Search   
MSDS 
:
 Petroleum Ether 60/80
CAS 
:
 0-00-0
SYNONYMS 
:
 Ligroine; Refined solvent
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| Not available |Hexanes | 35.0 | unlisted |
|----------------|--------------------------------------|----------|-----------|
| 110-54-3 |N-Hexane | <50.0 | 203-777-6 |
|----------------|--------------------------------------|----------|-----------|
| 110-82-7 |Cyclohexane | 10.0 | 203-806-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XN F N
Risk Phrases: 11 38 48/20 62 51/53 65 67

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to skin. Harmful : danger of serious
damage to health by prolonged exposure through inhalation. Possible
risk of impaired fertility. Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment. Harmful: may
cause lung damage if swallowed. Vapours may cause drowsiness and
dizziness.Highly flammable.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Prolonged and/or repeated contact may cause irritation and/or
dermatitis. Exposure may cause irritation characterized by redness,
dryness, and inflammation. May cause cyanosis of the extremities.
Ingestion:
Aspiration hazard. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. May cause central nervous system
depression, characterized by excitement, followed by headache,
dizziness, drowsiness, and nausea. Advanced stages may cause
collapse, unconsciousness, coma and possible death due to respiratory
failure. Aspiration of material into the lungs may cause chemical
pneumonitis, which may be fatal.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. High vapor concentrations may cause drowsiness. Aspiration
may lead to pulmonary edema. Vapors may cause dizziness or
suffocation. May cause burning sensation in the chest.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic
exposure to vapors may produce polyneuropathy.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Possible aspiration hazard. Get medical aid
immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Use water
spray to keep fire-exposed containers cool. Vapor may cause flash
fire. Water may be ineffective. Material is lighter than water and a
fire may be spread by the use of water. Containers may explode in the
heat of a fire. Flammable liquid and vapor. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Will be easily ignited by heat, sparks or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. This material is lighter than
water and insoluble in water. The fire could easily be spread by the
use of water in an area where the water cannot be contained. Do NOT
use straight streams of water. Cool containers with flooding
quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors. Water spray may
reduce vapor but may not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Prevent build up of vapors to explosive concentration. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 0-00-0:

CAS# 110-54-3:
United Kingdom, WEL - TWA: 20 ppm TWA; 72 mg/m3 TWA
United Kingdom, WEL - STEL: 60 ppm STEL; 216 mg/m3 STEL
United States OSHA: 500 ppm TWA; 1800 mg/m3 TWA
Belgium - TWA: 50 ppm VLE; 179 mg/m3 VLE
France - VME: 50 ppm VME; 170 mg/m3 VME
Germany: 50 ppm TWA; 180 mg/m3 TWA
Japan: 40 ppm OEL; 140 mg/m3 OEL
Malaysia: 50 ppm TWA; 176 mg/m3 TWA
Netherlands: 25 ppm MAC; 90 mg/m3 MAC
Russia: 300 mg/m3 TWA
Spain: 50 ppm VLA-ED; 179 mg/m3 VLA-ED
CAS# 110-82-7:
United Kingdom, WEL - TWA: 100 ppm TWA; 350 mg/m3 TWA
United Kingdom, WEL - STEL: 300 ppm STEL; 1050 mg/m3 STEL
United States OSHA: 300 ppm TWA; 1050 mg/m3 TWA
Belgium - TWA: 300 ppm VLE; 1045 mg/m3 VLE
France - VME: 300 ppm VME; 1050 mg/m3 VME
France - VLE: 375 ppm VLE; 1300 mg/m3 VLE
Germany: 200 ppm TWA; 700 mg/m3 TWA
Japan: 150 ppm OEL; 520 mg/m3 OEL
Malaysia: 300 ppm TWA; 1030 mg/m3 TWA
Netherlands: 250 ppm MAC; 875 mg/m3 MAC
Russia: 80 mg/m3 TWA
Spain: 300 ppm VLA-ED; 1050 mg/m3 VLA-ED
Spain: 600 ppm VLA-EC; 2100 mg/m3 VLA-EC

