Search   
MSDS 
:
 CHAPS
CAS 
:
 75621-03-3
SYNONYMS 
:
 3-[3-Cholamidopropyl)Dimethylammonio] -1-Propanesulfonate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 75621-03-3 |CHAPS | 100.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Avoid ingestion and inhalation. Wash clothing
before reuse.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 75621-03-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white crystalline powder
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C32H58N207S
Molecular Weight: 3373.8529

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 75621-03-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
CHAPS -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 75621-03-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 75621-03-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 75621-03-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/13/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dri-Decon
N,N-Dimethylcyclohexylamine, 99% 98-94-2
Decon 90 0-01-1
Zinc sulfate 0.05M solution 7732-18-5
Benzoylhydrazine, 98% 613-94-5
Iron (III) Chloride Solution 7705-08-0
Diisopropyl phosphite, 98% 1809-20-7
Benzyltriethylammonium Cyanate 0-00-1
Acrylonitrile 107-13-1
Ethanol, Absolute 64-17-5
L(+)Arabinose 87-72-9
Rennet 9001-98-3
Kjeldahl digestion reagent 7446-08-4
Kjeldahl phenol reagent (alkaline) 108-95-2
1,4-Benzodioxan-6-yl methyl ketone, 98% 2879-20-1
Indicator concentrate solution 61-73-4
Sodium Hydroxide/Sodium Thiosulfate Solution 1310-73-2
Oxygen mixture 1313-13-9
AA Flame Calibration Standard 7447-40-7
Chemicon A 139-33-3
Hydrochloric Acid, 28.0% 7647-01-0
Spectroflux R 100 12007-60-2
Chemicon B 7664-93-9
bis(Triphenylphosphine)dicarbonylnickel 13007-90-4
Solmix 64-17-5
Sodium acetate buffer solution 64-19-7
Polyurethane foam (polymer B) 0-00-0
Lanthanum Chloride Solution 7647-01-0
Martius yellow, biological stain and chemical indicator 605-69-6
Trans-Stilbene Oxide, 99% 1439-07-2
Sodium Acetate Buffer Solution with 5.0% Triton X-100 64-19-7
Trimethylamine 25% in methanol 65-55-0
Turpentine Substitute (White Spirit) 64742-88-7
CHAPSO 82473-24-3
Isonipecotamide, 98% 39546-32-2
CHAPS 75621-03-3
Xylene Cyanole FF 2650-17-1
Bovine Serum Albumin 9048-46-8
Lysozyme, Egg White 12650-88-3
BES 10191-18-1
TAPS (Free Acid) 29915-38-6
Ficoll 400 26873-85-8
PBS Phosphate Buffered Saline 7447-40-7
Denhardt's Reagent 50X Solution 7732-18-5
Cesium Sulfate, 98% (Titr.) 10294-54-9
Protein Gel Loading Dye 0-00-0
Denhardt's Reagent 50X Powder 150 mg 9003-39-8
Agarose Gel Loading Dye 0-00-0
Glycerol Gel Loading Dye 5X 0-00-0
Sequencing Gel Loading Dye 0-00-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net