Search   
MSDS 
:
 Kjeldahl digestion reagent
CAS 
:
 7446-08-4
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7446-08-4 |Selenium dioxide | 0.2 | 231-194-7 |
|----------------|--------------------------------------|----------|-----------|
| 7601-90-3 |Perchloric acid | 1.3 | 231-512-4 |
|----------------|--------------------------------------|----------|-----------|
| 7664-93-9 |Sulfuric acid | 93.8 | 231-639-5 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes severe burns.Corrosive.Oxidizer.

Potential Health Effects
Eye:
Causes severe eye burns. May cause irreversible eye injury.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Harmful if inhaled. May cause severe irritation of the respiratory
tract with sore throat, coughing, shortness of breath and delayed
lung edema. Causes chemical burns to the respiratory tract.
Chronic:
Prolonged or repeated inhalation may cause nosebleeds, nasal
congestion, erosion of the teeth, perforation of the nasal septum,
chest pain and bronchitis. Prolonged or repeated eye contact may
cause conjunctivitis. Prolonged or repeated skin contact may cause
sensitization dermatitis and possible destruction and/or ulceration.
Chronic ingestion may cause effects similar to those of acute
ingestion.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Strong oxidizer. Contact with other material may
cause fire. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Wear appropriate
protective clothing to prevent contact with skin and eyes. Wear a
self-contained breathing apparatus (SCBA) to prevent contact with
thermal decomposition products. Contact with water can cause violent
liberation of heat and splattering of the material.
Extinguishing Media:
Do NOT use water directly on fire. Use water spray to cool
fire-exposed containers. Use carbon dioxide or dry chemical.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Cover with sand, dry lime or soda ash and place in a closed
container for disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not get in eyes,
on skin, or on clothing. Keep container tightly closed. Avoid
ingestion and inhalation. Do not allow contact with water.
Storage:
Do not store near combustible materials. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Do not store near alkaline substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 7446-08-4:
United Kingdom, WEL - TWA: (listed as selenium compounds): 0.1 mg
TWA (except hydrogen selenide, as Se)
United Kingdom, WEL - STEL: (listed as selenium compounds): 0.3 m
STEL (except hydrogen selenide, as Se)
United States OSHA: 0.2 mg/m3 TWA (as Se) (listed under Selenium
compounds).
Belgium - TWA: (listed as selenium compounds): 0.2 mg/m3 VLE (as
Japan: (listed as selenium compounds): 0.1 mg/m3 OEL (except SeH2
SeF6, as Se)
Malaysia: (listed as selenium compounds): 0.2 mg/m3 TWA (as Se)
Netherlands: (listed as selenium compounds): 0.1 mg/m3 MAC (as Se
Russia: 0.1 mg/m3 TWA
Spain: (listed as selenium compounds): 0.1 mg/m3 VLA-ED (except
hydrogen selenide, as Se)
CAS# 7601-90-3:

CAS# 7664-93-9:
United States OSHA: 1 mg/m3 TWA
Belgium - TWA: 1 mg/m3 VLE
Belgium - STEL: 3 mg/m3 VLE
France - VME: 1 mg/m3 VME
France - VLE: 3 mg/m3 VLE
Germany: 0.5 mg/m3 TWA (inhalable fraction, battery manufacture,
metal working in a close
Japan: 1 mg/m3 Ceiling
Malaysia: 1 mg/m3 TWA
Netherlands: 1 mg/m3 MAC
Russia: 1 mg/m3 TWA
Spain: 1 mg/m3 VLA-ED
Spain: 3 mg/m3 VLA-EC