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: mild paraffinic
pH: Not available.
Vapor Pressure: 155 hPa
Viscosity: 0.5mm2/s
Boiling Point: 60-80C
Freezing/Melting Point: Not available.
Autoignition Temperature: 240 deg C ( 464.00 deg F)
Flash Point: -30 deg C ( -22.00 deg F)
Explosion Limits, lower: 0.8 VOL %
Explosion Limits, upper: 8.0 VOL %
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.670
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-00-0 unlisted.
CAS# 110-54-3: MN9275000
CAS# 110-82-7: GU6300000
LD50/LC50:
Not available.
CAS# 110-54-3: Draize test, rabbit, eye: 10 mg Mild; Inhalation,
mouse: LC50 = 150000 mg/m3/2H; Inhalation, rat: LC50 = 48000 ppm/4H;
Inhalation, rat: LC50 = 627000 mg/m3/3M; Oral, rat: LD50 = 25 gm/kg.
CAS# 110-82-7: Draize test, rabbit, skin: 1548 mg/2D (Intermittent);
Inhalation, mouse: LC50 = 70000 mg/m3/2H; Oral, mouse: LD50 = 813
mg/kg; Oral, rat: LD50 = 12705 mg/kg.
Carcinogenicity:
Hexanes -
Not listed by ACGIH, IARC, or NTP.
N-Hexane -
Not listed by ACGIH, IARC, or NTP.
Cyclohexane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Petroleum distillates, n.o.s
Hazard Class: 3
UN Number: 1268
Packing Group: II
IMO
Shipping Name: PETROLEUM DISTILLATES, N.O.S
Hazard Class: 3
UN Number: 1268
Packing Group: II
RID/ADR
Shipping Name: PETROLEUM DISTILLATES, N.O.S.
Hazard Class: 3
UN Number: 1268
Packing group: II
USA RQ: CAS# 110-54-3: 5000 lb final RQ; 2270 kg final RQ
USA RQ: CAS# 110-82-7: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F N
Risk Phrases:
R 11 Highly flammable.
R 38 Irritating to skin.
R 48/20 Harmful : danger of serious damage to health
by prolonged exposure through inhalation.
R 51/53 Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
R 62 Possible risk of impaired fertility.
R 65 Harmful: may cause lung damage if swallowed.
R 67 Vapours may cause drowsiness and dizziness.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
S 36/37 Wear suitable protective clothing and
gloves.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
S 62 If swallowed, do not induce vomiting: seek
medical advice immediately and show this container or
label.
WGK (Water Danger/Protection)
CAS# 0-00-0: No information available.
CAS# 110-54-3: 1
CAS# 110-82-7: 1
Canada
CAS# 110-54-3 is listed on Canada's DSL List.
CAS# 110-82-7 is listed on Canada's DSL List.
CAS# 0-00-0 is not listed on Canada's Ingredient Disclosure List.
CAS# 110-54-3 is listed on Canada's Ingredient Disclosure List.
CAS# 110-82-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-0 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 110-54-3 is listed on the TSCA inventory.
CAS# 110-82-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 11 Highly flammable.
R 38 Irritating to skin.
R 48/20 Harmful : danger of serious damage to health by
prolonged exposure through inhalation.
R 62 Possible risk of impaired fertility.
R 51/53 Toxic to aquatic organisms, may cause long-term
adverse effects in the aquatic environment.
R 65 Harmful: may cause lung damage if swallowed.
R 67 Vapours may cause drowsiness and dizziness.
MSDS Creation Date: 3/12/1998 Revision #10 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sucrose Gel Loading Dye 0-00-0
Bilirubin, 99% (UV-VIS) 635-65-4
Octylmethyldichlorosilane, 98% 14799-93-0
Trimethylsulfoxonium Iodide, 98% 1774-47-6
Hafnium(IV) oxide, 98% 12055-23-1
Glycine, Sodium Salt Hydrate 99% 6000-44-8
Tris-succinate, 99% 84540-64-7
1,6-Diaminohexane 5.0% in water 124-09-4
Hydrofluoric Acid 58.0-62.0% 7664-39-3
Hydrogen Peroxide 200 Volumes 7722-84-1
Hydrogen Peroxide 40 Volumes 7722-84-1
Methylamine 25/30% w/v Solution in Water 74-89-5
Potassium Hydroxide Solution 2M and 2.6N 1310-58-3
Sodium Chloride 0.1M (0.1N) 7647-14-5
Sodium Nitrite 0.5M(0.5N) Solution 7632-00-0
Indol-3-ylacetic acid 0.1% in lanolin 87-51-4
1,4-Dicyanobutane (Adiponitrile), 99% 111-69-3
1-Octanesulfonic acid sodium salt 0.1M 5324-84-5
Sodium persulfate solution 1M 7732-18-5
Sodium Selenate Solution 40.0% w/w 7732-18-5
1-Bromo-4,4,4-trifluorobutane, 99% 406-81-5
Ammonium Iron (III) Sulfate 0.2M (0.2N) 7783-83-7
Ammonium Iron (II) Sulfate 0.025M (0.2N) and 0.1M (0.1N) 7732-18-5
4-Chloro-2-nitrobenzyl chloride, 98% 938-71-6
L-Leucyl-L-phenylalanine-N-methylamide 0-00-0
PBNS ((3-Sulphonyl)naphthyl-(1-sulphonyl)-4,4'-diphenylmethanone 0-00-0
N-(2-Bromoethyl)-Phthalimide, 99+% 574-98-1
Poly(Vinyl Benzyl Chloride) 0-00-0
Potassium Hydroxide/Lithium Hydroxide Solution 1310-58-3
Rhodamine B Isothiocyanate 36877-69-7
SafeFix II 64-17-5
3-(2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine 99+% 1046-56-6
Bismuth Subnitrate 1304-85-4
2,6-Lutidine, Spectro Grade, 99% (GC) 108-48-5
4-Methoxybenzyloxycarbonyl azide 25474-85-5
Chloroethane 75-00-3
1-Trityl-4-Iodoimidazole 96797-15-8
95% Ethyl Alcohol 64-17-5
3-Methyl-3-Penten-2-One 565-62-8
Ethyl cis-2-amino-1-cyclohexane-carboxylate hydrochloride, 95% 1127-99-7
Carbonic Acid 124-38-9
Petroleum Ether 30/40 109-66-0
Petroleum Ether 40/60 0-00-0
Petroleum Ether 60/80 0-00-0
Petroleum Ether 80/100 108-87-2
Petroleum Ether 100/120 108-87-2
Petroleum Ether 120/140 64742-49-0
Thymol Blue 0.04% Solution 64-17-5
3-(Chloromethyl)heptane, 98+% 123-04-6
Phosphorus standards 7732-18-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net