ZEP Manufacturing Company
Material Safety Data Sheet
Acuity Specialty Products Group, Inc.
P.O. Box 2015
Atlanta, GA 30301
and Safe Handling and Disposal Information
1-877-I-BUY-ZEP (428-9937)
www.zep.com
Section 1. Chemical Product and Company Identification
Product name ZEP ICE MELT
Product Use Aerosol Ice Melt Compound
Product Code 0176
Date of issue Supersedes 08/22/03
06/22/05
Emergency For MSDS Information:
Telephone Acuity Specialty Products Group, Inc.
Compliance Services 1-877-I-BUY-ZEP (428-9937)
Numbers
For Medical Emergency
INFOTRAC:
(877) 541-2016 Toll Free - All Calls Recorded
For a Transportation Emergency
CHEMTREC:
(800) 424-9300 - All Calls Recorded
Printing date: 06/22/05
In the District of Columbia (202) 483-7616
Prepared by Compliance Services Group
Acuity Specialty Products Group
1420 Seaboard Industrial Blvd.
Atlanta, GA 30318
Section 2. Composition, Information on Ingredients
Name of Hazardous Ingredients CAS # % by Weight Exposure Limits
ETHANOL; ethyl alcohol; grain alcohol 64-17-5 70 - 80 ACGIH TLV / OSHA PEL (United States).
TWA: 1000 ppm 8 hour(s).
ETHYLENE GLYCOL; 1,2-ethandiol; glycol; ethylene dihydrate 107-21-1 20 - 30 ACGIH TLV (United States).
TWA: 50 ppm 8 hour(s).
Section 3. Hazards Identification HMIS
Health 2
Acute Effects Routes of Entry Eye contact. Skin contact Inhalation. Ingestion.
Fire Hazard 3
Skin Hazardous in case of skin contact (irritant). Non-sensitizer for skin. Skin inflammation is Reactivity 0
characterized by itching, scaling, reddening, or, occasionally, blistering.
Eyes Hazardous in case of eye contact (irritant). Liquid in eye may cause irritation with possible Personal Protection B
damage if not rinsed immediately. Inflammation of the eye is characterized by redness,
watering, and itching.
Inhalation Hazardous in case of inhalation (lung irritant). Over-exposure by inhalation may cause
respiratory irritation. Prolonged exposure may cause narcotic effect. Can cause dizziness,
lighheadedness, headache, nausea, and blurred vision.
Ingestion Extremely hazardous in case of ingestion. Toxic if swallowed. May be fatal if swallowed.
If ingested, call a physician or Poison Control Center immediately.
NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse health effects are lessened by
following all prescribed safety precautions, including use of proper personal protective equipment.
Carcinogenic Effects Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
Chronic Effects The substance may be toxic to kidneys, the nervous system, the reproductive system, liver. Repeated
or prolonged exposure to the substance can produce target organs damage. Prolonged or repeated
contact may dry skin and cause irritation. Inhalation and ingestion may cause drowsiness, dizziness,
incoordination and other effects of intoxication. Repeated exposure to a highly toxic material may
produce general deterioration of health by an accumulation in one or many human organs.
See Toxicological Information (section 11)
Section 4. First Aid Measures
Eye Contact Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get
medical attention immediately.
Skin Contact Wash affected area with soap or mild detergent and water. Cover the irritated skin with an emollient.
Remove contaminated clothing and shoes. Get medical attention if irritation develops.
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
oxygen. Get medical attention.
Page: 1/3
Material Safety Data Sheet Product Name ZEP ICE MELT
Product Code 0176
Ingestion If ingested, call a physician or Poison Control Center immediately. Never give anything by mouth to an
unconscious person. If vomiting occurs, keep head lower than hips to help prevent aspiration. If
swallowed, do not induce vomiting unless directed to do so by medical personnel. Get medical attention
immediately.
Section 5. Fire Fighting Measures
3
Flash Point Flammable Limits Not determined.
Not determined.
10
FLAMMABLE. (CSMA)
Flammability
Fire Hazard Container explosion may occur under fire conditions or when heated. Cool closed containers
exposed to fire with water.
Fire-Fighting Procedures Use water spray or fog. Cool containing vessels with water jet in order to
prevent pressure build-up, autoignition or explosion. Fire-fighters should
wear proper protective equipment.
Section 6. Accidental Release Measures
Spill Clean up Large spills are unlikely due to packaging.
Section 7. Handling and Storage
Handling Keep away from heat, sparks and flame. Avoid contact with eyes, skin and clothing. Do not ingest. Use only
with adequate ventilation. Avoid breathing vapors of this product.
Storage Keep container in a cool, well-ventilated area. Avoid all possible sources of ignition (spark or flame). Do not store
above 49掳C (120.2掳F). Do not puncture or incinerate. Keep out of the reach of children.
Section 8. Exposure Controls, Personal Protection
Personal Protection Protective Clothing (Pictograms)
Eyes Safety glasses.
Body Neoprene gloves. Nitrile gloves. Rubber gloves.
Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective occupational exposure limits. Wear appropriate respirator when
ventilation is inadequate.
Section 9. Physical and Chemical Properties
Physical State Liquid. (Aerosol.) Color Clear. Colorless.
Strong.
Odor
pH Not applicable.
Vapor Pressure 2.7 kPa (20 mmHg) (at 20掳C)
Boiling Point Not determined.
Vapor Density Not determined.
Specific Gravity 0.84 (Water = 1)
Evaporation Rate >1
Solubility Easily soluble in cold water, hot water.
VOC (Consumer) 96.7%
Section 10. Stability and Reactivity
Stability and Reactivity The product is stable.
Incompatibility Avoid contact with strong oxidizers, excessive heat, sparks or open flame.
Hazardous Polymerization Will not occur.
Hazardous Decomposition Products Carbon Dioxide, Carbon Monoxide and other organic materials..
Section 11. Toxicological Information
Toxicity to Animals Ethanol:
ORAL (LD50): Acute: 7060 mg/kg [Rat].
Ethylene Glycol:
ORAL (LD50): Acute: 4000 mg/kg [Rat].
DERMAL (LD50): Acute: >2000 mg/kg [Rat ].
Section 12. Ecological Information
Ecotoxicity Not available.
Biodegradable/OECD Not available.
Section 13. Disposal Considerations
Waste must be disposed of in accordance with federal, Waste Stream Code: D001
Waste
Classification: - (Hazardous waste.)
state and local environmental control regulations.
Information
Origin: - (RCRA waste.)
Consult your local or regional authorities.
Page: 2/3
Material Safety Data Sheet Product Name ZEP ICE MELT
Product Code 0176
Section 14. Transport Information
Proper shipping name Consumer Commodity
DOT Classification ORM-D UN number Not regulated.
NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to
the Bill of Lading with your shipment.
Section 15. Regulatory Information
U.S. Federal Regulations SARA 313 toxic chemical notification and release reporting:
Ethylene Glycol
Clean Water Act (CWA) 311: No products were found.
Clean air act (CAA) 112 regulated toxic substances: Ethylene Glycol
All Components of this product are listed or exempt from listing on TSCA inventory.
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|