ZEP Manufacturing Company
Material Safety Data Sheet
Acuity Specialty Products Group, Inc.
P.O. Box 2015
Atlanta, GA 30301
and Safe Handling and Disposal Information
1-877-I-BUY-ZEP (428-9937)
www.zep.com
Section 1. Chemical Product and Company Identification
Product name ZEP FORMULA 6556
Product Use Acid. Cleaner.
Product Code 1093
Date of issue Supersedes 11/13/00
03/29/05
Emergency For MSDS Information:
Telephone Acuity Specialty Products Group, Inc.
Compliance Services 1-877-I-BUY-ZEP (428-9937)
Numbers
For Medical Emergency
INFOTRAC:
(877) 541-2016 Toll Free - All Calls Recorded
For a Transportation Emergency
CHEMTREC:
(800) 424-9300 - All Calls Recorded
Printing date: 03/29/05
In the District of Columbia (202) 483-7616
Prepared by Compliance Services Group
Acuity Specialty Products Group
1420 Seaboard Industrial Blvd.
Atlanta, GA 30318
Section 2. Composition, Information on Ingredients
Name of Hazardous Ingredients CAS # % by Weight Exposure Limits
HYDROCHLORIC ACID; muriatic acid; hydrogen chloride; HCl 7647-01-0 25 - 35 ACGIH TLV/OSHA PEL (United States).
CEIL: 5 ppm 8 hour(s).
OSHA PEL (United States).
CEIL: 7 mg/m3 8 hour(s).
Section 3. Hazards Identification HMIS
Health 3
Acute Effects Routes of Entry Dermal contact. Eye contact. Ingestion.
Fire Hazard 0
Skin Hazardous in case of skin contact (corrosive). Causes skin burns. Skin inflammation is Reactivity 1
characterized by itching, scaling, reddening, or, occasionally, blistering.
Eyes Hazardous in case of eye contact (corrosive). Direct contact with the eyes can cause Personal Protection X
irreversible damage including blindness.
Inhalation Hazardous in case of inhalation (lung corrosive). Inhalation of the spray mist may produce
severe irritation of respiratory tract, characterized by coughing, choking, or shortness of
breath. Over-exposure by inhalation may cause respiratory irritation.
Ingestion May be fatal if swallowed. May cause burns to mouth, throat and stomach.
NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse health effects are lessened by
following all prescribed safety precautions, including use of proper personal protective equipment.
Carcinogenic Effects Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
Chronic Effects Repeated or prolonged contact with spray mist may produce chronic eye irritation and severe skin
irritation. Repeated or prolonged exposure to spray mist may produce respiratory tract irritation
leading to frequent attacks of bronchial infection. Repeated exposure to a highly toxic material may
produce general deterioration of health by an accumulation in one or many human organs.
See Toxicological Information (section 11)
Section 4. First Aid Measures
Eye Contact Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes. Get medical attention immediately.
Skin Contact In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing
contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get
medical attention immediately.
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
oxygen. Get medical attention immediately.
Ingestion If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything
by mouth to an unconscious person. If affected person is conscious, give plenty of water to drink. Get
medical attention immediately.
Page: 1/3
Material Safety Data Sheet Product Name ZEP FORMULA 6556
Product Code 1093
Section 5. Fire Fighting Measures
0
Flash Point Flammable Limits Not applicable.
Not applicable.
31
Non combustible.
Flammability
Fire Hazard Flammable hydrogen gas may be produced on prolonged contact with metals such as aluminum,
tin, lead and zinc. May emit toxic fumes under fire conditions.
Fire-Fighting Procedures Wear special protective clothing and positive pressure, self-contained
breathing apparatus. Do not release runoff from fire to sewers or
waterways.
Section 6. Accidental Release Measures
Spill Clean up Put on appropriate personal protective equipment (see Section 8). Absorb with an inert material and place in
an appropriate waste disposal container. To clean the floor and all objects contaminated by this material, use
detergent. Finish cleaning by spreading water on the contaminated surface and dispose of according to local
and regional authority requirements.
Section 7. Handling and Storage
Handling Put on appropriate personal protective equipment (see Section 8). Do not get in eyes, on skin, or on clothing. Use
only with adequate ventilation. Do not breathe vapor or mist. Do not ingest. Observe label precautions. Do not
reuse product container. Wash contaminated clothing before reusing. Wash thoroughly after handling.
Storage Keep container tightly closed and dry. Keep container in a cool, well-ventilated area. Store between 40掳F -
120掳F (4.4掳C - 49掳C). Keep away from incompatibles. Keep away from food, drink and animal feeding stuffs.
Keep out of the reach of children.
Section 8. Exposure Controls, Personal Protection
Personal Protection Protective Clothing (Pictograms)
Eyes Splash goggles. Face shield. It is generally recognized that contact lenses
should not be worn when working with chemicals because contact lenses
may contribute to the severity of an eye injury.
Body Wear appropriate protective clothing to prevent skin contact.
Recommended: Nitrile gloves. Neoprene gloves. Rubber gloves.
Chemical resistant boots. Synthetic apron. Chemical resistant protective
suit.
Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective occupational exposure limits. Wear appropriate respirator when
ventilation is inadequate.
Section 9. Physical and Chemical Properties
Physical State Liquid. (Fuming liquid.) Color Brown.
Acid. Pungent. (Strong.)
Odor
pH <1 [Acidic.]
Vapor Pressure Not determined.
Boiling Point 100掳C (212掳F)
Vapor Density Not determined.
Specific Gravity 1.13 (Water = 1)
Evaporation Rate Not determined.
Solubility Soluble in cold water, hot water.
VOC (Consumer) 0 (g/l).
Section 10. Stability and Reactivity
Stability and Reactivity The product is stable.
Incompatibility Reactive with oxidizing agents, metals, alkalis. Incompatible with aluminum and magnesium.
Hazardous Polymerization Will not occur.
Hazardous Decomposition Products Hydrogen Chloride (HCl), Chlorine and Phosgene Gas.
Section 11. Toxicological Information
Toxicity to Animals Hydrochloric Acid:
ORAL (LD50): Acute: 900 mg/kg [Rabbit].
VAPOR (LC50): Acute: 3124 ppm 1 hour(s) [Rat].
Section 12. Ecological Information
Ecotoxicity Not available.
Biodegradable/OECD Not available.
Section 13. Disposal Considerations
Waste must be disposed of in accordance with federal, Waste Stream Code: D002
Waste
Classification: - (Hazardous waste.)
state and local environmental control regulations.
Information
Origin: - (RCRA waste.)
Consult your local or regional authorities.
Page: 2/3
Material Safety Data Sheet Product Name ZEP FORMULA 6556
Product Code 1093
Section 14. Transport Information
Proper shipping name Corrosive liquid, acidic, inorganic, n.o.s.(Hydrochloric Acid)
DOT Classification DOT Class 8: Corrosive liquid. UN number 3264
NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to
the Bill of Lading with your shipment.
Section 15. Regulatory Information
U.S. Federal Regulations SARA 313 toxic chemical notification and release reporting:
No products were found.
Clean Water Act (CWA) 311: Hydrochloric Acid RQ 5000 lbs. (2268 kg)
Clean air act (CAA) 112 regulated toxic substances: No products were found.
All Components of this product are listed or exempt from listing on TSCA inventory.
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|