate the area and check that vapor levels
are below the Lower Explosive Limit before re-entering. Ventilate the area and avoid breathing
vapors. Take the personal protective measures listed in section 8. Contain and absorb spillage with
non-combustible materials e.g. sand, earth, vermiculite. Place in closed containers outside
buildings and dispose of according to the Waste Regulations. (See section 13). Clean, preferably
with a detergent. Do not use solvents. Do not allow spills to enter drains or watercourses. If drains,
sewers, streams or lakes are contaminated, inform the local water company immediately. In the
case of contamination of rivers, streams or lakes the Environmental Protection Agency should also
be informed.
7
HANDLING AND
Handling - This coating may release toxic vapors. Vapors may form explosive mixtures with air.
STORAGE Areas of storage, preparation and application should be ventilated to prevent the creation of
flammable or explosive concentrations of vapor in air and avoid vapor concentrations higher than
the occupational exposure limits.
In Storage - Handle containers carefully to prevent damage and spillage. Naked flames and
smoking should not be permitted in storage areas. It is recommended that fork lift trucks and
electrical equipment are protected to the appropriate standard.
In Use - Avoid skin and eye contact. Avoid inhalation of vapors and spray mists. Observe label
precautions. Use personal protection as shown in section 8. Smoking, eating and drinking should
be prohibited in all preparation and application areas. Never use pressure to empty a container;
containers are not pressure vessels. All sources of ignition (hot surfaces, sparks, open flames etc)
should be excluded from areas of preparation and application. All electrical equipment (including
torches) should be protected (Ex) to the appropriate standard. The product may charge
electrostatically. Always use earthing leads when pouring solvents and transferring product.
Operators should wear clothing which does not generate static electricity (at least 60% natural
fiber) and antistatic footwear; floors should be of conducting type.
Storage - Store in a well ventilated, dry place away from sources of heat and direct sunlight. Store
on concrete or other impervious floor, preferably with bundling to contain any spillage. Do not
stack more than 3 pallets high. Keep container tightly closed. Containers which are opened must be
carefully resealed and kept upright to prevent leakage. Keep in the original container or one of the
same material. Prevent unauthorized access. The requirements of the Highly Flammable Liquids
and Liquefied Petroleum Gases Regulations apply if the flashpoint is between 21掳C and 32掳C.
8
EXPOSURE CONTROL
Engineering Measures - Provide adequate ventilation. Where reasonably practicable this should
& PERS. PROTECTION be achieved by the use of local exhaust ventilation and good general extraction. If these are not
sufficient to maintain concentrations of particulates and any vapor below occupational exposure
limits suitable respiratory protection must be worn.
Exposure Limits - The following occupational exposure limits have been established by the
Health and Safety Executive as published in EH40.
MATERIAL SAFETY DATA SHEET Page 2 www.safenanotech.com
____________________________________________________________________________________________________
SAFE MARINE
Methylenebiscyclohexanamine (PACM)
Occupational exposure limit not established.
Ethyl Alcohol (Ethanol)
1000 ppm (1900 mg/m3) OSHA TWA
1000 ppm ACGIH TWA
1000 ppm (1900 mg/m3) NIOSH recommended TWA 10 hour(s)
Dibutyltin dilaurate
Observe organic tin compounds limits.
0.1 mg/m3 TWA OSHA PEL and ACGIH TLV-skin
0.2 mg/m3 (see n-butyl alcohol) ACGIH STEL
175 mg/kg - Oral Rat LD50
n-Butyl alcohol is formed on contact with water or humid air.
n-Butyl alcohol
100 ppm OSHA PEL TWA
Ceiling 50 ppm ACGIH TLV-skin
Respiratory Protection - When concentrations exceed the exposure limits shown above workers
must wear appropriate respirators approved in accordance with Directive 89/656/EEC and the
Personal Protection Equipment Regulations.
Eye Protection - Wear safety eyewear, e.g. safety spectacles, goggles or visors to protect against
the splash of liquids. Eyewear should comply with British Standard 2092.
Hand Protection - Nitrile rubber gloves should be worn during mixing and application.
Skin Protection - Overalls which cover the body, arms and legs should be worn. Skin should not
be exposed. Barrier creams may help to protect areas which are difficult to cover such as the face
and neck. They should however not be applied once exposure has occurred. Petroleum jelly based
types such as Vaseline should not be used. All parts of the body should be washed after contact.
9
PHYSICAL AND
Physical State Liquid/Gel
CHEMICAL Flash Point (deg C) 21
PROPERTIES Viscosity (cSt) -
Specific Gravity 0.93
Vapor Density Heavier than air
Lower Explosive Limit (LEL) 1.0
Solubility in Water Miscible
RAQ - to ventilate to 10% of LEL (m 鲁/l) 50
10
STABILITY AND
Stable under recommended storage and handling conditions (see section 7). When exposed to high
REACTIVITY temperatures may produce hazardous decomposition products such as carbon monoxide, carbon
dioxide, oxides of nitrogen and smoke. Keep away from oxidizing agents, strongly alkaline and
strongly acidic materials in order to avoid possible exothermic reactions.