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Unstable.
Conditions to Avoid:
Incompatible materials, contact with water, combustible materials,
organic materials, reducing agents, temperatures above 220C,
heating to decomposition, dehydrating agents, oxidizers, amines,
bases.
Incompatibilities with Other Materials:
Strong oxidizing agents are incompatible with selenium dioxide. For a
complete description of the incompatibles associated with sulfuric
acid and perchloric acid please refer to the NFPA Fire Protection
guide for the specific details.
Hazardous Decomposition Products:
Oxides of sulfur, chlorine dioxide, which may be spontaneously
explosive.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7446-08-4: VS8575000
CAS# 7601-90-3: SC7500000
CAS# 7664-93-9: WS5600000
LD50/LC50:
CAS# 7446-08-4: Oral, mouse: LD50 = 23300 ug/kg; Oral, rat: LD50 =
68100 ug/kg.
CAS# 7601-90-3: Oral, rat: LD50 = 1100 mg/kg.
CAS# 7664-93-9: Draize test, rabbit, eye: 250 ug Severe; Inhalation,
mouse: LC50 = 320 mg/m3/2H; Inhalation, mouse: LC50 = 320 mg/m3;
Inhalation, rat: LC50 = 510 mg/m3/2H; Inhalation, rat: LC50 = 510
mg/m3; Oral, rat: LD50 = 2140 mg/kg.
Carcinogenicity:
Selenium dioxide -
Not listed by ACGIH, IARC, or NTP.
Perchloric acid -
Not listed by ACGIH, IARC, or NTP.
Sulfuric acid -
ACGIH: A2 - Suspected Human Carcinogen (contained in strong inorg
California: carcinogen, initial date 3/14/03 (listed as Strong inorgan
NTP: Known carcinogen (listed as Strong inorganic acid mists co
IARC: Group 1 carcinogen
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: SULPHURIC ACID, SOLUTION
Hazard Class: 8
UN Number: 1830
Packing Group: II
IMO
Shipping Name: SULPHURIC ACID, SOLUTION
Hazard Class: 8
UN Number: 1830
Packing Group: II
RID/ADR
Shipping Name: SULPHURIC ACID, SOLUTION
Hazard Class: 8
UN Number: 1830
Packing group: II
USA RQ: CAS# 7446-08-4: 10 lb final RQ; 4.54 kg final RQ
USA RQ: CAS# 7664-93-9: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 35 Causes severe burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 30 Never add water to this product.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7446-08-4: 2
CAS# 7601-90-3: 1
CAS# 7664-93-9: 2
Canada
CAS# 7446-08-4 is listed on Canada's DSL List.
CAS# 7601-90-3 is listed on Canada's DSL List.
CAS# 7664-93-9 is listed on Canada's DSL List.
CAS# 7446-08-4 is listed on Canada's Ingredient Disclosure List.
CAS# 7601-90-3 is listed on Canada's Ingredient Disclosure List.
CAS# 7664-93-9 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7446-08-4 is listed on the TSCA inventory.
CAS# 7601-90-3 is listed on the TSCA inventory.
CAS# 7664-93-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 35 Causes severe burns.
R 5 Heating may cause an explosion.
R 8 Contact with combustible material may cause fire.
MSDS Creation Date: 12/12/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dri-Decon
N,N-Dimethylcyclohexylamine, 99% 98-94-2
Decon 90 0-01-1
Zinc sulfate 0.05M solution 7732-18-5
Benzoylhydrazine, 98% 613-94-5
Iron (III) Chloride Solution 7705-08-0
Diisopropyl phosphite, 98% 1809-20-7
Benzyltriethylammonium Cyanate 0-00-1
Acrylonitrile 107-13-1
Ethanol, Absolute 64-17-5
L(+)Arabinose 87-72-9
Rennet 9001-98-3
Kjeldahl digestion reagent 7446-08-4
Kjeldahl phenol reagent (alkaline) 108-95-2
1,4-Benzodioxan-6-yl methyl ketone, 98% 2879-20-1
Indicator concentrate solution 61-73-4
Sodium Hydroxide/Sodium Thiosulfate Solution 1310-73-2
Oxygen mixture 1313-13-9
AA Flame Calibration Standard 7447-40-7
Chemicon A 139-33-3
Hydrochloric Acid, 28.0% 7647-01-0
Spectroflux R 100 12007-60-2
Chemicon B 7664-93-9
bis(Triphenylphosphine)dicarbonylnickel 13007-90-4
Solmix 64-17-5
Sodium acetate buffer solution 64-19-7
Polyurethane foam (polymer B) 0-00-0
Lanthanum Chloride Solution 7647-01-0
Martius yellow, biological stain and chemical indicator 605-69-6
Trans-Stilbene Oxide, 99% 1439-07-2
Sodium Acetate Buffer Solution with 5.0% Triton X-100 64-19-7
Trimethylamine 25% in methanol 65-55-0
Turpentine Substitute (White Spirit) 64742-88-7
CHAPSO 82473-24-3
Isonipecotamide, 98% 39546-32-2
CHAPS 75621-03-3
Xylene Cyanole FF 2650-17-1
Bovine Serum Albumin 9048-46-8
Lysozyme, Egg White 12650-88-3
BES 10191-18-1
TAPS (Free Acid) 29915-38-6
Ficoll 400 26873-85-8
PBS Phosphate Buffered Saline 7447-40-7
Denhardt's Reagent 50X Solution 7732-18-5
Cesium Sulfate, 98% (Titr.) 10294-54-9
Protein Gel Loading Dye 0-00-0
Denhardt's Reagent 50X Powder 150 mg 9003-39-8
Agarose Gel Loading Dye 0-00-0
Glycerol Gel Loading Dye 5X 0-00-0
Sequencing Gel Loading Dye 0-00-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net