Search   
MSDS 
:
 Sequencing Gel Loading Dye
CAS 
:
 0-00-0
SYNONYMS 
:
 Mixture
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| Not available |Proprietary Component | <3.0 | unlisted |
|----------------|--------------------------------------|----------|-----------|
| 75-12-7 |Formamide | <90.0 | 200-842-0 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: T
Risk Phrases: 61

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
May cause harm to the unborn child.Hygroscopic (absorbs moisture
from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. May cause respiratory tract irritation.
Chronic:
Prolonged or repeated exposure may cause adverse reproductive
effects. May cause fetal effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Wear a self contained breathing apparatus and
appropriate personal protection. (See Exposure Controls, Personal
Protection section). Absorb spill using an absorbent,
non-combustible material such as earth, sand, or vermiculite. Do not
use combustible materials such as sawdust. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Use spark-proof tools and
explosion proof equipment. Avoid contact with skin and eyes. Keep
container tightly closed. Avoid ingestion and inhalation.
Storage:
Do not store in direct sunlight. Keep refrigerated. (Store below
4C/39F.) Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 0-00-0:

CAS# 75-12-7:
United Kingdom, WEL - TWA: 20 ppm TWA; 37 mg/m3 TWA
United Kingdom, WEL - STEL: 30 ppm STEL; 56 mg/m3 STEL

Belgium - TWA: 10 ppm VLE; 18 mg/m3 VLE
France - VME: 20 ppm VME; 30 mg/m3 VME
Germany: 18 mg/m3 TWA
Germany: Skin absorber
Malaysia: 10 ppm TWA; 18 mg/m3 TWA
Netherlands: 9 ppm MAC; 16 mg/m3 MAC
Russia: 3 mg/m3 TWA
Spain: 10 ppm VLA-ED; 19 mg/m3 VLA-ED
CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: dark purple
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 310 deg F ( 154.44 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble in water.
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, bases, aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, ammonia and/or
derivatives.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-00-0 unlisted.
CAS# 75-12-7: LQ0525000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 75-12-7: Draize test, rabbit, eye: 100 mg Severe; Inhalation,
rat: LC50 = >3900 ppm/6H; Oral, mouse: LD50 = 3150 mg/kg; Oral, rat:
LD50 = 5577 mg/kg; Skin, rabbit: LD50 = 17 gm/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Proprietary Component -
Not listed by ACGIH, IARC, or NTP.
Formamide -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Minnow LC50=>500mg/L/48H

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 61 May cause harm to the unborn child.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 0-00-0: No information available.
CAS# 75-12-7: 1
CAS# 7732-18-5: No information available.
Canada
CAS# 75-12-7 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 0-00-0 is not listed on Canada's Ingredient Disclosure List.
CAS# 75-12-7 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-0 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 75-12-7 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 7/12/1999 Revision #4 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dri-Decon
N,N-Dimethylcyclohexylamine, 99% 98-94-2
Decon 90 0-01-1
Zinc sulfate 0.05M solution 7732-18-5
Benzoylhydrazine, 98% 613-94-5
Iron (III) Chloride Solution 7705-08-0
Diisopropyl phosphite, 98% 1809-20-7
Benzyltriethylammonium Cyanate 0-00-1
Acrylonitrile 107-13-1
Ethanol, Absolute 64-17-5
L(+)Arabinose 87-72-9
Rennet 9001-98-3
Kjeldahl digestion reagent 7446-08-4
Kjeldahl phenol reagent (alkaline) 108-95-2
1,4-Benzodioxan-6-yl methyl ketone, 98% 2879-20-1
Indicator concentrate solution 61-73-4
Sodium Hydroxide/Sodium Thiosulfate Solution 1310-73-2
Oxygen mixture 1313-13-9
AA Flame Calibration Standard 7447-40-7
Chemicon A 139-33-3
Hydrochloric Acid, 28.0% 7647-01-0
Spectroflux R 100 12007-60-2
Chemicon B 7664-93-9
bis(Triphenylphosphine)dicarbonylnickel 13007-90-4
Solmix 64-17-5
Sodium acetate buffer solution 64-19-7
Polyurethane foam (polymer B) 0-00-0
Lanthanum Chloride Solution 7647-01-0
Martius yellow, biological stain and chemical indicator 605-69-6
Trans-Stilbene Oxide, 99% 1439-07-2
Sodium Acetate Buffer Solution with 5.0% Triton X-100 64-19-7
Trimethylamine 25% in methanol 65-55-0
Turpentine Substitute (White Spirit) 64742-88-7
CHAPSO 82473-24-3
Isonipecotamide, 98% 39546-32-2
CHAPS 75621-03-3
Xylene Cyanole FF 2650-17-1
Bovine Serum Albumin 9048-46-8
Lysozyme, Egg White 12650-88-3
BES 10191-18-1
TAPS (Free Acid) 29915-38-6
Ficoll 400 26873-85-8
PBS Phosphate Buffered Saline 7447-40-7
Denhardt's Reagent 50X Solution 7732-18-5
Cesium Sulfate, 98% (Titr.) 10294-54-9
Protein Gel Loading Dye 0-00-0
Denhardt's Reagent 50X Powder 150 mg 9003-39-8
Agarose Gel Loading Dye 0-00-0
Glycerol Gel Loading Dye 5X 0-00-0
Sequencing Gel Loading Dye 0-00-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net