11
TOXICOLOGICAL
There is no data available on the product itself. Exposure to vapour concentrations from the paint
INFORMATION components in excess of the stated occupational exposure limits may result in adverse health
effects such as mucous membrane and respiratory system irritation and adverse effects on the
kidneys, liver and central nervous system. Symptoms include headache, nausea, dizziness, fatigue,
muscular weakness, drowsiness and in extreme cases, loss of consciousness. Repeated or
prolonged contact with the preparation may cause removal of natural fat from the skin resulting in
dryness, irritation and possible non-allergic contact dermatitis. Paint components may also be
absorbed through the skin. Splashes of liquid in the eyes may cause irritation and soreness with
possible reversible damage.
MATERIAL SAFETY DATA SHEET Page 3 www.safenanotech.com
____________________________________________________________________________________________________
SAFE MARINE
Supplemental health information - Contains a chemical that is toxic by ingestion. Contains a
chemical that is toxic by dermal absorption. Contains cyclohexanamine,4,4'-methylenebis-cyclo-
aliphatic amine. Cyclo-aliphatic amines have the potential for chronic toxicity. Liver injury has
been observed in animal studies following oral administration. Skin contact with the uncured
material should not be permitted. Other toxicity information on Cyclo-aliphatic amines include:
salmonella mutagenicity assay (ames test) in the presence and absence of metabolic activation
showed no evidence of mutagenicity. Dogs given daily oral doses of 50 mg/kg Cyclo-aliphatic
amine, 5 days per week for up to 18 months experienced kidney and liver damage. The longest
continual exposure period was 18 months, therefore the exposure durations were not long enough
to conclude anything about the carcinogenic potential of Cyclo-aliphatic amines.
12
ECOLOGICAL
There is no data available on the product itself. The product should not be allowed to enter drains
INFORMATION or water courses.
13
DISPOSAL
Do not allow into drains or water courses. Wastes and empty containers should be disposed of in
CONSIDERATIONS accordance with regulations made under the Control of Pollution Act, the Environmental
Protection Act, or the European Waste Catalogue, whatever applies. Using information provided in
this data sheet advice should be obtained from the Waste Regulation Authority, whether the special
waste regulations apply.
14
TRANSPORT
Transport only in accordance with the following regulations:
INFORMATION
Regulatory UN num. Ship. name Class Packing gr. Label Additional Info
ADR/RID 1263 Paint 3 III Hazard id. N掳: 30
IMDG 1263 Paint 3 III Ems 3-05, Marine Poll.: No
IATA-DGR 1263 Paint 3 III -
15
REGULATORY
In accordance with EC Directive 88/379/EEC and the Chemicals (Hazard Information and
INFORMATION Packaging for Supply) Regulations SI /3247/1994 this product is labeled as follows:
Danger Indication Harmful
Hazard symbol(s)
Harmful
Contains Cycloaliphatic amine, Aliphatic amine, Ethyl Alcohol (Ethanol),
Tin complex.
Safety Phrases
S16 Keep away from sources of ignition - No smoking.
S26 In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
S43 In case of fire use alcohol resistant foam, CO虏 powder, water spray.
Water jet not recommended.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
S61 Avoid release to the environment. Refer to special instructions/Safety
data sheets.
S7 Keep container tightly closed
MATERIAL SAFETY DATA SHEET Page 4 www.safenanotech.com
____________________________________________________________________________________________________
SAFE MARINE
Risk Phrases
R10 Flammable.
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R35 Causes severe burns.
R37 Irritating to respiratory system
R43 May cause sensitization by skin contact.
16
OTHER
The information on this MSDS is based upon the present state of our knowledge and on current
INFORMATION EEC and national laws.
The product should not be used for purposes other than shown in the product data sheet without
first obtaining written advice. It is always the responsibility of the user to take all necessary steps
to meet the demands of applicable legislation. The information in this Health & Safety Data Sheet
is required pursuant to Directive 91/155/EEC and the Chemicals (Hazard Information & Packaging
for Supply) Regulations 1994. The full text of the R phrases appearing in section 2 is:
R20/22 Harmful by inhalation and if swallowed
R21/22 Harmful in contact with skin and if swallowed.
R22 Harmful if swallowed.
R34 Causes burns
R35 Causes severe burns.
R37 Irritating to eyes, respiratory system and skin.
R36/38 Irritating to eyes and skin.
R43 May cause sensitization by skin contact.
R48/22 Danger of serious damage to health by prolonged exposure if swallowed.
R50/53 Very toxic to aquatic organisms, may cause long term adverse effects in the aquatic
environment.
R52/53 Harmful to aquatic organisms, may cause long term adverse effects in the aquatic
environment.
R63 Possible risk of harm to the unborn child.
Your attention is drawn to the disclaimer on the Product Data Sheet with which this Safety Data
Sheet and the package labeling comprise an integral information system about this product. Copies
of the Product Data Sheet are available from Safe Marine Nanotechnologies on request or from
www.safenanotech.com.
MATERIAL SAFETY DATA SHEET Page 5 www.safenanotech.com
____________________________________________________________________________________________________
|